Two copper plates 0.50cm thick have a 0.10mm sheet of glass sandwiched between them. One copper...

Two copper plates 0.50cm thick have a 0.10mm sheet of glass sandwiched between them. One copper plate is kept in contact with flowing ice water and the other is in contact with stream. What are the temperatures of the two copper-glass interfaces, and what is the power transferred through a 10cm by 10cm area? kcopper=385 K/mC and kglass=0.8 K/mC

The answers given are: 9C, 91 C, and 6.6E3 W. I am just trying to learn the process of solving problems like this and my closest answer was 7837 W, which is still off.

Expert Solution

genius_generous answered 1 year ago

A 5.3-cm-thick layer of oil (n=1.46) is sandwiched between a 1.1-cm-thick sheet of glass and a...

A 5.3-cm-thick layer of oil (n=1.46) is sandwiched between a 1.1-cm-thick sheet of glass and a 2.0-cm-thick sheet of polystyrene plastic (n=1.59). How long (in ns) does it take light incident perpendicular to the glass to pass through this 8.4-cm-thick sandwich? A 2.0-cm-wide diffraction grating has 1000 slits. It is illuminated by light of wavelength 570 nm . What are the angles of the first two diffraction orders?

A clay layer in field is 3-m thick and is sandwiched between two sand layers (drained...

A clay layer in field is 3-m thick and is sandwiched between two sand layers (drained from top and bottom). The saturated stratum of clay is under a surcharge loading and underwent 90% primary consolidation in 75 days. The time required in minutes for a 30 mm thick undisturbed clay sample obtained from the field to undergo 90% consolidation in laboratory is most nearly equal to Select one: a. 28 b. 67.5 c. 100 d. 10

How thick (minimum) should the air layer be between two flat glass surfaces if the glass...

How thick (minimum) should the air layer be between two flat glass surfaces if the glass is to appear bright when 510 nm light is incident normally? nm What if the glass is to appear dark? nm

Two flat plates of glass with parallel faces are on a table, one plate on the...

Two flat plates of glass with parallel faces are on a table, one plate on the other. Each plate is 11.0 cm long and has a refrac- tive index of 1.55. A very thin sheet of metal foil is inserted under the end of the upper plate to raise it slightly at that end, in a man- ner similar to that discussed in Example 35.4. When you view the glass plates from above with reflected white light, you observe that,...

You have two conducting plates with nothing in between them. Using a voltmeter, you measure the...

You have two conducting plates with nothing in between them. Using a voltmeter, you measure the voltage difference between the plates to be 465 V. You release an alpha particle with mass of 6.5×10-27 kg and a charge of 3.2×10-19 C from near the positive plate. What is the kinetic energy of the alpha particle when it reaches the other plate? The distance between the plates is 44.0 cm. b.) You observe an electron move through a uniform electric field....

A copper wire is strung between two plates. Find how hot the air can be before...

A copper wire is strung between two plates. Find how hot the air can be before the wire starts to melt. Given: h = 20 W/m2/K k= 415 W/m/K The temperature of the plates is 100 C The melting temperature of copper is 1100 C. it has a length of 30mm and thickness of 1mm

Two large parallel copper plates are 3.60 cm apart and have a uniform electric field of...

Two large parallel copper plates are 3.60 cm apart and have a uniform electric field of magnitude E = 7.98 N/C between them (see the figure). An electron is released from the negative plate at the same time that a proton is released from the positive plate. Neglect the force of the particles on each other and find their distance from the positive plate when they pass each other.

A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42). 1.For...

A sheet of glass is coated with a 501-nm-thick layer of oil (n = 1.42). 1.For what visible wavelengths of light do the reflected waves interfere constructively? 2.For what visible wavelengths of light do the reflected waves interfere destructively? 3.What is the color of reflected light? Red Yellow Orange Green-blue 4.What is the color of the most part of transmitted light? Yellowish green Blue Orange Red

The lab experiment is repeated with the same two glass plates but with a different human...

The lab experiment is repeated with the same two glass plates but with a different human hair. The sodium vapor lamp is replaced by a monochromatic light source that produces light of wavelength ?air = 660 nm. The separation between adjacent dark fringes is measured to be 0.485 mm. Calculate the diameter of the hair. (The length of the plates is 12.0 cm.)

A sheet of glass (n=1.50) is coated with a 500nm -thick layer of oil (n=1.42). Part...

A sheet of glass (n=1.50) is coated with a 500nm -thick layer of oil (n=1.42). Part A For what visible wavelengths of light do the reflected waves interfere constructively? The range of wavelength of visible light is from 380 nm to 750 nm. Enter your answers numerically separated by commas. Part B For what visible wavelengths of light do the reflected waves interfere destructively? Enter your answers numerically separated by commas.

Question