(a)Air, which can be assumed to behave as an ideal gas, undergoes a process from 150kPa...

(a)Air, which can be assumed to behave as an ideal gas, undergoes a process from 150kPa and 400K to 600kPa and 500K within a piston cylinder. Can this process occur adiabatically? (Think about what the limitations on ???? are to answer this question). (b)Now consider air which is compressed in an air compressor adiabatically from 150kPa and 400K to 1000K and 600kPa. It enters the air compressor with a mass flow rate of 1kg/s. Determine the rate of entropy produced during the process in ??j/(s*k)

please answer both questions

the ones that are posted are wrong

Expert Solution

samet mamat answered 2 years ago

The volume of some air, assumed to be an ideal gas, in the cylinder of a...

The volume of some air, assumed to be an ideal gas, in the cylinder of a car engine is 540cm^3 at a pressure of 1.1 x 10^5 Pa and a Temperature of 27 Degree celsius. The air is suddenly compressed, so that no thermal energy enters or leaves the gas, to a volume of 30cm^3. The pressure rises to 6.5 x 10^6 Pa. Determine the Temperature of the gas after compression.

2 kilograms of ideal gas air undergoes an isothermal expansion from 3MPa and 300K to 1Mpa....

2 kilograms of ideal gas air undergoes an isothermal expansion from 3MPa and 300K to 1Mpa. Determine the work done, the change in specific internal energy, and the heat transferred.

An ideal gas undergoes an isothermal expansion from one state to another. In this process determine the...

An ideal gas undergoes an isothermal expansion from one state to another. In this process determine the following (using the sign conventions on page 413): Q = 0, Q > 0 or Q < 0 W = 0, W > 0 or W < 0 ΔU = 0, ΔU > 0 or ΔU < 0 An ideal gas undergoes an isothermal process. Which of the following are true (may be more than one): a) No heat is added or removed from the gas,...

One mole of an ideal gas undergoes a process where the pressure varies according to P...

One mole of an ideal gas undergoes a process where the pressure varies according to P = (-17.0 atm/m6) V2 + (32.5 atm/m3) V + 1.80 atm where V is the volume. The volume initially starts at 0.0265 m3 and ends at a value of 1.05 m3. Generate an accurate P-V graph for this situation. Determine the initial and final temperatures for this situation. Determine the change in internal energy for this situation. Determine the work done for this situation....

Which gas would you expect to behave more like an ideal gas; HCl, H2O, or He?...

Which gas would you expect to behave more like an ideal gas; HCl, H2O, or He? Why?

Consider a process in which one mole of a monatomic ideal gas is compressed from a...

Consider a process in which one mole of a monatomic ideal gas is compressed from a volume of V1 =1.459m3 to V2 =1m3 at a constant temperature of T =353.7 K. (a) What is the entropy change of the gas (in J/K units)? (b) What is the change in the value of PV for the gas (in J units)? (c) What is the energy change of the gas (in J units)? (d) What is the enthalpy change of the gas...

23 mg of nitrogen gas, assumed to behave ideally, at a pressure of 88 torr and...

23 mg of nitrogen gas, assumed to behave ideally, at a pressure of 88 torr and at 22oC undergoes an adiabatic free expansion into a vacuum (Joule experiment) to a final pressure of 34 torr. a) Is the process reversible? Why or why not? b) What is the final temperature of the system? Why? [ answer should be 22oC] c) What is ∆S for the system?

Calculate q, w, ∆U and ∆H for 1.00 mole of a monatomic ideal gas which undergoes...

Calculate q, w, ∆U and ∆H for 1.00 mole of a monatomic ideal gas which undergoes a change of state along two different paths. (Note that the initial and final states are the same for both paths.) Report all energies in joules. Path I: Reversible isothermal compression at T= 298 K from 1.00 bar to 2.00 bar. Path II: (2 steps) 1. Isobaric (constant pressure) cooling of the gas at 1.00 bar until the volume of the gas is equal...

Shows a new process in which 0.0100 kg of methane (an ideal gas) is compressed from...

Shows a new process in which 0.0100 kg of methane (an ideal gas) is compressed from a pressure of 0.100 MPa and a temperature of 20.0 °C to a pressure of 10.0 MPa in a polytropic process with n = 1.35. Determine the moving boundary work required. Determine the work required in Example 4.5 if the final pressure of the methane is 0.500 MPa. If the work required in Example 4.5 is ?5.00 kJ, determine the final temperature and pressure...

1. What is meant by an ideal gas? Under what conditions does a real gas behave...

1. What is meant by an ideal gas? Under what conditions does a real gas behave most like an ideal gas? 2. How many moles of nitrogen are in a 2145 mL sample of the gas at 1500. torr and 120 degree of Celsius? 3. Chlorine reacts with sulfite ion in the presence of water to give sulfate ion and chloride ion How many milliliters of Cl2 gas measured at 25 degree of Celsius and 734 torr are required to...

Question