Find the work (in ft-lb) required to pump all the water out of a cylinder that...

Find the work (in ft-lb) required to pump all the water out of a cylinder that has a circular base of radius 6 ft and height 200 ft. Use the fact that the weight-density of water is 62.4 lb/ft3.

Find the work (in ft-lb) required to pump all the water out of the cylinder if the cylinder is only half full.

Expert Solution

milcah answered 2 years ago

1) A tank is full of water. Find the work W required to pump the water...

1) A tank is full of water. Find the work W required to pump the water out of the spout. (Use 9.8 m/s2 for g. Use 1000 kg/m3 as the weight density of water. Assume that a = 4 m, b = 4 m, c = 12 m,and d = 1 m.) W = ___ J I got 5017600 then in scientific notation it would be 5.0176 X 10^6, then in Juls in would be 5.02? I got the answer...

A pump is to lift water from a source 10 ft below pump centerline and to...

A pump is to lift water from a source 10 ft below pump centerline and to be discharged to a tank 60ft above pump centerline. The installation uses 3”∅ and 2.5 “∅ pipe for suction and discharge, respectively. A pump is to handle 200 gpm of water at 80°F. The loss of head due to friction can be estimated equal to 8.5 ft. Determine: A) TDH B) WHP C)BHP if np = 60% D)time required to fill the cylindrical tank...

Find the work done by pumping out water from a tank of the shape of (a)...

Find the work done by pumping out water from a tank of the shape of (a) a sphere, (b) a circular cone Please give a detailed explanation of how you would set up to solve a problem like this

A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water...

A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water undergoes two processes in series: a constant-pressure process followed by a constant volume process. At the end of the constant-volume process, the temperature is 300°F and the water is a two-phase liquid–vapor mixture with a quality of 50%. Neglect kinetic and potential energy effects. Determine the work and heat transfer for each process, all in Btu.

A 180-lb person jumps out of an airplane with initial upward velocity of 5 ft/s at...

A 180-lb person jumps out of an airplane with initial upward velocity of 5 ft/s at a height of 3000 ft (assuming the air resistance is proportional to its falling speed). The air resists the body's motion with a force of 2 lb for each ft/s of speed. Assuming the constant gravity is 32 ft/s^2 (1) find its velocity v = v(t) (2) find its terminal velocity (3) find the distance of falling x = x(t) (4) find the duration...

Part A: How much work (in J) is required to expand the volume of a pump...

Part A: How much work (in J) is required to expand the volume of a pump from 0.0 L to 2.8 L against an external pressure of 1.2 atm ? Express your answer using two significant figures. W = Part B: What is the mass of the silver block? Express your answer to two significant figures and include the appropriate units. A silver block, initially at 55.6 ∘C, is submerged into 100.0 g of water at 24.2 ∘C, in an...

4) Interest (Show all of your work!) Find the interest rate required for an investment of...

4) Interest (Show all of your work!) Find the interest rate required for an investment of $10,000 to grow to $15,000 in 5 years if the interest is compounded as follows: a) Annually b) Quarterly 5) Inflation (Show all of your work!) Assuming annual compounding, find the time it would take for the general level of prices, in the economy, to double at the following annual inflation rates: a) 3% b) 8% 6) Time to Double (Show all of your...

When operated at N = 1170 rpm, a centrifugal pump, with impeller D = 8in., has a shutoff head ho = 25.0 ft of water.

When operated at N = 1170 rpm, a centrifugal pump, with impeller D = 8in., has a shutoff head ho = 25.0 ft of water. At the same operating speed, best efficiency occurs at Q = 300 gpm, where the head is h = 21.9 ft of water. Fit these data at 1170 rpm with a parabola. Scale the results to a new operating speed of 1750 rpm. Plot and compare the results.

Look up “heat pump” on the Internet. What can you find out about the coefficient of...

Look up “heat pump” on the Internet. What can you find out about the coefficient of performance (COP)? What is the cost? Would a heat pump be a good investment in the area where you live? (Don’t guess. Work out some numbers.)

How do I find the density of water using the density of an empty graduated cylinder...

How do I find the density of water using the density of an empty graduated cylinder that weighs 86.246g and also using the mass of a graduated cylinder with 10 mL of water that weighs 95.980g How do I find the density of ethanol using the density of an empty graduated cylinder that weighs 86.246g and also using the mass of a graduated cylinder with 10 mL of ethanol that weighs 93.945g Specific gravity is defined as the density of...

Question