Question

In: Physics

A physicist builds a parallel-plate capacitor with adjustable spacing between the plates. When the plates are...

A physicist builds a parallel-plate capacitor with adjustable spacing between the plates. When the plates are at their initial separation, the capacitance is 7.00 µF.

(a) At this capacitance, the capacitor is connected to a 18.00 V battery. After fully charging, how much energy (in µJ) is stored in the capacitor?

(b) The battery is then disconnected. Without discharging the capacitor, the physicist then doubles the separation between the plates. At this point, how much energy (in µJ) is stored in the capacitor?

(c) Without changing this new separation between the plates, the capacitor is discharged, and then reconnected to the 18.00 V battery. Now, after fully charging, how much energy (in µJ) is stored in the capacitor?

Solutions

Expert Solution


Related Solutions

A parallel plate air capacitor with no dielectric between the plates is connected to a constant...
A parallel plate air capacitor with no dielectric between the plates is connected to a constant voltage source. How would the capacitance and the charge change if a dielectric of dielectric constant K=2 is inserted between the plates. C0 and Q0 are the capacitance and charge of the capacitor before the introduction of the dielectric.
A parallel-plate capacitor has capacitance C = 15.7 pF when the volume between the plates is...
A parallel-plate capacitor has capacitance C = 15.7 pF when the volume between the plates is filled with air. The plates are circular, with radius 2.50 cm. The capacitor is connected to a battery and a charge of magnitude 28.0 pC goes into each plate. With the capacitor still connected to the battery, a slab of dielectric is inserted between the plates, completely filling the space between the plates. After the dielectric has been inserted, the charge on each plate...
A parallel-plate capacitor has capacitance C0 = 7.80 pF when there is air between the plates....
A parallel-plate capacitor has capacitance C0 = 7.80 pF when there is air between the plates. The separation between the plates is 1.80 mm. 1- What is the maximum magnitude of charge that can be placed on each plate if the electric field in the region between the plates is not to exceed 3.00×104 V/mV/m? Express your answer with the appropriate units. 2- A dielectric with KKK = 2.40 is inserted between the plates of the capacitor, completely filling the...
An air-filled parallel-plate capacitor has a capacitance of 2.0 F when the plate spacing is 1.6...
An air-filled parallel-plate capacitor has a capacitance of 2.0 F when the plate spacing is 1.6 mm. (a) What is the area of the plates? (b) What is the maximum voltage Vmax that can be applied to this capacitor (before dielectric breakdown occurs)? (c) How much charge is stored on the capacitor when Vmax is across it? (d) How much energy is stored on the capacitor when Vmax is across it? (e) A piece of Plexiglas (with a dielectric constant...
When a potential difference of 142 V is applied to the plates of a parallel-plate capacitor,...
When a potential difference of 142 V is applied to the plates of a parallel-plate capacitor, the plates carry a surface charge density of 45.0 nC/cm2. What is the spacing between the plates?
1) A parallel plate capacitor is connected to a battery. The electric field between the plates...
1) A parallel plate capacitor is connected to a battery. The electric field between the plates is E. While still connected to the battery, we move the plates so that their plate separation is now twice as large. What is the electric field between the plates now? E/4. E. E/2. 4E. 2E. 2) A parallel plate capacitor with capacitance Co is fully charged. The plates are in the shape of a disk. If the diameter of the disk is doubled...
A dielectric slab is slowly inserted between the plates of a parallel plate capacitor while the...
A dielectric slab is slowly inserted between the plates of a parallel plate capacitor while the capacitor is connected to a battery. As it is being inserted:
you have a parallel-plate capacitor a.) determine the electric field between the plates if there is...
you have a parallel-plate capacitor a.) determine the electric field between the plates if there is a 120 V potential dofference across the plated and they are separated by 0.5 cm b.) A spark will jump if the magnitude of the electrix field between the plates exceeds 3.0x10^6 V/m when air separates the plates. what is the closest the plated can be place to esch ither without sparking c.) if a dialectric (k=2.5) is inserted between the plates how will...
A parallel plate capacitor consisting of square plates is charged. One edge of the plates is...
A parallel plate capacitor consisting of square plates is charged. One edge of the plates is 0.4 (m). When the current is 5 (A), the rate of change of the electric field between the plates is approximately how many V / (m.s). Eo = 8.85x10-12 (SI)
The plates of an air-filled parallel-plate capacitor with a plate area of 15.0 cm2 and a...
The plates of an air-filled parallel-plate capacitor with a plate area of 15.0 cm2 and a separation of 8.95 mm are charged to a 170-V potential difference. After the plates are disconnected from the source, a porcelain dielectric with κ = 6.5 is inserted between the plates of the capacitor. (a) What is the charge on the capacitor before and after the dielectric is inserted? Qi = C Qf = C (b) What is the capacitance of the capacitor after...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT