Question
In: Civil Engineering
A simply supported beam of length 7m has a concentrated couple Mo (counter clockwise) of 10kNm...
A simply supported beam of length 7m has a concentrated couple Mo (counter clockwise) of 10kNm applied at one end.
Using DIM(Double Integration Method):
- The maximum deflection is located at what distance from the applied load?
- Calculate the maximum deflection assuming E = 200 GPa and I = 60x10^6 mm4
Solutions
Ally Wells answered 1 year agoRelated Solutions
Consider a simply supported beam of length L. The beam experiences a parabolically varying distributed load...
Consider a simply supported beam of length L. The beam
experiences a parabolically varying distributed load that varies
from 0 at the left support, to a maximum w at midspan, and back to
0 at the right support. The beam has stiffness properties EI. Give
a mathematical equation that gives the value of the distributed
load intensity at any distance z along the beam in terms of w, L
and z. Draw the SFD and BMD of the beam, giving...
A simply supported 7 ft long solid wooden beam is designed to carry a concentrated load...
A
simply supported 7 ft long solid wooden beam is designed to carry a
concentrated load P = 600 lbf in the center. The distance between
supports is 72 inches. The cross sectional area is 2” (inches) wide
and 6” (inches) high. Determine the moment of mass of the beam
(lbm), inertia (in4) and deflection (in). This wood has the
following material properties: Modulus of elasticity = 2.5 x 106
psi and Density = 40 lbm/ft3.
A 35 ft simply supported beam is loaded with concentrated loads 15 ft in from each...
A 35 ft simply supported beam is loaded with concentrated loads
15 ft in from each support. On one end, the dead load is 8.0 kips
and the live load is 18.0 kips. At the other end, the dead load is
4.0 kips and the live load is 9.0 kips. Include the self-weight of
the beam in the design. Lateral supports are provided at the
supports and the load points. Determine the least-weight W-shape to
carry the load. Use A992...
Wood beam Question. A simply supported #1 DF-L (Douglas Fir-Larch) beam 8 foot in length has...
Wood beam Question.
A simply supported #1 DF-L (Douglas Fir-Larch) beam 8 foot in
length has a point load of 2K at mid span. The beam is 4 x 8 in the
strong axis orientation, and is fully braced, the moisture content
is less than 19% and the max deflection is L/360. (include the
weight of the beam in your calculations)
Find the Tabulated stresses.
Find the Allowable stresses
Find the Actual stresses
Is the member adequate.
Using the same...
Q1/ A simply supported isolated (T) beam have span length of (6m) subject to the ultimate...
Q1/ A simply supported isolated (T) beam have span length of
(6m) subject to the ultimate design moment (Mu=705 kN.m) (including
the moment from the self weight of the beam). Beam dimensions are:
d=500mm, hf=125mm, bw=250mm, and b=500mm. for , find the steel
reinforcement at the center of the beam and find the total depth
(h) of the beam. (Use 010mm for shear reinforcement and 036mm for
longitudinal reinforcement
simply supported beam of length 8m carries UDL of 15N per meter for the entire span...
simply supported beam of length 8m carries UDL of 15N per meter for
the entire span . also have point load of 4KN 1.5m from left
support 7KN 2m from right support and 10 KN acting at the centre of
beam . draw shear force snd bending moment diagram and calculate
the maximum bending moment
What is the significance of the simply supported beam bridge and what is the implication simply...
What is the significance of the simply supported beam
bridge and what is the implication simply supported beam is applied
on the bridge?
A beam 3m long is simply supported at its ends. The beam is loaded with a...
A beam 3m long is simply supported at its ends. The beam is
loaded with a downward vertical load of 200N at a point 2m from the
left support.
USING AMM.
a.) The maximum deflection is located at what distance from the
left support? Answer: 1.63m
b.) Calculate the maximum deflection assuming E = 50 GPa and I =
1x10^6 mm4 Answer 2.9mm
Consider a concrete beam in an interior environment as follows: a. The beam is simply supported...
Consider a concrete beam in an interior environment as follows:
a. The beam is simply supported with a design span of 4.8 metres.
b. The dead load in the beam is uniformly distributed. c. Dead load
on the beam, in addition to its own weight, is 6.9 KN/m of which
75% is permanent (long term). d. The beam carries a single
concentrated live load at mid-span of 70 KN. e. 20% of the live
load is considered short term. f....
A beam 3m long is simply supported at its ends. The beam is loaded with a...
A beam 3m long is simply supported at its ends. The beam is
loaded with a downward vertical load of 200N at a point 2m from the
left support.
Using DIM:
a. The maximum deflection is located at what distance from the
left support?
b. Calculate the maximum deflection assuming E = 50 GPa and I =
1x10^6 mm4
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- 1. Show the steps in merging A and B into C where A= 8, 12, 19,...
- 1. Given the following information, determine the beta coefficient for Stock L that is consistent with...
- Generate the first ten rows of Pascal triangle using MATLAB. Post code in the response
- Describe “downsizing” and explain the use of “ombudspersons” and “alternative dispute” resolution. Give some incidents and...
- You are the chairman of the board of directors for an innovative technology company, and you...
- Describe how common law has influenced the development of health care in the 21st century. Provide...
- 1. For each of the following lists, perform a bubble sort, and show the list after...
ADVERTISEMENT