a mixture of 50%He and 50% n2 (by volume) at 300k in a 1L cylinder is...

a mixture of 50%He and 50% n2 (by volume) at 300k in a 1L cylinder is compressed in until the volume is reduced by a factor of 4. the final temperature is 500k. find entropy generated

Expert Solution

queen_honey_blossom answered 2 years ago

A gas mixture A composed of 50% ethylene (C2H4) and 50% nitrogen (N2) can be prepared...

A gas mixture A composed of 50% ethylene (C2H4) and 50% nitrogen (N2) can be prepared by blending gas mixture B (20% ethylene and 80% nitrogen by volume) and C (100% ethylene). If 43.3 L (@98.7 atm and 21.1C) of C is used to make mixture A, how many moles of B are needed? How many moles of A can be obtained? N2: Tc = 126.2 K, pc = 33.9 bar C2H4: Tc = 282.8 K, pc = 51.1 bar...

A mixture of He and N2 gas is contained in a pipe at 298 K and...

A mixture of He and N2 gas is contained in a pipe at 298 K and 1 atm total pressure which is constant throughout. At one end of the pipe at point 1 the partial pressure of He is 0.6 atm and at the other end, 0.2 m away, the partial pressure is = 0.2 atm. 1. Calculate the flux of He at steady state if DAB of the He-N2 system is 0.684 x 10-4 m2 /s. R = 8.314...

For a mixture of 20% H2, 30% H2Ov, and 50% CO2 by volume, determine the mixture...

For a mixture of 20% H2, 30% H2Ov, and 50% CO2 by volume, determine the mixture molecular weight and enthalpy at 350 K.

1. A volume of 18.0 L contains a mixture of 0.250 mole N2 , 0.250 mole...

1. A volume of 18.0 L contains a mixture of 0.250 mole N2 , 0.250 mole O2 , and an unknown quantity of He . The temperature of the mixture is 0 ∘C , and the total pressure is 1.00 atm . How many grams of helium are present in the gas mixture? 2. A gas sample has a unknown pressure with a temperature of 51 ∘C . The same gas has a pressure of 2.96 atm when the temperature...

A 2-Kg mixture of 20% N2 , 30% O2 and 50% CO2 by mass is heated...

A 2-Kg mixture of 20% N2 , 30% O2 and 50% CO2 by mass is heated to 500 K with constant volume. Find The final pressure and the total heat transfer needed.

A piston-cylinder has a volume of 1 ft3 and contains a substance initially at 50 °F...

A piston-cylinder has a volume of 1 ft3 and contains a substance initially at 50 °F and 1 atm. The system is then heated until the temperature becomes 300 °F. Determine the total heat added (Btu) and final volume (ft3) assuming the substance is: a) water, b) copper, c) neon, d) air.

How to calculate density of mixture flowing through pipe, with 50% volume of one fluid and...

How to calculate density of mixture flowing through pipe, with 50% volume of one fluid and 50% volume of another fluid? Then for the mixture if temperature, internal diameter and pressure gradient is given. 1.Calculate Reynolds number 2. Volumetric flow rate 3. Local velocity at a perpendicular distance of X from inner wall of pipe.

If 500 mg of Fe3+ and 50 mg of OH- are added to 1L of pure...

If 500 mg of Fe3+ and 50 mg of OH- are added to 1L of pure water, what will be the final equilibrium concentration of Fe3+ and OH-. Assume water does not dissociate. Fe(OH)3 => Fe3++3OH-, pKs =38.57, MWFe = 55.85 g/mol, MWOH = 17.01 g/mol

3. A graduated cylinder is filled with 50 mL of water . An aluminum cylinder is...

3. A graduated cylinder is filled with 50 mL of water . An aluminum cylinder is dropped , the water rises to 58 mL . As you also add a copper cylinder , the water rises to 64 mL . If the mass of the copper cylinder is 40 grams , find the density of the copper cylinder in g/mL. a) 5 g/mL b) 6.7 g/mL c) 2.9 g/mL d) 40 g/mL 3. A graduated cylinder is filled with 50...

find the dimensions and volume of the right circular cylinder of maximum volume inscribed in a...

find the dimensions and volume of the right circular cylinder of maximum volume inscribed in a sphere with radius 50cm

Question