Question

In: Mechanical Engineering

How to calculate density of mixture flowing through pipe, with 50% volume of one fluid and...

How to calculate density of mixture flowing through pipe, with 50% volume of one fluid and 50% volume of another fluid?
Then for the mixture if temperature, internal diameter and pressure gradient is given. 1.Calculate Reynolds number
2. Volumetric flow rate
3. Local velocity at a perpendicular distance of X from inner wall of pipe.

Solutions

Expert Solution


Related Solutions

If a solution with 50% one fluid 50% another flowing through a pipe, with a given...
If a solution with 50% one fluid 50% another flowing through a pipe, with a given temperature, and internal diameter of pipe and pressure gradient per metre. How would you confirm the flow is laminar ? Calculate the volumetric flow rate ? And calculate the local velocity of liquid at a given perpendicular distance from the inner wall of the pipe ?
An incompressible fluid is flowing through a vertical pipe with a constriction. The wide section is...
An incompressible fluid is flowing through a vertical pipe with a constriction. The wide section is 2.00 cm in diameter and is at the top of the pipe. The pressure of the fluid in the wide section at the top is 200 kPa. The velocity of the fluid in the wide section is 4.00 m/s. The narrow section is located 4.00 m below the wide section. What is the diameter of the narrow section for the pressure of the fluid...
An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is...
An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is laminar. What is the velocity at the inner wall of the pipe? How do you know? The pipe has diameter a. The velocity profile in the pipe is vz = b ­– c r2. Please express c in terms of a and b. (You are applying a boundary condition to solve this problem.) Where in the pipe is the velocity a maximum? Please express...
Consider a pipe (diameter of 50 mm) with air flowing through it. The inlet conditions are:...
Consider a pipe (diameter of 50 mm) with air flowing through it. The inlet conditions are: Mach 3; total pressure = 1000 kPa and 550 K. The friction coefficient (f) is 0.004. The exit Mach number decreases with the length of the pipe. Assume adiabatic, steady flow. Write a short Matlab code and plot the following, while the exit Mach number changes from 2.5 to 0.99 with increments of ?M=0.01. Find the length of the pipe that is going to...
Fluid X is flowing in a circular pipe with a constant velocity ν (m/s). The fluid...
Fluid X is flowing in a circular pipe with a constant velocity ν (m/s). The fluid is cooled by a jacket kept at constant temperature, Tj. Fluid velocity is plug shaped , in other words uniform at radial positions. Assume that temperature is uniform in radial positions because of turbulent flow conditions; ρ and Cp of the fluid are constants. The inlet temperature (at z=0) is constant and uniform at To (To>Tj). Assume that thermal conduction of heat along the...
A water is flowing through a circular varying diameter pipe. The water completely fills the pipe...
A water is flowing through a circular varying diameter pipe. The water completely fills the pipe at all its sections. 1- What is the water velocity of the water at the first section if you know that the diameter of the pipe at this section= 22 cm and the water is flowing at a rate of 2.5 m3/s? 2- What is the diameter of the pipe at the second section if you know that the water velocity at this section...
Crude oil of specific gravity (0.75) is flowing through a pipe. The pipe has a diameter...
Crude oil of specific gravity (0.75) is flowing through a pipe. The pipe has a diameter of 100 mm and 50 mm at the sections 1 and 2 respectively. The velocity of crude oil at the section 1 is 550 cm/s. The   section 1 is 3000 mm and section 2 is 2000 mm above the datum. If the pressure at the section 1 is 0.2 N/mm2, find the intensity of pressure at section 2?
Water is flowing down through the pipe shown in the drawing. Point A is at the...
Water is flowing down through the pipe shown in the drawing. Point A is at the higher elevation, while B and C are at the same elevation. The cross-sectional areas are the same at A and B. Rank the pressures at the three points, largest first. C has a larger diameter than the other two.
Is the value of Cd a function of the fluid which is flowing through the meter?...
Is the value of Cd a function of the fluid which is flowing through the meter? What other effect does Cd accommodate in the case of viscous fluids (in addition to viscous or friction losses)?
An incompressible liquid flows through a straight horizontal pipe. Friction of the fluid within the pipe...
An incompressible liquid flows through a straight horizontal pipe. Friction of the fluid within the pipe causes a small amount of heat to be transferred from the fluid; to compensate, flow work must be done on the fluid to move it through the system (so W(dot)fl is greater than zero. a) How are V(dot)in and V(dot)out related, where V(dot) is the volumetric flow rate of the liquid? (Remember, fluid is incompressible) b) How must the pressures of Pin and Pout...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT