Question
In: Mechanical Engineering
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, air is at 98 kPa, 30oC and 766 kJ/kg of heat is transferred to air during the constant-volume heat addition process. Determine (a) the pressure (p3) and temperature (T3) at the end of the heat addition process, (b) the net work output, (c) the thermal efficiency and (d) the mean effective pressure for the cycle. Use the IG model
Solutions
samet mamat answered 2 years agoRelated Solutions
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the
beginning of the compression process, air is at 95 kPa and 27°C,
and 900 kJ/kg of heat is transferred to air during the
constant-volume heat-addition process. Taking into account the
variation of specific heats with temperature, determine
(a) the pressure and temperature at the end of the
heat-addition process, (b) the net work output,
(c) the thermal efficiency, and (d) the mean
effective pressure for the cycle
An ideal Otto cycle has a compression ratio of 8.5 At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8.5 At the
beginning of the compression process, air is at 98 kPa and 27∘C, If
the Tmax cannot exceed 2300K and 3e-5 kg of. assuming constant
specific heats at ambient temperature, determine (a) the pressure
and temperature at the end of each process. (b) the net work
output, (c) the thermal efficiency, and (d) the mean effective
pressure for the cycle.
An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 8. At the
beginning of the compression process, air is at 95 kPa and 27°C,
and 730 kJ/kg of heat is transferred to air during the
constant-volume heat-addition process. Take into account the
variation of specific heats with temperature. The gas constant of
air is R = 0.287 kJ/kg·K.
Determine:
(a) the pressure and temperature at the end of the heat addition
process
(b) the net work output
(c) the thermal...
The compression ratio is 8 in an engine working with the ideal Otto cycle. The heat...
The compression ratio is 8 in an engine working with the ideal Otto cycle. The heat transfer to the engine takes place from a heat source at a temperature of 1000 ° C and the heat transfer from the engine to the outside takes place in the environment of 20 ° C and 100 kPa. At the start of the isentropic compression process, the temperature is 50 ⁰C and the pressure is 110 kPa. The temperature at the end of...
An ideal cold air-standard Otto cycle has a compression ratio of 9.2. At the end of...
An ideal cold air-standard Otto cycle has a compression ratio of
9.2. At the end of the expansion process, the pressure is 110 psi,
the temperature is 1020 °R and the specific volume is 3.435
ft3/lbm. The heat rejection from the cycle is 92 BTU/lbm of air.
Evaluate specific heat at 100 °F and calculate the following by
hand: What is the mean effective pressure (psi)? The correct answer
is 231.8 psi. Show every step and calculation with units
necessary.to...
The compression ratio is 10 in the air standard Otto cycle. Pressure at the beginning of...
The compression ratio is 10 in the air standard Otto cycle.
Pressure at the beginning of the compression stroke is 1XY kPa and
the temperature is 15 ºC. The heat transfer to the air for each
cycle is 18XY kJ / kg air. Draw the T-s and P-v diagrams. (x=9
y=8).
Note: Accept that specific temperatures do not change with temperature. Take k = 1.4 and Cp = 1.0031 kJ / kg-K.
a)
For question 1, we draw the temperature...
The compression ratio of an ideal air-powered Diesel cycle is 20. At the beginning of the...
The compression ratio of an ideal air-powered Diesel cycle is
20. At the beginning of the compression process, the pressure of
the air is 100 kPa, the temperature is 20 ° C, and the highest
temperature of the cycle is required not to exceed 2250 K. Show the
cycle in the P-v diagram. Accept specific temperatures constant at
room temperature.
k=1.4 CP=1.005 kJ/kgK CV=0.718 kJ/kgK R=0.287 kJ/kgK
a) Calculate the temperatures entering and leaving the cycle,
the thermal efficiency of...
An ideal Otto engine has a compression ratio of 10 and uses air as the working...
An ideal Otto engine has a compression ratio of 10 and uses air
as the working fluid. The state of air at the beginning of the
compression process is 100 kPa and 27 0C. The maximum
temperature in the cycle is 2100K. (R=0.287 for air) (using
variable specific heat)
Draw the P-v diagram of the Otto cycle
Determine the specific internal energies at the beginning and
the end of the compression,
Determine the specific internal energies before and after the...
An Otto cycle having a compression ratio of 7:1 uses air as the working fluid. Initially...
An Otto cycle having a compression ratio of 7:1 uses air as the
working fluid. Initially p1 = 95 kPa,
T1 = 17 C, and V1 = 0.0038 m
3
. During the heat addition process, 7.5 kJ of heat are
added.
Determine:
(a) the heat rejected Q4-1 = __________ kJ
(b) the net work of the cycle Wnet = ________________ kJ
(c) the cycle thermal efficiency η = ________ %
(d) the mean effective pressure. MEP = __________ kPa
At the beginning of compression of an ideal Diesel cycle the gas has a temperature and...
At the beginning of compression of an ideal Diesel cycle the gas
has a temperature and pressure of 400C and 90
kN/m2, respectively. The volume ratio of compression is
16:1. The maximum temperature of the cycle is 14000C.
Determine, for the cycle,
the pressure and temperature at each of the cycle process
change points,
[8]
the work done/kg gas,
[4]
the thermal efficiency,
[4]
the work ratio,
[3]
the mean effective pressure,...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- An investor is considering purchasing a Treasury bond with a 20 year maturity, an 8% coupon...
- Write a program that copies the contents of one file to a destination file. This program...
- how to conduct a marketing mix for 3d crest white strips
- Is big data analytics used for service innovation at Amazon? If so, please write a brief...
- A shrink-fit process has been used to enhance the pressure carrying capacity of a cylinder. During...
- Ten-year zero coupon bonds issued by the U.S. Treasury have a face value of $1,000 and...
- The Blossom Department of Transportation has issued 25-year bonds that make semiannual coupon payments at a...
ADVERTISEMENT