The earthquakes from transform plate boundaries are;
1, shallow and weak
2, intermediate depth and intermediate strength
3, deep and strong
In: Other
Describe the difference between gasohol, E-85 and B-20. On what type of devices can they be used , In what states are they use, What requirements must be met for their use.
In: Other
In: Other
a. The bubble point temperature of a liquid mixture with a molar composition of 35.0 mol% n-hexane and 65.0 mol% n-heptane at 1.00 atm and the composition (mole fractions) of the vapor in equilibrium with this mixture.
Find bubble point
Find x Hexane
Find x Heptane
b. The dew-point temperature of a gas mixture with a molar composition of 30.0% n-hexane, 15.0% n-heptane, and 55.0% air at 1.00 atm and the composition (mole fractions) of the liquid in equilibrium with this mixture.
Find dew point
Find x Hexane
Find x Heptane
In: Other
In: Other
I need in-length solutions to part A and B
A. Contrast the classification systems that are used in the International Union for the Conservation of Nature’s Red List, Canada’s Species At Risk Act (SARA), and the Manitoba Endangered Species and Ecosystems Act (MESEA). How do these support biodiversity conservation?
B. Describe how the peregrine falcon and polar bear are classified by each of the agencies in question 2. Why might there be differences in classification and how does this in itself benefit species conservation?
In: Other
A gas mixture consisting of 10% ethylene gas (C2H4) and 90% CO2 by mol is combusted with 50% excess air via the following unbalanced reaction: C2H4 (g) + O2 (g) à CO2 (g) + H2O (g) Air for the reaction is brought in from outdoors and cooled through a chiller to remove any humidity. The combustion product gas is pressurized so that all water vapor is condensed into liquid, which then combines with the water from the air chiller and exits through a separate H2O stream. a) Draw the process flow diagram. b) If the outdoor air has a dry bulb temperature of 30°C and 30% relative humidity (RH), how many mol of water leave the system (in the combined H2O exit stream) per mol of ethylene combusted? c) What is the molar volume (in L/mol) of the water-free combustion gas if it is pressurized to 150 atm at 20°C? CO2: Tc = 31.2°C, Pc = 72.8atm O2: Tc = -118.6°C, Pc = 49.8atm N2: Tc = -147°C, Pc = 33.5atm
In: Other
Chloroform has a vapor pressure of 197 mmHg at 73.4 F,
and 0.5895 atm at 45.0 °C. Estimate its heat of vaporization and
normal boiling point.
In: Other
One of the major concerns related to climate change is sea level rise. The Intergovernmental Panel on Climate Change (IPCC) has estimated that we are likely going to see sea level rise of around three feet by 2100. However, these estimates have come under heavy criticism in recent years as being far too conservative. Why are the IPCC estimates so conservative (i.e. what information does the IPCC not include in its models or estimates of sea level rise)? According to the VICE documentary piece that profiles Dr. Eric Rignot, how much would global sea levels rise if the West Antarctic Ice Sheet were to melt? (5%) How is Eric Rignot and his research team able to use radar and lasers to determine the thickness and melt rates of West Antarctic ice shelves?
Answer all the questions please. Thank you
In: Other
Describe the principles and operations of four types of concentrating solar power (CSP) technologies using a systems diagram and discuss any potential environmental implications of concentrating solar power systems. Please include appropriate references to support your argument?
In: Other
3. Most current light water reactors use some form of a _______________________ refueling pattern. This method is chosen because it combines the advantages of the ____________ and ___________ refueling patterns.
In: Other
How did the art of early-twentieth-century artist
Marcel Duchamp influence contemporary Conceptual
art?
Compare Duchamp’s Bicycle Wheel or Fountain to the
work of Hans Kosuth in One and Three Chairs.
What comparisons that can be made between Dada and Conceptual art?
In: Other
4. [30 pts] 20 liters of water at 20 bar and 100 °C are in a
variable volume container. 56,000 kJ of
heat are added to the system at constant pressure which causes an
increase in both temperature
and volume.
a. [4 pts] Draw a schematic of the process
b. [4 pts] Write the energy balance for this process and clearly state any assumptions:
c. [12 pts] What is the final volume of the container?
d. [8 pts] How much work in [kJ] is completed? Pay careful attention to your negative signs!
e. [2 pts] In one sentence explain your answer from Part D in
the context of the process described in
the problem statement and the heat that is added to the system.
In: Other
Explain the principles of feedforward and cascade adjustments. What
properties are important? When are the different forms appropriate?
What are the benefits of using them?
In: Other
In: Other