The rod shown below is made of two materials. The figure is not drawn to scale....

The rod shown below is made of two materials. The figure is not drawn to scale. Each conductor has a square cross section 10.00 mm on a side. The first material has a resistivity of 4.00×10-8Ω∙m and is 50.0 cm long, while the second material has a resistivity of 6.00×10-8 Ω · m and is 80.0 cm long. If a potential difference of 100V is applied between the front and the back faces, determine the following physical quantities:

total amount of charge that would pass through the rod in 1minute.
The current density passing through each section.
The electric field inside the rod
Determine the drift speed of the charges through each side if the left and the right sides carry 4×1028 and 8×1028 free electrons per cubic meter.

Expert Solution

genius_generous answered 2 years ago

Voltage, Current, Resistance The rod shown below is made of two materials. The figure is not...

Voltage, Current, Resistance The rod shown below is made of two materials. The figure is not drawn to scale. Each conductor has a square cross section 10.00 mm on a side. The first material has a resistivity of 4.00×10-8Ω∙m and is 50.0 cm long, while the second material has a resistivity of 6.00×10-8 Ω · m and is 80.0 cm long. If a potential difference of 100V is applied between the front and the back faces, determine the following physical...

Two balls connected by a rod, as shown in the figure below (Ignore rod’s mass).

Two balls connected by a rod, as shown in the figure below (Ignore rod’s mass). Mass of ball X is 8kg and the mass of ball Y is 5 kg What is the moment of inertia of the system about AB?

Two balls connected by a rod as shown in the figure below (Ignore rod’s mass). What is the moment of inertia of the system?

Two balls connected by a rod as shown in the figure below (Ignore rod’s mass). What is the moment of inertia of the system? Given : mX = 400 grams = 0.4kg mY = 500 grams = 0.5 kg rX = 0cm = 0m rY = 30cm = 0.3m

A 3 kg collar slides with frictionless along a vertical rod is shown in below Figure....

A 3 kg collar slides with frictionless along a vertical rod is shown in below Figure. The spring is under-formed when the collar A is at the same elevation as point O. The collar is released from rest at y1 = 0.4 m. Determine the velocities of the collar as it first passes a) y2 = 0.0 m, and b) y3 = − 0.4m

Two concentric spheres are shown in the figure below.

Two concentric spheres are shown in the figure below. The inner sphere is a solid conductor and carries a charge of +5.00 μC uniformly distributed over its outer surface. The outer sphere is a conducting shell that carries a net charge of -8.00 μC. No other charges are present. The radii shown in the figure have the values R1 = 10.0cm, R2 = 20.0cm, and R3 = 30.0 cm. (a) (10 points) Find the total excess charge on the inner and...

Two identical uniform solid spheres are attached by a solid uniform thin rod, as shown in the figure.

Two identical uniform solid spheres are attached by a solid uniform thin rod, as shown in the figure. The rod lies on a line connecting the centers of mass of the two spheres. The axes A, B, C, and D are in the plane of the page (which also contains the centers of mass of the spheres and the rod), while axes E and F (represented by black dots) are perpendicular to the page. (Figure 1).Rank the moments of inertia...

the two halves of the rod in the figure are uniformly charged to ±q. (figure 1)

The two halves of the rod in the figure are uniformly charged to plus/minus Q as shown. What is the electric potential at the point indicated by the dot?

A branching pipe connects two storage tanks as shown in Figure Q3 below. Figure Q3 (a)...

A branching pipe connects two storage tanks as shown in Figure Q3 below. Figure Q3 (a) Write down the continuity equation as it applies to flows in the pipes 1, 2 and 3. [1 mark] (b) Write down the energy equation in terms of energy heads at A and at B and quantities relating to flow in the pipes in between. [2 marks] (c) What can be said about the energy loss in pipe 2 relative to that in pipe...

As shown in the figure, a conducting rod with a linear mass density of 0.0395 kg/m...

As shown in the figure, a conducting rod with a linear mass density of 0.0395 kg/m is suspended by two flexible wires of negligible mass in a uniform magnetic field directed into the page. A power supply is used to send a current through the rod such that the tension in the support wires is zero. (a) If the magnitude of the magnetic field is 3.70 T, determine the current in the conducting rod. (b) Determine the direction of the...

Given the two charged particles shown in the figure below, find the electric field at the...

Given the two charged particles shown in the figure below, find the electric field at the origin. (Let q1 = −26.00 nC and q2 = 7.00 nC. Express your answer in vector form.) q1 is at (2,4) and q2 is at (-2,3)

Question