Question

In: Math

2. A pharmacy is using X bar and R charts to record the time it takes...

2. A pharmacy is using X bar and R charts to record the time it takes to fill a prescription after the customer has turned in or called in the prescription. Each day, the pharmacy records the times it takes to fill six prescriptions. During a 30-day period, the hospital obtained the following values: X double bar = 20 minutes; R bar = 4 minutes. The upper and lower specifications are 23 minutes and 13 minutes respectively. What is the value of Cp, to two decimal places?

Solutions

Expert Solution


Related Solutions

1. A pharmacy is using X bar and R charts to record the time it takes...
1. A pharmacy is using X bar and R charts to record the time it takes to fill a prescription after the customer has turned in or called in the prescription. Each day, the pharmacy records the times it takes to fill six prescriptions. During a 30-day period, the hospital obtained the following values: X double bar = 20 minutes; R bar = 4 minutes. The upper and lower specifications are 23 minutes and 13 minutes respectively. What is the...
Discuss the purposes and differences between the C- charts, p-charts and X-bar and R charts. 2....
Discuss the purposes and differences between the C- charts, p-charts and X-bar and R charts. 2. Define Cp and Cpk 3. The capability index allows for some drifting of the process mean. Discuss what this means in terms of product quality output.
A large bank established X-Bar and R charts for the time required to process applications for...
A large bank established X-Bar and R charts for the time required to process applications for its charge cards. A sample of five applications is taken each day. The first four weeks (20 days) of data give: X bar bar = 16 min s bar = 3 min R bar = 7 min Based on the values given, calculate the centerline and control limits for the X bar and R charts.
Use the data in the table below to set up short-run X-bar and R charts using...
Use the data in the table below to set up short-run X-bar and R charts using the DNOM approach. The nominal dimensions for each part are TA = 50, TB = 75, TC = 60, TD = 100, and TE = 125. Sample Part M1 M2 M3 1 A 51 50 51 2 A 48 50 52 3 A 50 52 48 4 A 49 51 54 5 A 47 45 52 6 A 49 50 51 7 B 73...
1. Why are X-bar and R-Charts used together? Please Explain. 2. The principal focuses and methods...
1. Why are X-bar and R-Charts used together? Please Explain. 2. The principal focuses and methods of the pioneers of scientific management, what are they?(as represented by Henry Gantt, Frederick Taylor, Frank Gilbreth,etc.). In your words, how is the modern total quality management method different from the above?
x bar and R control Charts A quality control inspector at the Company B has taken...
x bar and R control Charts A quality control inspector at the Company B has taken twenty-five samples with four observations each of the sample weight (g). The data are shown in the table. Construct x bar and R control charts for these data. Identify any out-of- control points. Assume these points (if any) are assignable. Remove them and recalculate the control limits. Construct the revised x bar and R control charts. Submit data (spreadsheet) and charts. Comment on the...
Use the attached file to make the appropriate x-bar and R charts. You must include the...
Use the attached file to make the appropriate x-bar and R charts. You must include the data points, center line, upper and lower control limits. (Remember, only the data points should NOT be a straight line.) MEAN CI x-bar (Grand Mean) LCL x-bar (CI-A2*R-bar) UCL x-bar (CI+A2*R-bar) Sample Range (Max-Min) R-bar (Mean) UCL R (R-bar*D4) 1 12.00 12.50 12.47 12.78 13.00 2 12.78 11.18 11.92 11.95 11.86 3 13.30 13.00 12.95 12.98 13.32 4 11.29 12.87 12.53 11.42 12.37 5...
MEAN CI x-bar (Grand Mean) LCL x-bar (CI-A2*R-bar) UCL x-bar (CI+A2*R-bar) Sample Range (Max-Min) R-bar (Mean)...
MEAN CI x-bar (Grand Mean) LCL x-bar (CI-A2*R-bar) UCL x-bar (CI+A2*R-bar) Sample Range (Max-Min) R-bar (Mean) UCL R (R-bar*D4) 1 68.51 68.46 68.54 68.34 68.46 68.46 2 68.94 68.2 68.54 68.56 68.7 68.7 3 68.66 68.44 68.55 68.77 68.7 68.64 4 68.49 68.94 68.56 68.62 68.69 68.56 5 68.64 68.63 68.62 68.32 68.34 68.24 6 68.34 68.42 68.99 68.02 68.03 68.47 7 68.99 68.94 68.95 68.95 68.94 68.97 8 68.92 68.91 68.97 68.93 68.96 68.95 GRAND MEAN n= A2= D4=
A tomato farmer has been using an X-bar and R chart to control the yield per...
A tomato farmer has been using an X-bar and R chart to control the yield per plant on her highly-mechanized farm. The yield is table over time in both variability and location. The X-bar chart has a centerline value of 10.50 pounds and the upper control limit is 14.20 pounds. Find the value of the lower control limit of the X-bar chart? Find the value of the upper and lower one-sigma and two-sigma zones of the X-bar chart? Find the...
Using the data shown, you will create two charts. The first chart is a bar chart...
Using the data shown, you will create two charts. The first chart is a bar chart that will display % growth in different job titles between 2010 and 2020Est. The second chart will be a pie chart showing the 2020Est. Jobs in different categories as a % of overall 2020Est. jobs. Computer-Related Jobs 2010 2020 Est. % Change Systems Analysts         544,400         664,800 Software App Developers         520,800         664,500 Programmers         363,100         406,800 Network/System Admins         347,200...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT