For the the given transfer function G(s) = s2/(s4+7s3+17s2+17s+6)determine (a) the initial and final values using...

For the the given transfer function G(s) = s2/(s4+7s3+17s2+17s+6)determine

(a) the initial and final values using IVT & FVT,

b) its characteristics (order, pole, zero, order of numerator and denominator, causality, steady state gain), and

(c) the corresponding time domain function

Expert Solution

Amanda K answered 2 years ago

A system has the transfer function H(s)=3(s2+7 s)/(s2+8s+4). Draw a Bode plot of the transfer function...

A system has the transfer function H(s)=3(s2+7 s)/(s2+8s+4). Draw a Bode plot of the transfer function and classify it as lowpass, highpass, bandpass, or bandstop. Draw the Direct Form II for this system.

given the transfer function G(s) = (1.151 s + 0.1774)/(s^3 + 0.739 s^2 + 0.921 s),...

given the transfer function G(s) = (1.151 s + 0.1774)/(s^3 + 0.739 s^2 + 0.921 s), write the state equations x'= Ax + Bu + Dw , and y = Cx for the system .

Let S = {s1, s2, s3, s4, s5, s6} be the sample space associated with an...

Let S = {s1, s2, s3, s4, s5, s6} be the sample space associated with an experiment having the probability distribution shown in the accompanying table. If A = {s1, s2} and B = {s1, s5, s6}, find the following. Outcome Probability s1 1 3 s2 1 7 s3 1 6 s4 1 6 s5 1 21 s6 1 7 (a) P(A) = P(B) = (b) P(AC) = P(BC) = (c) P(A ∩ B) = (d) P(A ∪ B) =...

Consider the linear time invariant system described by the transfer function G(s) given below. Find the...

Consider the linear time invariant system described by the transfer function G(s) given below. Find the steady-state response of this system for two cases: G(s) = X(s)/F(s) = (s+2)/(3(s^2)+6s+24) when the input is f(t) = 5sin(2t) and f(t) = 5sin(2t) + 3sin(2sqrt(3)t)

Consider a system with the following transfer function, G(s) = 10/ [s(s + 1)]. Design a...

Consider a system with the following transfer function, G(s) = 10/ [s(s + 1)]. Design a compensator according to the following design objectives: • Kv = 20 sec−1 ; • PM = 50 oF; • GM ≥ 10 dB. Submit your answer regarding the detailed compensator design procedures, and the corresponding MATLAB code and figures to verify your design. In addition, compare the step response of both uncompensated and compensated systems in MATLAB

A Unity feedback system has an open loop transfer function of G(s) = K / s...

A Unity feedback system has an open loop transfer function of G(s) = K / s (s+1) (s+5) Draw the root locus plot and determine the value of K to give a damping ratio of 0.3 A network having a transfer function of 10(1 +10s) /(1 +100s) is now introduced in tandem. Find the new value of K, which gives the same damping ratio for the closed -loop response. Compare the velocity error constant and settling time of the original...

1. Determine the ROC for stability for transfer function H(s) = 1 / (s-2) ( s-1)...

1. Determine the ROC for stability for transfer function H(s) = 1 / (s-2) ( s-1) 2. Determine the ROC for stability for transfer function H(z) = (z-1) / (z+0.1) (z-0.2)

For the system with transfer function H(s)=1/(s-2)(s-1) determine the ROC for stability.

A servomechanism has an open loop transfer function of G(s) = 10 / s (1+0.5s) (1+0.1s)...

A servomechanism has an open loop transfer function of G(s) = 10 / s (1+0.5s) (1+0.1s) Draw the Bode plot and determine the phase and gain margin. A networks having the transfer function (1+0.23s)/(1+0.023s) is now introduced in tandem. Determine the new gain and phase margins. Comment upon the improvement in system response caused by the network

KHP mass measurements Titration of KHP with NaOH Initial (g) Final (g) Total (g) Initial NaOH...

KHP mass measurements Titration of KHP with NaOH Initial (g) Final (g) Total (g) Initial NaOH vol. (mL) Final NaOH vol. (mL) Total NaOH sol’n (mL) NaOH molarity (molarity) 73.9473 74.1675 0.2202 1.69 22.32 20.63 0.0523 97.6215 97.8296 0.2081 3.76 23.32 19.56 0.0521 95.8243 96.0261 0.2018 1.23 20.62 19.39 0.0510 From the sample volume and distances to the first and second equivalence points, calculate the molarities of hydrochloric and phosphoric acids in the sample. GIve uncertainties for the calculated molarities....

Question