In an apartment building, water is traveling up inside a pipe that has a constant cross-sectional...

In an apartment building, water is traveling up inside a pipe that has a constant cross-sectional area.

(A.) Which of the following statements about this situation are true? Choose the two correct statements.

As the water rises¸ it slows down

As the water rises¸ its speed stays the same

As the water rises¸ the pressure drops

As the water rises¸ the pressure stays the same

(B.) The flow from a 2 cm diameter shower head pipe is 5 liters per minute. What is the speed of the water exiting the pipe? _______ m/s

(C.) The shower head above is in a fourth floor apartment, 15 meters above the main pipe in the building basement. The main pipe in the basement is 10 cm in diameter. What must the water speed be in the main pipe? ______ m/s

(D.) A fourth floor apartment is 15 meters above the main pipe in the building basement. The flow from a 2 cm diameter shower head pipe is 5 liters per minute. The main pipe in the basement is 10 cm in diameter. What must the pressure (in kPa) in the main pipe in the basement be in order to generate that flow on the fourth floor? Take g to be 9.8 N/kg and atmospheric pressure to be 101.3 kPa.
_______ kPa

Expert Solution

genius_generous answered 7 months ago

Water is moving with a speed of 11.3 m/s through a pipe with a cross-sectional area...

Water is moving with a speed of 11.3 m/s through a pipe with a cross-sectional area of 4.5 cm2. The water gradually descends 30.0 m as the pipe's cross section increases by a factor of three. What is the speed of flow at the lower level? Tries 0/16 How much higher is the pressure at the lower level compared to the upper level?

A fluid travels through a pipe of cross-sectional area A1 then moves through a connection into...

A fluid travels through a pipe of cross-sectional area A1 then moves through a connection into another pipe of cross-sectional area A2. If A1 is larger than A2, the velocity of the fluid will ______. Group of answer choices A. increase B. decrease C. remain constant D. evaporate

A cylinder of height 10 cm and cross sectional area of 1 cm2 is submerged inside...

A cylinder of height 10 cm and cross sectional area of 1 cm2 is submerged inside two immiscible liquids of specific gravity 1.1 and 1.0 respectively. The cylinder is in equilibrium in such a way that 5 cm of its height is submerged in the bottom liquid and 2 cm above the surface of the two liquids. In order the cylinder to be completely submerged inside the two liquids find the value of the mass of an object that needs...

1. If you know the measured electrical voltage and the cross-sectional area of the pipe/tube you...

1. If you know the measured electrical voltage and the cross-sectional area of the pipe/tube you can determine the volume? T/F 2. In order to use the electromagnetic type of meter what kind of fluid must be flowing through the meter in order to induce an electrical voltage between the electrodes? T/F 3. By increasing the cross-sectional area of the restriction, one can significantly increase the flow velocity. T/F 4. The higher the flow velocity and the resulting pressure drop...

If the cross-sectional area of the manometer is 10 cm2 and the amount of water added...

If the cross-sectional area of the manometer is 10 cm2 and the amount of water added is 50 ml, what will be the height difference between the two arms of the manometer?

a- Water enters a house through a pipe with inside diameter of 3.0 cm at an...

a- Water enters a house through a pipe with inside diameter of 3.0 cm at an absolute pressure of 5.0 X 105 Pa. A 1.5 cm diameter pipe leads to the second-floor bathroom 6.0 m above. When the flow speed at the inlet pipe is 2.0 m/s find: - Flow speed (velocity) of the water in the bathroom - Pressure water in the bathroom? - Calculate the volume flow rate in the bathroom.

The composite walls of a building are made up of three materials. The inside layer of...

The composite walls of a building are made up of three materials. The inside layer of the walls is 1-cm thick wall board (kwb = 0.2 W/mK). The middle layer is 10 cm thick insulation (kI = 0.06 W/mK) and the outside layer is 3 cm of wood (kw = 0.15 W/mK). The total wall area is 350 m2. The outside air temperature is -10 oC and the inside air temperature is maintained at 20 oC. The inside and outside...

The flowrate for water traveling through a horizontal 300 m-long cast iron pipe with a diameter...

The flowrate for water traveling through a horizontal 300 m-long cast iron pipe with a diameter of 0.6 m and a pressure drop of 17.2 kPa is to be found. P.S. use iterative approach to find values of f and then V using that f.

Cold water inside / outside diameter in the same axis two pipe heat exchanger used as...

Cold water inside / outside diameter in the same axis two pipe heat exchanger used as engine oil cooler It enters the 25/30 mm steel pipe at a temperature of 15 degrees at a speed of 0.5 m / s, Take off at a temperature of 25 degrees.Hot oil, on the inside / outside diameter of 40/46 mm steel pipe, at a temperature of 60 degrees with a speed of 0.25 m / s. enters.it is desired to cool the...

A cast iron water pipe of 500 mm inside diameter and 20 mm thick, is supported...

A cast iron water pipe of 500 mm inside diameter and 20 mm thick, is supported over a span of 10 meters. Find the maximum bending stress in the pipe metal, when the pipe is running full. Take density of cast iron = 70.6 kN/m3 and water = 9.8 kN/m3

Question