2) A circular sewer is to carry a flow rate of 0.07m3 /s when flowing full....

2) A circular sewer is to carry a flow rate of 0.07m3
/s when flowing full. The sewer is
to be laid on a slope of 0.006. With n = 0.013, calculate the pipe size and velocity
of flow. Compare the nomogram and theoretical values.

Expert Solution

Ally Wells answered 10 months ago

Determine the velocity of the flow in a sewer running full. The sewer is laid at...

Determine the velocity of the flow in a sewer running full. The sewer is laid at 1 in 500. The diameter of sewer is 200 cm. Also determine the discharge flowing through the sewer. What will be the effect if slope is doubled? Assume N = 0.014 in Manning’s formula.

An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is...

An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is laminar. What is the velocity at the inner wall of the pipe? How do you know? The pipe has diameter a. The velocity profile in the pipe is vz = b – c r2. Please express c in terms of a and b. (You are applying a boundary condition to solve this problem.) Where in the pipe is the velocity a maximum? Please express...

A lined canal (n = 0.016) is designed to carry a flow rate of 33 m3/s....

A lined canal (n = 0.016) is designed to carry a flow rate of 33 m3/s. The canal is laid at a slope of 14 cm/km with a side slope of 2:1. Design the canal cross section (the water depth and bed width) according to each of the following scenario: If Velocity is 1.0 m/s If the Most efficient hydraulic section (i.e., when Rh=y/2) If Width/depth =5 Comment on the practicality of the designs (Height of side slope, flow velocity,...

Fluid X is flowing in a circular pipe with a constant velocity ν (m/s). The fluid...

Fluid X is flowing in a circular pipe with a constant velocity ν (m/s). The fluid is cooled by a jacket kept at constant temperature, Tj. Fluid velocity is plug shaped , in other words uniform at radial positions. Assume that temperature is uniform in radial positions because of turbulent flow conditions; ρ and Cp of the fluid are constants. The inlet temperature (at z=0) is constant and uniform at To (To>Tj). Assume that thermal conduction of heat along the...

a. What is the rate of flow in mL/s when the volume in the cylinder is...

a. What is the rate of flow in mL/s when the volume in the cylinder is 1500mL? b. Using the following data, estimate how long it would take for the tank to empty from 2500mL to 2000mL. c. Is the amount of time longer that it takes to empty from 2000mL to 1500mL? Please explain and show working out. Time (s) Volume (mL) 0 2000 4.3 1900 9.5 1800 13.7 1700 18.5 1600 23.2 1500 28.2 1400 34.7 1300 40.4...

2. The circular-flow model The following diagram presents a circular-flow model of a simple economy. The...

2. The circular-flow model The following diagram presents a circular-flow model of a simple economy. The outer set of arrows (shown in green) shows the flow of dollars, and the inner set of arrows (shown in red) shows the corresponding flow of inputs and outputs. Based on this model, households earn income when purchase in factor markets. Suppose Frances earns $700 per week working as a corporate attorney for Rowan and Martin Associates. She uses $9 to order a...

In the process of methanol production, a gas stream flowing at a molar flow rate of...

In the process of methanol production, a gas stream flowing at a molar flow rate of 100 mol / min containing 32 mol% CO, 64 mol% Hz. and 4 mol% of N2 is led to the reactor. The product from the reactor is condensed where liquid methanol is separated. Unreacted gases are recycled in a ratio of 5: 1 mol of recycle to moles of fresh feed. Parts of the recycled gases are purged. The reaction equation is CO +...

Air at 1 atm flowing at a rate of 0.1 kg / s has to be...

Air at 1 atm flowing at a rate of 0.1 kg / s has to be cooled from 400 to 300K in a tube of 10 cm in diameter with a uniform wall temperature of 250 K. Determine the length of the tube.

A mass flow rate of 2 kg/s of steam is expanded in an adiabatic turbine with...

A mass flow rate of 2 kg/s of steam is expanded in an adiabatic turbine with an isentropic efficiency of 0.92. The steam enters at 3 MPa and 400 C and leaves at 30 kPa. Determine how much power the turbine is producing. Express your result in kW. (Sol: 1649 kW)

A stream of pure cyclopentane vapor flowing at a rate of 1550 L/s at 150 ºC...

A stream of pure cyclopentane vapor flowing at a rate of 1550 L/s at 150 ºC and 1 atm of pressure enters a cooler, which is operating at 1 atm. The cooler functions as a flash separator (one liquid outlet stream, one vapor outlet stream) with 75% of the feed being condensed and exiting the cooler at 1 atm. The liquid stream exiting the cooler is in equilibrium with the exiting vapor. Use a molar flow and enthalpy summary table to help organize...

Question