Determine the velocity of the flow in a sewer running full. The sewer is laid at...

Determine the velocity of the flow in a sewer running full. The sewer is laid at 1 in 500. The diameter of sewer is 200 cm. Also determine the discharge flowing through the sewer. What will be the effect if slope is doubled? Assume N = 0.014 in Manning’s formula.

Solutions

Expert Solution

Ally Wells answered 1 month ago

Next > < Previous

Related Solutions

2) A circular sewer is to carry a flow rate of 0.07m3 /s when flowing full....

2) A circular sewer is to carry a flow rate of 0.07m3 /s when flowing full. The sewer is to be laid on a slope of 0.006. With n = 0.013, calculate the pipe size and velocity of flow. Compare the nomogram and theoretical values.

a) Use Manning’s to determine the velocity of flow and the capacity of the following pipes:...

a) Use Manning’s to determine the velocity of flow and the capacity of the following pipes: 300mm PVC main installed at a slope of 3% 375mm PVC main installed at a slope of 3% 450mm PVC main installed at a slope of 3% b) Comment on the percent increase in capacity when changing pipe to a larger size in the previous question. (You will have an answer for 300mm to 375mm and an answer for 375mm to 450mm. Your answer...

Flow in Sewers What are the minimum and maximum flowrates for sanitary and storm sewer? What...

Flow in Sewers What are the minimum and maximum flowrates for sanitary and storm sewer? What is the reason (rationale) for applying such minimum and maximum for each sewer type? Present answer in Tabulation

Determine the entrance conditions at the hub of an axial flow stator-rotor compressor. The mean-velocity diagram...

Determine the entrance conditions at the hub of an axial flow stator-rotor compressor. The mean-velocity diagram has a flow coefficient of 0.3 and work coefficient of 0.446. The exit flow is at axial direction. The hub diameter is 0.75 of the mean diameter. The axial flow velocity has a relationship

Velocity potential function in the velocity field is given asØ=1axyt:a-Is the flow compressible ?(3p)b-Show the flow...

Velocity potential function in the velocity field is given asØ=1axyt:a-Is the flow compressible ?(3p)b-Show the flow is steady ornot?(3p)c-In this flow field, find the resultant velocity and acceleration and their components at point A(8,8) at time t=1.(5p)d-Find the stream function for this flow.(7p)e-If the particle passing through the point (x0, y0)=(8, 8) is marked at time t=0, determine the location of the particle at time t=4s.(7p)

Poiseuille flow describes laminar flow in a circular pipe. The velocity distribution in such flow has...

Poiseuille flow describes laminar flow in a circular pipe. The velocity distribution in such flow has a parabolic form. Prove that the mean velocity is equal to one-half of the maximum velocity in this type of flow. Be sure to show all of your work. (Hint: the analysis is similar to that done for laminar flow between parallel plates)

Derive velocity distribution, maximum velocity, average velocity, and force in z-direction for the following flow conditions,...

Derive velocity distribution, maximum velocity, average velocity, and force in z-direction for the following flow conditions, and state your assumptions Flow of Newtonian fluid in the form of film over flat plate due to gravity, if kept vertical. Flow of Newtonian fluid in the form of film over flat plate due to pressure force, if kept horizontal Flow of non-Newtonian fluid in the form of film over flat plate due to gravity, if kept vertical. Flow of non-Newtonian fluid in...

You are 50m away from a train and running at a constant velocity of 26m/s. The...

You are 50m away from a train and running at a constant velocity of 26m/s. The train has a constant acceleration of 39m/s2. If it takes the train 4.92 seconds to reach a distance of 150m, and it takes you 5.78 seconds to reach a distance of 150m, then at what distance will the two meet? Please show what equations to use, THEN input the values. Thanks! Please let me know if there are any missing variables you need. I'm...

Compared to normal blood flow velocity, v0, what is the velocity of blood as it passes through this blockage?

Arteriosclerotic plaques forming on the inner walls of arteries can decrease the effective cross-sectional area of an artery. Even small changes in the effective area of an artery can lead to very large changes in the blood pressure in the artery and possibly to the collapse of the blood vessel. Imagine a healthy artery, with blood flow velocity of v0=0.14m/s and mass per unit volume of ρ=1050kg/m3. The kinetic energy per unit volume of blood is given by K0=12ρv20. Imagine that plaque...

1) Distinguish between blood flow rate and blood flow velocity. When an expert in the field...

1) Distinguish between blood flow rate and blood flow velocity. When an expert in the field uses the term blood flow, does that term usually mean rate or velocity? 2) Explain why a heart can keep beating after it has been removed from a living body.

Subjects