Question

In: Advanced Math

Select a 12 ft cantilever beam with p = 0.012, to support a dead load of...

Select a 12 ft cantilever beam with p = 0.012, to support a dead load of 2k/f (including self weight) and Live load of 3 k/ft. fy= 60000 psi, fc'= 3500 psi (hint your answer should be Width = XXXX, Effective depth= XXXXX, Area of reinforcement = XXXXX)

Solutions

Expert Solution

I HOPE THIS ANSWER WILL BE HELPFUL TO YOU

PLEASE LIKE THIS ANSWER

THANK YOU.

Colby Messinger answered 1 year ago
Next > < Previous

Related Solutions

Design a 9 ft cantilever if a dead load 1 k / ft ( not including...
Design a 9 ft cantilever if a dead load 1 k / ft ( not including the beam weight ) and live load of 1 k / ft . use fc ' = 3800 psi and fy = 60,000 psi . ( Hint : Rectangular section , answer should be in In " 2 for Area of steel and in inches for width and height )
Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of...
Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of 1 kip/ft, a uniformly distributed live load of 1 kip/ft, and a concentrated dead load of 8.4 kips a distance of 5 ft from one support Show all the steps. (LRFD) Fy = 50k/in2    E = 29,000k/in2
The service load bending moments on a beam are 128 kip-ft for dead load and 107...
The service load bending moments on a beam are 128 kip-ft for dead load and 107 kip-ft for live load. The beam is 12 in. wide, f’c is 3000 psi and fy is 60 ksi. Determine Mu, Mt, p, R, the depth of the beam and the As of tensile reinforcing required. How many no. 8 bars or No. 10 bars would have the required As?
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft...
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft plus the beam self-weight and a uniform live load of 3.3 kips/ft. The lateral supports are located at the supports and at the midpoint of the span. Determine the leastweight W-shape to carry the load. Use A992 steel and Cb= 1.0. Design by (a) LRFD and (b) ASD. [6.16-36]
A cantilever bean is 12 feet long and has a uniformly distributed dead load of 600...
A cantilever bean is 12 feet long and has a uniformly distributed dead load of 600 lbs/ft and a uniformly distributed live load of 1000 lbs/ft. Design the beam for flexure assuming it is continuously braces by a floor/deck system. Use 36 ksi steel. a) draw Free body Diagram/ shear + moment diagram to find Mu Max b) Solve for Zx based on Mu Max c) Select beam from table 9.1 d) Check compactness criteria e) if compactness works, recalculate...
Q3 (a) Figure Q3 (a) shows a cantilever beam which is carry a load P at...
Q3 (a) Figure Q3 (a) shows a cantilever beam which is carry a load P at point C. (i) Sketch the deflection curve of the beam. (ii) Derive the bending moment deflection, slope deflection and deflection equation at b-b using Double Integration Method. (iii) Calculate the maximum deflection. Given: L= 10 m, a= 3m, P= 25 kN. EI is constant (b) Figure Q3 (b) shows a solid steel spindle AB that has a diameter ??=38 mm. The allowable shearing stress...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft plus self weight and service live load of 2.0 k/ft, with a 30 -ft simple span. Material strength will be fy = 60 ksi and fc = 5 ksi for steel and normal weight concrete respectively. Start the design of the beam dimensions using the rules of thumbs in class. The total beam depth, h, must not exceed twice the width. Calculate the required...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft plus self weight and service live load of 2.0 k/ft, with a 30 -ft simple span. Material strength will be fy = 60 ksi and fc = 5 ksi for steel and normal weight oncrete respectively. Startthe design of the beam dimensions using the rules of thumbs in class. The total beam depth, h, must not exceed twice the width. Calculate the required beam...
(1) Select the lightest, rectangular Douglas fir section for the cantilever beam of15- ft span that...
(1) Select the lightest, rectangular Douglas fir section for the cantilever beam of15- ft span that will carry a uniform load of 450 lb/ft. [Hint: V max = wL; Mmax = wL2/2]
A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including...
A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including the beam self-weight and live load of 0.8kip/ft. Determine the minimum required plastic section modulus and select the lightest-weight W-shape to carry the moment. Assume full lateral support and A992 steel. Design by (a) LRFD and (b) ASD
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT