The rectangular hollow section in this welded assembly has a height of h=73mm, a width of...

The rectangular hollow section in this welded assembly has a height of h=73mm, a width of w=48mm and a length L=592mm. For the weld in this assembly, calculate either the Unit second polar moment of Area or the Unit Second Moment of Area, whichever is required to determine the secondary shear stress for this weld loading condition. Provide your answer in m³.

Solutions

Expert Solution

Here in this case polar moment of are is used to calculate the secondary shear for the given configuration. Please forgive me for any calculation mistake and do comment for any short of queries.

Please give thumbs up if you liked my efforts.

samet mamat answered 7 months ago

Next > < Previous

Related Solutions

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11...

A rectangular waveguide of width w and height h has cut-off frequencies for TE10 and TE11 modes in the ratio 1 : 2. The aspect ratio ?

You are shooting a rectangular target with width w and height h. Assume that hitting any...

You are shooting a rectangular target with width w and height h. Assume that hitting any point inside the rectangle is equally likely. Let X be the distance of the point you hit to the center of the rectangle. Find the PDF, CDF, mean and variance of X.

Design a rectangular milk carton box of width w, length ll, and height h which holds...

Design a rectangular milk carton box of width w, length ll, and height h which holds 540 cm^3 of milk. The sides of the box cost 1 cent/cm^2 and the top and bottom cost 3 cent/cm^2. Find the dimensions of the box that minimize the total cost of materials used.

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5...

In a rectangular cross-section canal with a width of 10 m and a depth of 1.5 m, uniform and Continuous current monitoring is applied. The channel's Manning coefficient includes 0.015. Base because its slope is 0.0005. Considering this information a) By writing the numerical magnitude of water face slope and energy line slope and its rationale Set. b) Calculate the speed of the current in the channel. c) Calculate the flow of the current in the channel. d ) When...

the engineers wants to check the strength of hollow rectangular section of size 20 cm X...

the engineers wants to check the strength of hollow rectangular section of size 20 cm X 24 cm and 16 cm X 20 cm. For that purpose how will you help the engineers in finding the strength by using its moment of inertia, polar moment of inertia and radius of gyration?

Consider a rectangular plate of width L and height W. Three of the sides (left, bottom,...

Consider a rectangular plate of width L and height W. Three of the sides (left, bottom, and right side) are maintained at a constant temperature of T1 whereas the top side is maintained at T2. Write a general computer program to solve for the steady state temperature solution of the plate using finite difference techniques and the Gauss-Seidel iterative method for any arbitrary grid mesh m x n. Obtain a temperature solution using a grid mesh of 10x10, 20x20, and...

The length ℓ, width w, and height h of a box change with time. At a...

The length ℓ, width w, and height h of a box change with time. At a certain instant the dimensions are ℓ = 4 m and w = h = 1 m, and ℓ and w are increasing at a rate of 8 m/s while h is decreasing at a rate of 2 m/s. At that instant find the rates at which the following quantities are changing. (a) The volume. (b) The surface area. (c) The length of a diagonal....

The length l, width w, and height h of a box change with time. At a...

The length l, width w, and height h of a box change with time. At a certain instant the dimensions are l = 2 m and w = h = 3 m, and l and w are increasing at a rate of 7 m/s while h is decreasing at a rate of 5 m/s. At that instant find the rates at which the following quantities are changing. (a) The volume. m3/s (b) The surface area. m2/s (c) The length of...

2) Imagine an infinitely long hollow metal pipe with a rectangular cross section. The four sides...

2) Imagine an infinitely long hollow metal pipe with a rectangular cross section. The four sides are placed at x = −a and x = a, and at y = −b and y = b. The two sides on the x-axis (and parallel to the y-z plane) are held at V = 0, the two sides on the y-axis (and parallel to the x-z plane) are held at a constant positive potential V = V0. Imagine that each infinite plate...

Design of Rectangular Beams with Tension Reinforcement Design a rectangular beam section (i.e., select b, h,...

Design of Rectangular Beams with Tension Reinforcement Design a rectangular beam section (i.e., select b, h, and the required tension reinforcement) at midspan for a 22 ft-span simply supported beam that supports its own self-weight, a superimposed uniform dead load of 1.25 kip/ft, and a uniform live load of 2 kip/ft. The material properties are f 0 c = 4, 500 psi and fy = 60, 000 psi. Consider a clear cover of 1.5 inches to the #4 stirrups. Follow...

Subjects