the engineers wants to check the strength of hollow rectangular section of size 20 cm X...

the engineers wants to check the strength of hollow rectangular section of size 20 cm X 24 cm and 16 cm X 20 cm. For that purpose how will you help the engineers in finding the strength by using its moment of inertia, polar moment of inertia and radius of gyration?

Expert Solution

Since there are some equations, I preferred a handwritten note. Hope that it is clear for you and it really helped you.

If you are clear, please help me by rating it with a thumbs up.

In case of any doubt, please feel free to ask in the comment section. Thank you.

Ally Wells answered 9 months ago

The rectangular hollow section in this welded assembly has a height of h=73mm, a width of...

The rectangular hollow section in this welded assembly has a height of h=73mm, a width of w=48mm and a length L=592mm. For the weld in this assembly, calculate either the Unit second polar moment of Area or the Unit Second Moment of Area, whichever is required to determine the secondary shear stress for this weld loading condition. Provide your answer in m3.

2) Imagine an infinitely long hollow metal pipe with a rectangular cross section. The four sides...

2) Imagine an infinitely long hollow metal pipe with a rectangular cross section. The four sides are placed at x = −a and x = a, and at y = −b and y = b. The two sides on the x-axis (and parallel to the y-z plane) are held at V = 0, the two sides on the y-axis (and parallel to the x-z plane) are held at a constant positive potential V = V0. Imagine that each infinite plate...

Consider a thin flat rectangular region that of size 4 x 2 m2 and it is...

Consider a thin flat rectangular region that of size 4 x 2 m2 and it is electrically insulated at its four corners. (A)Solve Laplace’s equation  2 V(x,y) = 0 in the rectangular region 0 < x < 4 m and 0 < y < 2 m using the separation of variable technique subject to the following boundary conditions: V(0,y) = 0 V(4,y) = q(y) = 50 sin (3π y / 2) V(x,0) = 0 V(x,2) = f(x) =100 sin...

A 12 in. x 18 in. rectangular beam has an effective span of 20 ft. A...

A 12 in. x 18 in. rectangular beam has an effective span of 20 ft. A dead load of 1500 lb/ft (includes self weight) and a live load of 4000 lb/ft is applied to the beam. The concrete and steel strengths are 4000 psi and 60000 psi respectively. Design and detail the shear reinforcement for the beam. Assume d is 2 inches less than h

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of...

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of the column is 9.0 inches. A) Calculate the transition slenderness ratio (Sr)D for this column. [Answer should be 69.9] B) Calculate the slenderness ratio for your assigned column length. [Answer should be 62] C) Calculate the maximum unit load (Pcr/A) for the bar. Indicate whether the column is a Johnson or Euler column. [Numerical answer should be 25296 psi but I don't know Johnson...

A) If the thickness of the chest is 20 cm, what percentage of X-rays are transmitted...

A) If the thickness of the chest is 20 cm, what percentage of X-rays are transmitted through the chest at a certain incident X-ray energy assuming HVL values of 3.5 and 1.8 cm for muscle and bone, respectively, and the bone thickness to be 4 cm and muscle thickness 16 cm. B) If CT images are acquired at the same X-ray energy as above, calculate the CT numbers for muscle and bone voxels assuming the linear attenuation coefficient of water...

Check section W 14 X 132 for the column C1 subjected to the following loads Pu=...

Check section W 14 X 132 for the column C1 subjected to the following loads Pu= Mux= Muy= Let Lb = [ 10 ] ft (Base Plate) Then Design the Base Plate for the W-Shaped Column C1 consider the axial load only (ignore My & Mx). The column C1 section is [W 14X 132] and it is subjected to a factored axial compression load Pu= [280 + 6 ] kips. Assume concrete compressive strength 4 ksi , Fu (steel plate...

An I-section joist 450 mm x 250 mm x 20 mm is used as a strut...

An I-section joist 450 mm x 250 mm x 20 mm is used as a strut with one end fixed and the other end free carrying a buckling load of 200 × 106 N. Suggest the changes to be made in the length of the strut for a constant flexural rigidity by considering both the ends to be hinged, both the ends to be fixed and one end fixed but the other end hinged. Compare the values of the safe...

X has a distribution with mean = 70 and standard deviation = 20. The sample size...

X has a distribution with mean = 70 and standard deviation = 20. The sample size is 16. Find P(66 < or equal to x bar < or equal to 71)

Consider a block of size 30 mm x 20 mm x 10 mm made of two...

Consider a block of size 30 mm x 20 mm x 10 mm made of two metallic materials, the stronger material for the bottom half of the block and the weaker material for the top half. The displacements of 8 material points of the block have been measured after certain loading and they are given in the Table below. (a) Determine the distributions of displacements, strains and stresses in the block, in the xyz co-ordinate system. Choose two suitable isotropic...

Question