Question

In: Other

A tray tower provides 10 equilibrium stages for stripping ammonia from a wastewater stream by using...

A tray tower provides 10 equilibrium stages for stripping ammonia from a wastewater stream by
using a countercurrent air stream at 1 atm and 300 K. Assume that the inlet water concentration
is 0.2 mole% ammonia, the inlet air does not have ammonia, and 1 SCM (standard cubic meter)
of air is fed to the tower per kilogram of wastewater. Here the equilibrium curve is linear with
m= 1.414.
(a) Estimate the outlet molar concentration in the exit water.
(b) Assuming that the Murphree efficiency for the process is 65%, estimate the number of
real trays required for this process.
(c) How many real trays would be required to achieve ½ of the concentration in (a)?

Solutions

Expert Solution

I hope you can understand the solution.

Thank you!!!

Amanda K answered 2 years ago
Next > < Previous

Related Solutions

A wastewater plant needs to reduce the methane content in water in a stripping tower to...
A wastewater plant needs to reduce the methane content in water in a stripping tower to 0.3 mol %. The liquid stream is entering the tower with a flow rate of 200 mole/h and contains 0.8 mol % methane. The tower uses pure air for stripping and its temperature and pressure are held constant at 300 K and 1 atm, respectively. The equilibrium relation for methane in the air-water system is ? = 1.2?. a) Find the minimum vapor flow...
Wastewater from Taman Cenderawasih is treated through a bio tower. These are the data related to...
Wastewater from Taman Cenderawasih is treated through a bio tower. These are the data related to the bio tower: Flow rate = 20 000 m3/day Minimum temperature of the area = 34◦C Medium height = 2 m Influent BOD = 300 mg/L Effluent BOD = 20 mg/L Recirculation flow rate to the tower = 35 000 m3/day Wastewater treatability constant = 0.09 min-1 at temperature 20◦C Medium coefficient = 0.5 Compute: Ratio of recycled flow to the influent flow Hydraulic...
Wastewater from Taman Cenderawasih is treated through a bio tower. These are the data related to...
Wastewater from Taman Cenderawasih is treated through a bio tower. These are the data related to the bio tower: Flow rate = 20 000 m3/day Minimum temperature of the area = 34◦C Medium height = 2 m Influent BOD = 300 mg/L Effluent BOD = 20 mg/L Recirculation flow rate to the tower = 35 000 m3/day Wastewater treatability constant = 0.09 min-1 at temperature 20◦C Medium coefficient = 0.5 Compute: Ratio of recycled flow to the influent flow Hydraulic...
An environmental activist research group collects 16 samples from a wastewater effluent stream of a chemical...
An environmental activist research group collects 16 samples from a wastewater effluent stream of a chemical plant in Bhopal (India) and measures the concentration of a potent cyanide-based toxin. Their results yield a mean concentration of ?. ? ?pm with a sample variance of ?. ?5 ???^?. It may be assumed that the data are the realization of a normally distributed random variable. (a) What is the two-sided 98% confidence interval for the measured toxin concentration in the effluent stream?...
An aerobic, continuous-strirred-tank-reactor system is used to oxidize formaldehyde in a wastewater stream from a particle...
An aerobic, continuous-strirred-tank-reactor system is used to oxidize formaldehyde in a wastewater stream from a particle board manufacturing facility. The initial formaldehyde concentration is 50 mg/L, the degradation rate constant is 0.18/day, the flow rate is 400 gal/min, and the reactor volume is 12,000 gal. Determine (a) the concentration of formaldehyde in the treated effluent and (b) the amount of oxygen required (lb/d) to carry out the process.
Question 610 pts A BOD test is run using 10 mL of treated wastewater. Chemicals to...
Question 610 pts A BOD test is run using 10 mL of treated wastewater. Chemicals to inhibit nitrification were added. The initial dissolved oxygen (DO) in the bottle is 9.5 mg/L and after 5 days, the DO is 5.0 mg/L. For the bottles that were allowed to run for 20 days, the DO is 4.0 mg/L. A similar test was done where nitrification was not inhibited. The initial DO was the same and the DO after 20 days was 3.0...
Using a pH 10 buffer solution of aqueous ammonia and aqueous ammonium chloride, for what reason...
Using a pH 10 buffer solution of aqueous ammonia and aqueous ammonium chloride, for what reason are we buffering the solution to be basic? What would happen to the structure of EDTA without a buffer? Explain how this would affect titration.
Using the regime-theory method, design a channel to carry wastewater from a manufacturing plant. Assume a...
Using the regime-theory method, design a channel to carry wastewater from a manufacturing plant. Assume a design discharge of 950 ft3/s.950 ft3/s. The channel will have a sand bed and banks. Use a Manning’s roughness coefficient of 0.025. Assume: Water Temp = 60°F, slope = 0.25%
Using the regime-theory method, design a channel to carry wastewater from a manufacturing plant. Assume a...
Using the regime-theory method, design a channel to carry wastewater from a manufacturing plant. Assume a design discharge of 950 ft3/s.950 ft3/s. The channel will have a sand bed and banks. Use a Manning’s roughness coefficient of 0.025. Assume: Water Temp = 60°F, slope = 0.25%
Ammonia is produced directly from nitrogen and hydrogen by using the Haber process. The chemical reaction...
Ammonia is produced directly from nitrogen and hydrogen by using the Haber process. The chemical reaction is N2(g)+3H2(g)?2NH3(g) Answer is in kJ / 2moles NH3 Part A.Use bond enthalpies to estimate the enthalpy change for the reaction. Express your answer using two significant figures. Part C. Calculate the true enthalpy change as obtained using ?H?f values. Express your answer using two significant figures. Part D. Compare the enthalpy change you calculate in (a) to the true enthalpy change as obtained...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT