Hydrogen at 25oC and 0.1 Mpa is fed to the head of a cutting torch. Calculate...

Hydrogen at 25^oC and 0.1 Mpa is fed to the head of a cutting torch. Calculate the adiabatic flame temperature if the hydrogen is burned with 250% excess air at at 25^oC and 0.1 Mpa,

a) without taking into account dissociation

b) assuming equilibrium composition of water has been achieved (both dissociation reactions of water reach chemical equilibrium)

Solutions

Expert Solution

thank you.

samet mamat answered 8 months ago

Next > < Previous

Related Solutions

Hydrogen at 25oC and 0.1 Mpa is fed to the head of a cutting torch. Calculate...

Hydrogen at 25oC and 0.1 Mpa is fed to the head of a cutting torch. Calculate the adiabatic flame temperature if the hydrogen is burned with 256% excess air at at 25oC and 0.1 Mpa, a) without taking into account dissociation b) assuming equilibrium composition of water has been achieved (both dissociation reactions of water reach chemical equilibrium)

determine the speed of sound in refrigerant-134a at 0.1 MPa and 60°C

Calculate pH of 0.1 M potassium hydrogen oxalate. pKa1=1.25, pKa2=4.27. Calculate pH of solution prepared from...

Calculate pH of 0.1 M potassium hydrogen oxalate. pKa1=1.25, pKa2=4.27. Calculate pH of solution prepared from 0.1 mole of formic acid and 0.02 mole of NaOH diluted to 1L. pKa=3.75. You have 100 mL of 1 M ammonia solution (pKa=9.25). What volume of 1 M hydrochloric acid is needed to prepare buffer with pH=9.5? What will be pH of a 100 mL buffer solution containing 0.064 M of acetic acid and 0.036 M of sodium acetate, after addition of 1...

4) Calculate [H+] of a 0.135M HOCl solution at 25oC.

Two kilograms of steam initially at 200 degrees Celsius and 0.1 MPa are to be reversibly...

Two kilograms of steam initially at 200 degrees Celsius and 0.1 MPa are to be reversibly and adiabatically compressed to 10 bar. Determine the final temperature and the work required.

Which of these has the lower concentration of hydrogen ions: 0.1 M H2SO4, 0.1 M HCl,...

Which of these has the lower concentration of hydrogen ions: 0.1 M H2SO4, 0.1 M HCl, CaCO3, or pure water?

Consider a rigid, thick-walled tube that is filled with H2O liquid and vapor at 0.1 MPa....

Consider a rigid, thick-walled tube that is filled with H2O liquid and vapor at 0.1 MPa. After it is sealed, it is heated so that it passes through its critical point. What fraction of the mass in the tube is liquid?

0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a...

0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a cylinder with a piston. The gas was compressed (polytropic process) and a ratio of heat exchanged during the process to the work of compression was ¼. Find the final temperature and pressure of the gas if 15 KJ of heat was transferred to the surroundings. Specific heats at constant volume and pressure were 654.67 J/Kg/K and 897.64 J/kg/K, respectively.

1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C....

1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C. The pressure leaving the compressor is 1.0 MPa, and the maximum temperature in the cycle is 1100?C. Determine The pressure and temperature at each point in the cycle. The compressor work, turbine work, and cycle efficiency. For each control volume analysed, the model is ideal gas with constant specific heat at 300 K, and each process is steady state with no kinetic or potential...

Thermodynamics 1. Correct Answer: 8.0087 ± 0.1% Steam at 1 MPa, 593.2oC, expands in a turbine...

Thermodynamics 1. Correct Answer: 8.0087 ± 0.1% Steam at 1 MPa, 593.2oC, expands in a turbine to 0.01 MPa. If the process is isentropic, find the specific entropy (kJ/kg-K) at the exit of the turbine. Note: Give your answer to four decimal places. 2. Correct Answer: 301.43 ± 0.08% Initially, an insulated rigid tank contains 19.37 kg of water at 27.04oC and 101 kPa. The tank also contains a 4.42 kg copper block at 87.13oC. Assume constant specific heats where Cwater...

Subjects