Question
In: Mechanical Engineering
0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a...
0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a cylinder with a piston. The gas was compressed (polytropic process) and a ratio of heat exchanged during the process to the work of compression was ¼. Find the final temperature and pressure of the gas if 15 KJ of heat was transferred to the surroundings. Specific heats at constant volume and pressure were 654.67 J/Kg/K and 897.64 J/kg/K, respectively.
Solutions
samet mamat answered 2 years agoRelated Solutions
Steam is contained in a 4-liter volume at a pressure of 1.5 MPa and a temperature...
Steam is contained in a 4-liter volume at a pressure of 1.5 MPa
and a temperature of 200°C. If the pressure is held constant by
expanding the volume while 40 kJ of heat is added, find the final
temperature. use enthalpy.
Consider now a turbine that operates with steam with T1 = 450◦C and P1= 8.0 MPa...
Consider now a turbine that operates with steam with T1 = 450◦C
and P1= 8.0 MPa and P2 = 30 kPa. The efficiency is 80% and the mass
flow rate is 80 kg/s. You may assume the velocities are zero. You
may also assume q=0.
What is the exhaust temperature and quality (if saturated) for
100% efficiency?
Q1 (a)0.5 kg of water is contained in a rigid vessel at a temperature of 125oC...
Q1 (a)0.5 kg of water is contained in a rigid vessel at a
temperature of 125oC and a pressure of 232.1 kPa. The specific
enthalpy is 1050 kJ•kg-1. Which of the following could also be
correct?
(A) v = 0.001065 m3 •kg-1 (B) v = 0.7706 m3 •kg-1 (C) x = 0.24
(D) x = 0.5
(b).0.020 kg of air, initially at 20oC is compressed in a
perfectly insulated and sealed cylinder which is fitted with a
moveable piston. A...
V1 = 5000L P1 = 5bar t1 = 15C. How does the pressure, temperature and density...
V1 = 5000L P1 = 5bar t1 = 15C. How does the pressure,
temperature and density change when the air is quickly compressed
to half of its original volume? Compression is isenthropic
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank
of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and
transfers energy to the air at a constant rate of 1 kW for 100s.
The temperature of the air increases to 600 K.
(a) What is the final pressure of the air (kPa)
(b)Calculate the heat transfer (kJ) for the process (use a
constant, average specific heat)
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank
of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and
transfers energy to the air at a constant rate of 1 kW for 100s.
The temperature of the air increases to 600 K.
(a) What is the final pressure of the air (kPa)
(b)Calculate the heat transfer (kJ) for the process (use a
constant, average specific heat)
A 3-kg mass of metal of specific heat = 0.1 kcal/kg°C at a temperature of 600°C...
A 3-kg mass of metal of specific heat = 0.1 kcal/kg°C at a
temperature of 600°C is dropped into 1.0 kg water at 20°C. With no
heat losses to the surroundings, determine the equilibrium
temperature of the mixture, and if it is 100°C, calculate what mass
of water is turned into steam at this temperature.
Group of answer choices 100°C and 110 g of steam 100°C and 150 g
of steam 100°C and 130 g of steam 100°C and 70...
1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100 kPa and...
1. Air enters a steady-state diffuser at T1 = 20 °C, P1 = 100
kPa
and leaves at P2 = 105 kPa. You may assume an adiabatic
diffuser and constant specific heats. Find T2 if:
a) V1 = 10 m/s, V2 = 0 m/s
b) V1 = 100 m/s, V2 = 90 m/s
c) V1 = 500 m/s, V2 = 490 m/s
d) V1 = 1000 m/s, V2 = 990 m/s
A gas sample has a temperature of 20. ∘C with an unknown volume. The same gas...
A gas sample has a temperature of 20. ∘C with an unknown volume.
The same gas has a volume of 449 mL when the temperature is 89 ∘C,
with no change in the pressure and amount of gas. Part A What was
the initial volume, in milliliters, of the gas? Express your answer
using three significant figures.
0.5 mole of a monatomic ideal gas is loaded into a cylinder and contained by a...
0.5 mole of a monatomic ideal gas is loaded into a cylinder and
contained by a frictionless piston. The piston is set so that there
is an initial volume of 2L. The gas in the cylinder is at a
temperature of 298K. The gas is allowed to expand adiabatically
against 1 atm of pressure. Calculate V/n initial, q per mole, w per
mole, delta U per mole, delta S per mole and delta H per mole. What
is the final...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- 1. You must evaluate a proposal to buy a new milling machine. The base price is...
- Could you please write an article on Software Engineering Trends in about 300 words? Please, also...
- A)Given a generic array with ‘n’ items (not only integers). Give a solution for checking whether...
- Explain virtualization as a key technology in cloud computing environments, as well as the purpose of...
- A system is set up to take raw grading information from the console and calculate a...
- I have an 8 by 8 array that has values ranging from 1-64. I am wanting...
- The background information and instruction of the question is provided below, and i only asked for...
ADVERTISEMENT