Question

In: Other

A gas stream containing 3% A is passed through a packed column to remove 99% of...

A gas stream containing 3% A is passed through a packed column to remove 99% of A by absorption in water. The absorber will operate at 25 C and 1 atm, and the gas and liquid rates are to be 20 mole/h ft2 and 100 mole/h ft2 respectively. Mass transfer coefficient and equilibrium data are as follows:

y* = 3.1 x at 25 C

k_xa = 60 mol/h ft3 unit mol fraction

k_ya = 15 mol/h ft3 unit mol fraction

a)Evaluate Noy, Hoy, and ZT

b) Calculate ZT using Nox and Hox

(NB: Please don't copy paste the solution from google' web, because i dont know what equation did they use to compute for the unknown. Please help wiith complete equations, explanation for this problems and diagram. Thank You <3 )

Solutions

Expert Solution


Related Solutions

Air containing 1.6 vol% sulphur dioxide is scrubbed withpure water in a packed column of 1.5...
Air containing 1.6 vol% sulphur dioxide is scrubbed withpure water in a packed column of 1.5 m2 cross sectional area and 3.5 m heightpacked with no.2 plastic Intalox saddles, at a pressure of 1 atm. Total gasflow rate is 0.062 kmol/s, the liquid flow rate is 2.2 kmol/s, and the outlet gassulphur dioxide concentration is y = 0.004. At the column temperature, theequilibrium relationship is given by y = 40x. (a) What is L/Lmin (b) Calculate NOG. (c) Determine HOG....
A liquid stream ,F, containing A and B is fed to a distillation column. Given: Mole...
A liquid stream ,F, containing A and B is fed to a distillation column. Given: Mole fraction of A in the feed is 0.65 A is the more volatile component The enthalpy of the feed as a saturated vapor = 1125 btu/lbmol The enthalpy of the feed as a saturated liquid = 140 btu/lbmol The enthalpy of the feed as fed to the column = 440 btu/lbmol 1) What is q? (Correct answer is 0.69543) If the feed line equation...
A stream containing toluene (T), heptane (H) and benzene (Z) is fed into a distillation column...
A stream containing toluene (T), heptane (H) and benzene (Z) is fed into a distillation column at a rate of 200kmol/hr. The composition of the feed has molar fractions for T of 0.4, H of 0.2, Z of 0.4. The amount of toluene in the bottoms is 60% the amount of toluene in the distillate. The molar fraction of hexane in the bottom stream is 1/21 and the molar fraction of benzene in the distillate is 2/19. Solve for the...
An ion exchange column containing 99.3 g of amberlite ion exchange resin was used to remove...
An ion exchange column containing 99.3 g of amberlite ion exchange resin was used to remove Cu2+ from a solution where Co = 0.452 M CuSO4. The tower height = 30.5 cm and diameter =2.59 cm. The flow rate was 1.37 cm3 solution/s to the tower. The breakthrough data are shown below: Time (s)                               C [ Cu mol g]/L 420                                         0 480                                    0.0033 510                                      0.0075 540                                       0.0157 600                                         0.0527 660                                           0.1063 720                                            0.1433 780                                           0.1634 810                                              0.1722 870                                              0.1763 900                                               0.180...
An ion exchange column containing 99.3 g of amberlite ion exchange resin was used to remove...
An ion exchange column containing 99.3 g of amberlite ion exchange resin was used to remove Cu2+ from a solution where Co = 0.452 M CuSO4. The tower height = 30.5 cm and diameter =2.59 cm. The flow rate was 1.37 cm3 solution/s to the tower. The breakthrough data are shown below: Time (s)                                 C [ g Cu mol/L ] 420                                            0 480                                           0.0033 510                                          0.0075 540                                          0.0157 600                                          0.0527 660                                           0.1063 720                                           0.1433 780                                          0.1634 810                                          0.1722 870                                           0.1763 900                                           0.180 The...
500 kgmol/h of a gas stream containing 2% of component A is to be purified using...
500 kgmol/h of a gas stream containing 2% of component A is to be purified using gas absorption. The vent from the absorber can contain no more than 0.5 kgmol/h of A. Two scrubbing liquids, P and Q, are available. a. For liquid Q, m=0.45. How many stages are required in the scrubber for 1.5 times the minimum liquid rate? The incoming Q contains no A. 2 b. For liquid P, m=0.25. If liquid P is used in the scrubber...
A waste gas stream containing 5.5% ammonia in air is being stripped of the bulk of...
A waste gas stream containing 5.5% ammonia in air is being stripped of the bulk of the ammonia by absorbing it in water in a tray tower. The liquid to gas ratio on a molal basis is known to be 2.5. Both the inlet gas and inlet water streams enter at 25oC. The inlet and outlet gas streams may be assumed to be saturated with water vapour. During operation a thermocouple in the outlet liquid stream measures a temperature of...
A current of 6.15×104 A is passed through an electrolysis cell containing molten MgCl2 for 6.50...
A current of 6.15×104 A is passed through an electrolysis cell containing molten MgCl2 for 6.50 days. (a) How many grams of magnesium are produced? _____g (b) How many liters of chlorine are collected, if the gas is at a temperature of 273 K and a pressure of 1.00 atm? _____L
A 10.45-m3 sample of gas (310K, 745mmHg pressure) was passed through a series of traps that...
A 10.45-m3 sample of gas (310K, 745mmHg pressure) was passed through a series of traps that removed teh water from the gas. The gas that came out was found to be at 780mmHg pressure and 273K. Its volume was 8.73-m3. What was the percentage of water vapor (v/v) in the original sample of gas? Assume ideal behavior for all gasous compounds.
A mixer is used to mix 3 different streams. Stream A is an acid solution containing...
A mixer is used to mix 3 different streams. Stream A is an acid solution containing HNO3 = 2% weight, H2SO4 = 57% weight. Stream B contains nitric acid solution with composition of 90% weight HNO3. Stream C is a concentrated sulfuric acid solution containing 93% weight H2SO4. The mixture of those 3 streams flown out from the mixer with a flowrate of 1000 kg/hour and composition of: HNO3 = 27% weight, H2SO4 = 60% weight. a) Draw a block...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT