A liquid stream ,F, containing A and B is fed to a distillation column. Given: Mole...

A liquid stream ,F, containing A and B is fed to a distillation column.

Given:
Mole fraction of A in the feed is 0.65
A is the more volatile component
The enthalpy of the feed as a saturated vapor = 1125 btu/lbmol
The enthalpy of the feed as a saturated liquid = 140 btu/lbmol
The enthalpy of the feed as fed to the column = 440 btu/lbmol

1) What is q? (Correct answer is 0.69543)
If the feed line equation is of the form y = mx + b (in terms of the more volatile component):
2) What is m? (Correct answer is -2.28332)
3) What is b? (Correct answer is 2.13417)

*The correct answers are there please show the work on how to get the answer given*

Expert Solution

Amanda K answered 1 year ago

A stream containing toluene (T), heptane (H) and benzene (Z) is fed into a distillation column...

A stream containing toluene (T), heptane (H) and benzene (Z) is fed into a distillation column at a rate of 200kmol/hr. The composition of the feed has molar fractions for T of 0.4, H of 0.2, Z of 0.4. The amount of toluene in the bottoms is 60% the amount of toluene in the distillate. The molar fraction of hexane in the bottom stream is 1/21 and the molar fraction of benzene in the distillate is 2/19. Solve for the...

A distillation column receives a feed that is 40 mole % n-pentane and 60 mole %...

A distillation column receives a feed that is 40 mole % n-pentane and 60 mole % n-hexane. The feed is saturated liquid at 2,500 lbmol/hr. The column is at 1 atm. A distillate that is 97 mole % n-pentane is desired. A total condenser is used. The reflux is a saturated liquid. The external reflux ratio is L0/D = 3. The bottoms from the partial reboiler is 2 mole % n-pentane. Determine the intersection (xq, yq) of the q-line with...

2500 mol/min of a liquid stream containing 1% component B is to be treated by stripping...

2500 mol/min of a liquid stream containing 1% component B is to be treated by stripping with air. The incoming air contains 0.01% B, and the liquid leaving the stripper is to contain 0.01% B. The Henry’s law constant is 1.5. a. What is the minimum required gas rate? b. If the gas rate is 1.15 times the minimum gas rate, how many theoretical stages are required?

Why do we need to maintain liquid level in the bottom of distillation column? (also liquid...

Why do we need to maintain liquid level in the bottom of distillation column? (also liquid level in accumulator)? Is there relation between maintaining liquid level in the bottom of distillation column with operability of kettle reboiler?

one mole of a liquid solution containing 60.0 mole% benzene and the remainder toluene enters a...

one mole of a liquid solution containing 60.0 mole% benzene and the remainder toluene enters a flash column.The liquid product stream contains 47.0 mole% benzene and the vapor product stream contains 69.0 mole % benzene.The temperature of both output stream is at 93oC.If the operation is adiabatic,what is the temperature of the input stream that enters the flash column?

a stream consisting of 44.6 mole% benzene and 55.4% toluene is fed at a constant rate...

a stream consisting of 44.6 mole% benzene and 55.4% toluene is fed at a constant rate to a process unit that produces two product streams, one a vapor and the other a liquid. The vapor flow rate is initially zero and asymptotically approaches half of the molar flow rate of the feed stream. Throughout this entire period, no material accumulates in the unit. When the vapor flow rate has become constant, the liquid is analyzed and found to be 28.0...

A 60% mole Benzene and 40% mole Toluene mixture is sent to a distillation column, where it is separated into two equal streams.

A 60% mole Benzene and 40% mole Toluene mixture is sent to a distillation column, where it is separated into two equal streams. Calculate the composition of each stream, if the amount of benzene out of the top is 3 times greater than out the bottom.

Toluene Chiller A stream of liquid toluene at 100°C is fed to a chiller at a...

Toluene Chiller A stream of liquid toluene at 100°C is fed to a chiller at a flow rate of 4.00 kg/min. The stream exits the chiller at 15°C. The heat capacity for liquid toluene can be estimated from the following equation (Cp in kJ/(mol*°C) and T in °C): = 0.1488 + (32.4 10−5) a) Draw a flow sheet for this problem, labeling all known variables; b) State assumptions required to solve the energy balance; c) Write the mass balance for...

a liquid containing 60 mole percent benzene and 40 mole percent water is heated to 373k....

a liquid containing 60 mole percent benzene and 40 mole percent water is heated to 373k. Calculate the total pressure and the composition of the vapor in equilibrium with its liquid. data corresponding to the vapor pressure in millimeters of mercury temperature °C 60 70 80 90 100 110 120 benzene 348 540 756 1008 1338 1740 2215 toluene 150 206 287 404 557 741 990 Water 149 234 355 526 760 1075 1490

If a small stream of liquid A was strongly deflected by a charged object, liquid B...

If a small stream of liquid A was strongly deflected by a charged object, liquid B was moderately deflected, and liquid C was weakly deflected rank the liquids in order of increasing polarity

Question