A house has well-insulated walls. It contains a volume of 90 m3 of air at 295...

A house has well-insulated walls. It contains a volume of 90 m³ of air at 295 K.

(a) Consider heating it at constant pressure. Calculate the energy required to increase the temperature of this diatomic ideal gas by 1.5�C.

(b) If this energy could be used to lift an object of mass m through a height of 2.3 m, what is the value of m?

Expert Solution

genius_generous answered 1 year ago

A storage building with well-insulated walls and containing 750 m3 of air at 315 K is...

A storage building with well-insulated walls and containing 750 m3 of air at 315 K is heated at constant pressure (atmospheric). Consider air to be an ideal diatomic gas. (a) Determine the energy (in kJ) required to increase the temperature of the air in the building by 2.30°C. ____kj (b)Determine the mass (in kg) this amount of energy could lift through a height 2.70 m. _____kg

A workshop with well-insulated walls and containing 450 m3 of air at 305 K is heated...

A workshop with well-insulated walls and containing 450 m3 of air at 305 K is heated at constant pressure (atmospheric). Consider air to be an ideal diatomic gas. (a)Determine the energy (in kJ) required to increase the temperature of the air in the building by 2.90°C. How does the amount of heat required depend on the molar specific heat at constant pressure and the desired change in temperature? What is the value for the molar specific heat at constant pressure?...

An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and...

An insulated rigid tank having a 0.2 m3 volume initially contains air at 400 kPa and 313 K. The amount of paddle-wheel work done on the system is 200 kJ. Calculate the nearest value of entropy change a. 0.66 kJ/K b. 0.88 kJ/K c. None d. 0.44 kJ/K e. 0.33 kJ/K

A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle...

A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 322 K, 0.4 bar. The air receives 481 kJ by work from the paddle wheel. Assuming the ideal gas model with cv = 0.71 kJ/kg • K, determine for the air the amount of entropy produced, in kJ/K.

A well-insulated tank of 50 m3 volume initially contains 16,000 kg of water distributed between liquid...

A well-insulated tank of 50 m3 volume initially contains 16,000 kg of water distributed between liquid and vapor phases at 25°C. Saturated steam at 1500 kPa is admitted to the tank until the pressure reaches 800 kPa. What mass of steam is added (kg)?

A hot air balloon has a volume 3,223 m3 . It is filled with hot air...

A hot air balloon has a volume 3,223 m3 . It is filled with hot air of density 0.96 kg/m 3 . The total mass of cabin, envelope etc is 350 kg. Find the maximum load of the balloon in Newtons if the density of surrounding air is 1.29kg/ m3 Use g = 9.8 m/s2 Calculate answer to one decimal.

An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a...

An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a large vessel holding steam at 40 bar, 480°C. The tank is initially evacuated. The valve is opened only as long as required to fill the tank with steam to a pressure of 20 bar. Determine: (a) the final temperature of the steam in the tank, in °C, the final mass of the steam in the tank, in kg, and (b) the amount of entropy...

A vessel whose walls are thermally insulated contains 2.20 kg of water and 0.450 kg of...

A vessel whose walls are thermally insulated contains 2.20 kg of water and 0.450 kg of ice, all at a temperature of 0.0 ∘C. The outlet of a tube leading from a boiler in which water is boiling at atmospheric pressure is inserted into the water. Part A How many grams of steam must condense inside the vessel (also at atmospheric pressure) to raise the temperature of the system to 25.0 ∘C ? You can ignore the heat transferred to...

A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen...

A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen at 150 kPa, 25 0C. The piston is moved, compressing the nitrogen until the pressure is 1 MPa and the temperature is 150 0C. During this compression process heat is transferred from the nitrogen, and the work done on the nitrogen is 20 kJ. Determine the amount of this heat transfer.

Consider a piston cylinder device with a volume of 0.04 m3 and initially contains air at 293 K and 1 bar.

Consider a piston cylinder device with a volume of 0.04 m3 and initially contains air at 293 K and 1 bar. It is desired to reverse the cycle and use it as a refrigerator. In this case the process would begin with PV1.36 = constant process from an initial state of 293 K and a pressure of 10 Bars. The gas is allowed to expand to a volume 3.5 times the volume of state 1. It then follows a...

Question