Question

In: Physics

A medical cyclotron used in the production of medical isotopes accelerates protons to 6.5 MeV. The...


A medical cyclotron used in the production of medical isotopes
accelerates protons to 6.5 MeV. The magnetic field in the
cyclotron is 1.2 T.
a. What is the diameter of the largest orbit, just before the protons
exit the cyclotron?
b. A proton exits the cyclotron 1.0 ms after starting its spiral
trajectory in the center of the cyclotron. How many orbits
does the proton complete during this 1.0 ms?

Solutions

Expert Solution

(a) The kinetic energy of the proton is given by, \(K E=\frac{1}{2} m v^{2}\)

\(v=\sqrt{\frac{2(K E)}{m}}\)

\(v=\sqrt{\frac{2(6.5 \mathrm{MeV})\left(1.6 \times 10^{-19} \mathrm{~J} / \mathrm{eV}\right)}{1.672 \times 10^{-27} \mathrm{~kg}}}=3.5 \times 10^{7} \mathrm{~m} / \mathrm{s}\)

The radius of the orbit is given by, \(r=\frac{m v}{B q}=\frac{1.672 \times 10^{-27} \mathrm{~kg}\left(3.5 \times 10^{7} \mathrm{~m} / \mathrm{s}\right)}{(1.2 \mathrm{~T})\left(1.6 \times 10^{-19} \mathrm{C}\right)}=0.30 \mathrm{~m}\)

Hence, the diameter of the largest orbit just before the proton leaves the orbit is \(0.60 \mathrm{~m}\).

(b) The time required to complete one revolution is given by, \(T=\frac{2 \pi m}{B q}=\frac{2 \pi\left(1.672 \times 10^{-27} \mathrm{~kg}\right)}{(1.2 \mathrm{~T})\left(1.6 \times 10^{-19} \mathrm{C}\right)}=5.48 \times 10^{-8} \mathrm{~s}\)

The number of revolutions made by the proton is given by, \(T n=t\)

\(n=\frac{t}{T}=\frac{1 \mathrm{~ms}}{5.48 \times 10^{-8} \mathrm{~s}}=1.8 \times 10^{4}\)


Related Solutions

In a cyclotron, the orbital radius of protons with energy 300 keV is 16.4 cm ....
In a cyclotron, the orbital radius of protons with energy 300 keV is 16.4 cm . You are redesigning the cyclotron to be used instead for alpha particles with energy 300 keV . An alpha particle has charge q=+2e and mass m=6.64×10−27kg . A. If the magnetic field isn't changed, what will be the orbital radius of the alpha particles?
a. For your senior project, you would like to build a cyclotron that will accelerate protons...
a. For your senior project, you would like to build a cyclotron that will accelerate protons to 10% of the speed of light. The largest vacuum chamber you can find is 60 cm in diameter.What magnetic field strength will you need? b.What magnetic field strength will levitate the 2.0 g wire in the figure(Figure 1)? Assume that I = 1.9 A and d = 12 cm . c. The magnetic field strength at the north pole of a 2.0-cm-diameter, 8-cm-long...
Briefly describe how radioisotopes are produced from stable isotopes using a nuclear reactor and a cyclotron...
Briefly describe how radioisotopes are produced from stable isotopes using a nuclear reactor and a cyclotron and give at least one example of a radioisotope used in nuclear medicine that is produced in each manner along with the nuclear reaction equation for production of each.
Many radioactive isotopes are used in medicine for imaging and treatment purposes. The specific isotopes used...
Many radioactive isotopes are used in medicine for imaging and treatment purposes. The specific isotopes used depends on the particular organ or body system being studied (for example, Xe-133 is used to image lung function and blood flow.) For thyroid imaging, isotopes of iodine are used, commonly I-123 and I-131, which have half-lives of 13.2 hours and 8.0 days, respectively. Why is iodine used for thyroid imaging (as opposed to any other element)? I-129 is an extremely rare isotope of...
A beam of protons, each with energy E=20 MeV, is incident on a potential step 40...
A beam of protons, each with energy E=20 MeV, is incident on a potential step 40 MeV high. Graph using a computer the relative probability of finding protons at values of x > 0 from x = 0 to x = 5 fm.
examine the element o, with 8 protons. how many stable isotopes does o have?
examine the element o, with 8 protons. how many stable isotopes does o have?
A cyclotron is used to produce a beam of high-energy deuterons that then collide with a...
A cyclotron is used to produce a beam of high-energy deuterons that then collide with a target to produce radioactive isotopes for a medical procedure. Deuterons are nuclei of deuterium, an isotope of hydrogen, consisting of one neutron and one proton, with total mass 3.34×10−27kg. The deuterons exit the cyclotron with a kinetic energy of 5.00 MeV . 1. What is the speed of the deuterons when they exit? Express your answer with the appropriate units. 2. If the magnetic...
Protons having a kinetic energy of 5.00 MeV (1 eV = 1.60 x 10-19 J) are...
Protons having a kinetic energy of 5.00 MeV (1 eV = 1.60 x 10-19 J) are moving in the positive x direction and enter a magnetic field B = 0.025 T directed out of the plane of the page and extending from x = 0 to x = 1.00 m as shown in the Figure below. (a) Ignoring relativistic effects, find the angle α between the initial velocity vector of the proton beam and the velocity vector after the beam...
A mass spectrometer is used to examine the isotopes of uranium. Ions in the beam emerge...
A mass spectrometer is used to examine the isotopes of uranium. Ions in the beam emerge from the velocity selector at a speed of 2.82 ✕ 105 m/s and enter a uniform magnetic field of 0.615 T directed perpendicularly to the velocity of the ions. What is the distance between the impact points formed on the photographic plate by singly charged ions of 235U and 238U? ...cm A solenoid 10.0 cm in diameter and 86.7 cm long is made from...
A mass spectrometer is used to examine the isotopes of uranium. Ions in the beam emerge...
A mass spectrometer is used to examine the isotopes of uranium. Ions in the beam emerge from the velocity selector at a speed of 3.08 ✕ 105 m/s and enter a uniform magnetic field of 0.590 T directed perpendicularly to the velocity of the ions. What is the distance between the impact points formed on the photographic plate by singly charged ions of 235U and 238U? cm
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT