A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is...

A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is being lifted by a steel cable of diameter 30 mm. When the drum is hoisted 10m the natural frequency is measured to be 40 Hz. Determine the volume of the waste in the drum.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

130 kg of uniform spherical particles with a diameter of 60 mm and particle density 1500...

130 kg of uniform spherical particles with a diameter of 60 mm and particle density 1500 kg/m3 are fludised by water (density 1000 kg/m3, viscosity 0.001 Pa s) in a circular bed of cross-sectional area 0.2 m2. The single particle terminal velocity of the particles is 0.98 mm/s and the voidage at incipient fludisation is known to be 0.47. Determine: The minimum fludised velocity and the bed height at incipient fludisation. The mean fludised bed voidage and height when...

130 kg of uniform spherical particles with a diameter of 60 mm and particle density 1500...

130 kg of uniform spherical particles with a diameter of 60 mm and particle density 1500 kg/m3 are fludised by water (density 1000 kg/m3, viscosity 0.001 Pa s) in a circular bed of cross-sectional area 0.2 m2. The single particle terminal velocity of the particles is 0.98 mm/s and the voidage at incipient fludisation is known to be 0.47. Determine: a. The minimum fludised velocity b. height when the liquid flow rate is 2x10-5 m3/s.

Q. Spherical glass particles (12 mm diameter and 2500 kg/m 3 density) and spherical metal particles...

Q. Spherical glass particles (12 mm diameter and 2500 kg/m 3 density) and spherical metal particles (1.5 mm diameter and 7500 kg/m3) are falling in water (density= 1000 kg/m3) . (1) Calculate the terminal falling velocities of glass and metal particles in water for a constant friction factor of 0.22. (2) At what water velocity will fluidized beds of glass particles and metal particles have the same bed densities? The relation between fluidization velocity (uc), terminal velocity (ut) and bed...

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of...

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of 0.1 cm is made of a body-centered-cubic (bcc) paramagnetic material with lattice parameter equal to 0.5 nm. The toroid is wrapped by a copper wire in 20 turns. If each atom of the magnetic material has a magnetic moment of 1.5µB (Bohr Magneton), (a) (1.5 pt) What is the saturation magnetization (in A/m) of the material? (b) (1.5 pt) If a current of 2...

1.Density water = 1 kg/m^3 and density of ice = 90% density of water. How much...

1.Density water = 1 kg/m^3 and density of ice = 90% density of water. How much of an ice cube in your glass of water is below the surface? calculate the specific gravity of ice. (show work ) 2. a piece of cork which weights 0.25 N in air and has a specific gravity of 0.25 . If the cork is allowed to float in water, what fraction of its volume will be above water ?

An open cylinder 30 cm in diameter and 80 cm high containing water is rotated about...

An open cylinder 30 cm in diameter and 80 cm high containing water is rotated about its vertical axis at a speed of 240 rpm. If the Cylinder is brought to rest now, what would be the depth of water in it? If the speed is increased to 420 rpm. How much water will be left in the cylinder in liters? Specific Question If the speed is increased to 420 rpm. How much water will be left in the cylinder...

A diver 60 m deep in 10∘C fresh water exhales a 1.2-cm-diameter bubble. What is the...

A diver 60 m deep in 10∘C fresh water exhales a 1.2-cm-diameter bubble. What is the bubble's diameter just as it reaches the surface of the lake, where the water temperature is 20∘C Assume that the air bubble is always in thermal equilibrium with the surrounding water. Express your answer to two significant figures and include the appropriate units.

A 2.8kg balloon is filled with helium ( density = 0.179 kg/m 3 ). Part A...

A 2.8kg balloon is filled with helium ( density = 0.179 kg/m 3 ). Part A If the balloon is a sphere with a radius of 5.1m , what is the maximum weight it can lift? (N)

a) A block of Aluminum has a density of 2700 kg/m^3 and a mass of 63...

a) A block of Aluminum has a density of 2700 kg/m^3 and a mass of 63 grams. The block is tied to one end of a string and the other end of the string is tied to a force scale. The block is allowed to hang in the air from the string. Calculate the force which will be registered on the scale. b) The block remains tied to the string but is now completely submerged in a container of water....

A 1-mm diameter sphere (density=7900 kg/m3) is dropped into a tank of oil (density=900 kg/m3). The...

A 1-mm diameter sphere (density=7900 kg/m3) is dropped into a tank of oil (density=900 kg/m3). The sphere develops a terminal speed of 0.25 cm/s, what is the oil's viscosity? You may assume a small Reynolds number. Show your work.

Subjects