Question

In: Physics

A diver 60 m deep in 10∘C fresh water exhales a 1.2-cm-diameter bubble. What is the...


A diver 60 m deep in 10∘C fresh water exhales a 1.2-cm-diameter bubble.

What is the bubble's diameter just as it reaches the surface of the lake, where the water temperature is 20∘C

Assume that the air bubble is always in thermal equilibrium with the surrounding water.

Express your answer to two significant figures and include the appropriate units.

Solutions

Expert Solution

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

10) A shower pipe at the beach that is 10 cm in diameter carries water (density...
10) A shower pipe at the beach that is 10 cm in diameter carries water (density 1000 kg/m3 ) up a height of 2.0 m, at which point the pipe narrows to 5 cm and continues another 0.50 m up before the water squires out of the pipe 2.5 m above where it started. Ignore viscosity. a) If the water moves at 1.5 m/s in the wider part of the pipe, what is its speed in the narrower part of...
Water in pipe AB (Figure 2), diameter (DAB) 1.2 m, is flowing with the velocity (VAB)...
Water in pipe AB (Figure 2), diameter (DAB) 1.2 m, is flowing with the velocity (VAB) of 3 m/second. Then it continues to flow through pipe BC, with a diameter (DBC) of 1.5 m and finally flows through branch pipe of CD, diameter (DCD) of 0.8 m and pipe of CE (DCE), with a velocity (VCE) of 2.1 m/second. Calculate: 1. Discharge of pipe AB (QAB) 2. Flow velocity of pipe BC (VBC) 3. Flow velocity of pipe BC (VBC)...
Water at a temperature of 80 °C and velocity of 1.2 m/s is flowing parallel to...
Water at a temperature of 80 °C and velocity of 1.2 m/s is flowing parallel to one side of a smooth flat plate. The plate is maintained at a constant temperature of 24 °C and is 0.8 m long and 0.5 m wide. Determine the following: The heat flux at a distance x = 0.6m from the front edge of the plate, q” = ____________ The location of the maximum heat flux on the plate, x = _________ The total...
A 5-cm diameter copper ball is heated to 300 C. Take h = 10 W/m^2*K. A)...
A 5-cm diameter copper ball is heated to 300 C. Take h = 10 W/m^2*K. A) Make a graph of temperature versus time for copper then for aluminum. Include the Matlab script or Excel data tables for these 2 graphs. B) What value of K would make it so that this situation could not be treated as a lumpted system (Biot-Number < 0.1)?
Drag measurements were taken for a 5 cm diameter sphere in water at 20 °C to...
Drag measurements were taken for a 5 cm diameter sphere in water at 20 °C to predict the drag force of a 1 m diameter balloon rising in air with standard temperature and pressure. Given kinematic viscosity of water (v) = 1.0 X 10-6 m2/s and kinematic viscosity of air (v) = 1.46 X 10-5 m2/s. Perform the Buckingham Pi theorem to generate a relationship for FD as a function of the independent variables. Assume the drag FD is a...
Drag measurements were taken for a 5 cm diameter sphere in water at 20 °C to...
Drag measurements were taken for a 5 cm diameter sphere in water at 20 °C to predict the drag force of a 1 m diameter balloon rising in air with standard temperature and pressure. Given kinematic viscosity of water (v) = 1.0 X 10-6 m2/s and kinematic viscosity of air (v) = 1.46 X 10-5 m2/s. Perform the Buckingham Pi theorem to generate a relationship for FD as a function of the independent variables. Assume the drag FD is a...
A conical tank of diameter 6 m and height 10 m is filled with water. Compute...
A conical tank of diameter 6 m and height 10 m is filled with water. Compute for the work needed to pump all the water 2 m above the tank. The water has a density of 1000 kg per cubic meter.
A pump must suck a well as deep as 20 m, water temperature 25 ° C,...
A pump must suck a well as deep as 20 m, water temperature 25 ° C, how the arrangement puts the pump depth so that water can be pumped perfectly, count and use the required table
air at 110 kpa and 25 degrees C enters a diffuser with diameter of 10 cm...
air at 110 kpa and 25 degrees C enters a diffuser with diameter of 10 cm and 25 cm at entrance and exit. if the velocity of air at the entrance is 15 m/s and leaving the diffuser at 1.5 m/s. determine a.) mass rate of air b.) density of air at the exit
A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is...
A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is being lifted by a steel cable of diameter 30 mm. When the drum is hoisted 10m the natural frequency is measured to be 40 Hz. Determine the volume of the waste in the drum.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT