Question
In: Mechanical Engineering
The mass-spring-damper system has a 2 kg block is displaced by an amplitude of 50 mm...
The mass-spring-damper system has a 2 kg block is
displaced by an amplitude of 50 mm and
released. Ifthc phase angle ofrcsponse is 84.17o, how many cycles
(m) will be executed beforc
the amplitude is reduced to I mm. What are the undamped natural
frequency m« and spring
constant k ifthc period ofdamped oscillation rs is 0.3 scc.
Solutions
Expert Solution
Comments
The value of m is less than one because the system is approx critically damped.
Please Rate and upvote.
samet mamat answered 1 year agoRelated Solutions
a) A block with a mass of 0.600 kg is connected to a spring, displaced in...
a) A block with a mass of 0.600 kg is connected to a spring,
displaced in the positive direction a distance of 50.0 cm from
equilibrium, and released from rest at t = 0. The block then
oscillates without friction on a horizontal surface. After being
released, the first time the block is a distance of 20.0 cm from
equilibrium is at t = 0.200 s.
What is the block's period of oscillation?
b) A block with a mass of...
A spring-mass system has a spring constant of 3 Nm. A mass of 2 kg is...
A spring-mass system has a spring constant of 3 Nm. A mass of 2
kg is attached to the spring, and the motion takes place in a
viscous fluid that offers a resistance numerically equal to the
magnitude of the instantaneous velocity. If the system is driven by
an external force of 9cos(3t)−6sin(3t) N,determine the steady-state
response in the form Rcos(ωt−δ).
A spring-mass system has a spring constant of 3 Nm. A mass of 2 kg is...
A spring-mass system has a spring constant of 3 Nm. A mass of 2
kg is attached to the spring, and the motion takes place in a
viscous fluid that offers a resistance numerically equal to the
magnitude of the instantaneous velocity. If the system is driven by
an external force of 15cos(3t)−10sin(3t) N,determine the
steady-state response in the form Rcos(ωt−δ)
spring-mass system has a spring constant of 3 Nm. A mass of 2 kg is attached...
spring-mass system has a spring constant of 3 Nm. A mass of 2 kg
is attached to the spring, and the motion takes place in a viscous
fluid that offers a resistance numerically equal to the magnitude
of the instantaneous velocity. If the system is driven by an
external force of 15cos(3t)−10sin(3t) N,determine the steady-state
response in the form Rcos(ωt−δ).
R= _________
ω=__________
δ=___________
A spring-mass system has a spring constant of 3 N/m. A mass of 2 kg is...
A spring-mass system has a spring constant of 3 N/m. A mass of 2
kg is attached to the spring, and the motion takes place in a
viscous fluid that offers a resis- tance numerically equal to the
magnitude of the instanta- neous velocity. If the system is driven
by an external force of (12 cos 3t − 8 sin 3t) N, determine the
steady-state response.
(a) Find the gain function if the external force is f(t) =
cos(ωt).
(b)...
For a basic spring-mass-damper system with the following information. Mass = 0.35kg Spring Constant = 10000...
For
a basic spring-mass-damper system with the following information.
Mass = 0.35kg
Spring Constant = 10000 N/m
Initial displacement = 10mm
Initial velocity = 0
Find the equations of motion both north displacement and
velocity with respect to time t for the damping ratios of 0, 0.1
and 1. Please show full working
A block with a mass of 2.50 kg on a spring has displacement as a function...
A block with a mass of 2.50 kg on a spring has displacement as a
function of time given by the equation
x(t)= (7.9 cm) cos [5.5 rad/s) t - 2.42 rad].
Part A: what is maximum kinetic energy during oscillation?
(.......J)
Part B: what is the velocity of block at t = 2.3 s ?
(.....m/s)
Part C: if kinetic energy and potential energy are equal, what
is the positive value of the displacement? (X=.....cm)
A block with a mass of 0.488 kg is attached to a spring of spring constant...
A block with a mass of 0.488 kg is attached to a spring of
spring constant 428 N/m. It is sitting at equilibrium. You then
pull the block down 5.10 cm from equilibrium and let go. What is
the amplitude of the oscillation?
A block with a mass of 0.976 kg is attached to a spring of
spring constant 428 N/m. It is sitting at equilibrium. You then
pull the block down 5.10 cm from equilibrium and let go. What...
the figure, block 2 of mass 2.20 kg oscillates on the end of a spring in...
the figure, block 2 of mass 2.20 kg oscillates on the end of a
spring in SHM with a period of 18.00 ms. The position of the block
is given by x = (0.600 cm) cos(ωt + π/2). Block 1 of mass 4.40 kg
slides toward block 2 with a velocity of magnitude 7.80 m/s,
directed along the spring's length. The two blocks undergo a
completely inelastic collision at time t = 4.50 ms. (The duration
of the collision is...
In the figure, block 2 of mass 2.90 kg oscillates on the end of a spring...
In the figure, block 2 of mass 2.90 kg oscillates on the end of
a spring in SHM with a period of 26.00 ms. The position of the
block is given by x = (0.700 cm) cos(?t + ?/2). Block 1 of mass
5.80 kg slides toward block 2 with a velocity of magnitude 8.70
m/s, directed along the spring's length. The two blocks undergo a
completely inelastic collision at time t = 6.50 ms. (The duration
of the collision...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Suppose Rialto is the only movie cinema in a small college town, so it is essentially...
- With VMI, members of the supply chain share planning, demand, forecasting, and inventory information.
- Large lots are desirable in supply chain coordination despite increasing holding costs.
- ***Convert the C++ to Python*** #include <iostream> using std::cout; using std::cin; using std::endl; int charClass; char...
- Make-or-Buy Decision Fremont Computer Company has been purchasing carrying cases for its portable computers at a...
- The following costs were incurred for the single product produced during the first year of operations...
- Non-constant growth model: Do=$2.00 required return on equity= 5% g= 9% n=1,2 g=7% n=3,4 g=3% n=5...
ADVERTISEMENT