Consider two-dimensional incompressible plane viscous flow between parallel plates a distance 2h apart, with the origin...

Consider two-dimensional incompressible plane viscous flow between parallel plates a distance 2h apart, with the origin along the centerline. The plates are very wide and very long, so that the flow is essentially axial. The present case is where the upper plate moves at velocity V but there is no pressure gradient. Neglect gravity effects. Determine the velocity profile for this flow.

Expert Solution

samet mamat answered 2 years ago

A viscous incompressible fluid is between two parallel plates (that are along the x-z plane), one...

A viscous incompressible fluid is between two parallel plates (that are along the x-z plane), one of them is at y = 0 and the other at y = d. a) Considerthecasewheretheflowisstationaryinthezˆdirection, driven by a pressure gradient. Write down the Navier-Stokes equations and solve for the velocity field after imposing the relevant boundary conditions. [10 points] b) The pressure gradient is now removed, but the plate at y = d is moved in an oscillatory fashion with velocity ue−iωt in...

12-9 Two large parallel plane conducting plates are a distance d apart. The region between them...

12-9 Two large parallel plane conducting plates are a distance d apart. The region between them is filled with two l.i.h. materials whose surface of separation is a plane parallel to the plates. The first material (with properties σ1 and Ɛ1) is of thickness x, while the second material (σ2, Ɛ2) has thickness d - x. There is a steady current between the plates that are kept at constant potentials of φ1 and φ2. Find the potential at the surface...

Consider the steady flow between two flat plates. The plates are 10 cm apart and the...

Consider the steady flow between two flat plates. The plates are 10 cm apart and the width of the channel is 10 cm. Water is the working fluid. The flow velocity varies linearly from zero at the bottom plate to 10 m/s at the top plate. (This general class of flows is known as Couette Flow). Determine the total mass flow and momentum per unit time crossing an imaginary plane across the channel.

Two large, flat metal plates are parallel to each other, a distance d apart. A charge...

Two large, flat metal plates are parallel to each other, a distance d apart. A charge of Q is placed on them and then they are electrically isolated. As a result, at the midpoint between the two plates the electric field has magnitude E. If the separation of the plates is then reduced to d/2 what is the magnitude of the electric field at the midpoint? A) 2E B) E/2 C) 0 D) 4E E) E

A steady two-dimensional laminar fully-developed flow downward between two fixed parallel plates inclined at 50" with...

A steady two-dimensional laminar fully-developed flow downward between two fixed parallel plates inclined at 50" with horizontal is shown in figure. The pressure gradient in the direction of the flow is -3935 N/m' per m. Note the space between parallel plates is 5mm.Use the Navier-Stokes equation in the flow direction to determine: a-Velocity distribution of the flow between two plates. b-Shear stress distribution of the low between two plates. c- The average velocity of the flow d- Maxinmum velocity e-Mininmum...

Consider steady, incompressible, laminar flow of a Newtonian fluid in the narrow gap between two ...

Consider steady, incompressible, laminar flow of a Newtonian fluid in the narrow gap between two infinite parallel plates (Figure \(3(a))\). The top plate is moving at speed \(V\), and the bottom plate is stationary. The distance between these two plates is \(h .\) The gravity acts in the \(z\) direction so the flow can be considered essentially two dimensional in \(x-y\) plane. Assume there acts an applied pressure gradient in the \(x\) -direction with its gradient given by, \(\partial P...

Consider two oppositely charged, isolated parallel plates separated by distance D, with capacitance C, charge Q,...

Consider two oppositely charged, isolated parallel plates separated by distance D, with capacitance C, charge Q, and stored energy U. D is small compared to the dimensions of the plates. For each statement below, select "True" or "False". 1. Because of energy conservation, inserting a dielectric leaves U unchanged. 2. When D is halved, Q stays the same. 3. Inserting a dielectric decreases C. 4. When D is doubled, U increases. 5. When D is doubled, C is doubled. 6....

Consider a two-dimensional ideal flow in the x-y plane (with radial coordinate r2 = x2 +...

Consider a two-dimensional ideal flow in the x-y plane (with radial coordinate r2 = x2 + y2). Given the velocity potentials of 1) a uniform flow, 2) a source φ = (q/2π) ln r, and 3) a dipole φ = −d · r/(2πr2): a) Using the principle of superposition, construct a linear combination of the ingredients above that gives the flow past an infinite cylinder. [10 points] b) Sketch the streamlines of the flow everywhere in space. [10 points]

Two large parallel copper plates are 3.60 cm apart and have a uniform electric field of...

Two large parallel copper plates are 3.60 cm apart and have a uniform electric field of magnitude E = 7.98 N/C between them (see the figure). An electron is released from the negative plate at the same time that a proton is released from the positive plate. Neglect the force of the particles on each other and find their distance from the positive plate when they pass each other.

Suppose two plates lie in parallel horizontal planes, one plate in the xy plane at z =...

Suppose two plates lie in parallel horizontal planes, one plate in the xy plane at z = 0 and the other plate in the plane that is parallel to the xy plane at z = 10 mm. Between the plates is a constant electric field directed vertically upward (that is, in the positive z direction). A proton and an electron are launched in the positive x direction with the same initial velocity from position (0, 0, 5.0 mm). Part A :If...

Question