Air (280 K and atmospheric pressure) enters a 3-m-long rectangular duct (0.15 m by 0.075 m)...

Air (280 K and atmospheric pressure) enters a 3-m-long rectangular duct (0.15 m by 0.075 m) whose surface temperature is at 400 K. Air mass flow rate is 0.10 kg/s. Find the heat transfer and the outlet temperature. Use the Sieder-Tate equation to solve for the heat transfer coefficient.

Solutions

Expert Solution

Solution :

Please upvote buddy

Amanda K answered 1 year ago

Next > < Previous

Related Solutions

Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar,...

Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar, with a volumetric flow rate of 0.25 m3/s, and exits at 325 K, 0.95 bar. The flow area is 0.05 m2. Assuming the ideal gas model with k = 1.4 for the air, determine: (a) the mass flow rate, in kg/s, (b) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer to the air, in kW

Airflow through a long, 0.15-m-square air conditioning duct maintains the outer duct surface temperature at 10°C....

Airflow through a long, 0.15-m-square air conditioning duct maintains the outer duct surface temperature at 10°C. If the horizontal duct is uninsulated and exposed to air at 35°C in the crawlspace beneath a home, what is the heat gain per unit length of the duct? Evaluate the properties of air at 300 K. For the sides of the duct, use the more accurate Churchill and Chu correlations for laminar flow on vertical plates. What is the Rayleigh number for free...

Air enters a compressor at 20 oC and atmospheric pressure, and exits at 200 oC and...

Air enters a compressor at 20 oC and atmospheric pressure, and exits at 200 oC and 0.8 MPa. The output stream flows at a linear velocity of 2 m/s, through an exit diameter of 10 cm. What is the power input to the compressor? (Answer: 16.7 kW)

A coal particle burns in air at 1145 K and atmospheric pressure. The process is limited...

A coal particle burns in air at 1145 K and atmospheric pressure. The process is limited by diffusion of the oxygen counterflow to the CO2 and CO that are formed at the particle surface. Twice as much CO is formed as CO2. Assume that the coal is pure carbon with a density of 1280 kg/m3 and that the particle is spherical with an initial diameter of 0.015 cm. Under the conditions of the combustion process, the diffusivity of oxygen in...

Flow enters a heated duct at v1 = 2000 m/s, T1 = 300 K, and q...

Flow enters a heated duct at v1 = 2000 m/s, T1 = 300 K, and q = 5 x 105 J/kg. Find Mach1 and Mach2 for He, Ne, Ar, Kr, and Xe

Question 3 Air of 0.1kg with a pressure of 0.15 bar and a volume of 0.07...

Question 3 Air of 0.1kg with a pressure of 0.15 bar and a volume of 0.07 m3 are compressed isentropically to a volume of 0.015 m3 . (a) Calculate the work transfer in the compression process (b) Calculate the heat transfer in the compression process (c) Compare (a) and (b) with an isothermal compression process. (d) Sketch the pressure-volume diagram for the isentropic and isothermal processes.

Air enters a nozzle steadily at 280 kPa and 77°C with a velocity of 70 m/s...

Air enters a nozzle steadily at 280 kPa and 77°C with a velocity of 70 m/s and exits at 85 kPa and 320 m/s. The heat losses from the nozzle to the surrounding medium at 20°C are estimated to be 3.2 kJ/kg. The table for the ideal-gas properties of air is given below. Determine the exit temperature. (Round the final answer to one decimal). The exit temperature is ______K Determine the total entropy change for this process. (Round the final...

Air flows through a constant area duct. The pressure and temperature of the air at the...

Air flows through a constant area duct. The pressure and temperature of the air at the inlet to the duct are P1 = 100 kPa absolute, and T1 = 298 K, respectively. Inlet Mach number is M1 = 0.1. Heat is transferred to the air as it flows through the duct and as a result the Mach number at the exit increases. Write a Matlab code and plot the following: a) Find the pressure and temperature at the exit, while...

In a supermarket, air at atmospheric pressure and 25 °C is supplied to an air handling...

In a supermarket, air at atmospheric pressure and 25 °C is supplied to an air handling unit through a rectangular duct with a cross section of 0.5 m x 0.1 m. The air handling unit will distribute 2/3 of the air to the large shopping area of the supermarket at 25 °C, and it will cool the remaining air to -5 °C and distribute it to a walk-in refrigerator. To avoid frictional pressure losses, the average air velocity in the...

Air is cooled from 300 K to 273 K as it flows steadily through a duct....

Air is cooled from 300 K to 273 K as it flows steadily through a duct. Frictional dissipation may be neglected. Cooling is achieved by removing heat via a heat pump. The work requirement is 1.15 times that of a reversible heat pump operating between 263 and 310 K. For each mole of air flowing through the duct, calculate: Air can be assumed an ideal gas with a constant heat capacity cP of 3.50R. The temperature of the surroundings is...

Subjects