Question

In: Mechanical Engineering

saturated humid air at 1 atmosphere and 10 degrees Celsius is to be mixed with atmospheric...

saturated humid air at 1 atmosphere and 10 degrees Celsius is to be mixed with atmospheric air at 1 atmosphere, 32 degrees Celsius and 80 percent relative humidity, to form air of 70 percent relative humidity.
determine,
the proportions at which these two streams are to be mixed and the temperature of the resulting air

Solutions

Expert Solution


Related Solutions

The atmosphere is 0.9% Argon. Calculate the concentration of Argon in atmospheric air at a temperature...
The atmosphere is 0.9% Argon. Calculate the concentration of Argon in atmospheric air at a temperature of 286 K and pressure of 998 mBar
A)   When 155 mL of water at 26 degrees Celsius is mixed with 25 mL of...
A)   When 155 mL of water at 26 degrees Celsius is mixed with 25 mL of water at 85 degrees Celsius what is the final temperature? (Assume that no heat is released to the surroundings, d of water = 1.00 g/mL B) Use twice the volume of each water sample. Calculate final temperature. C) Instead of 75 mL, use 150 mL.  Calculate final temperature. D) Instead of 75 mL, use 25 mL.  Calculate final temperature. E) Discuss your results. How did the...
A mole of air is sampled from the atmosphere when the atmospheric pressure is 765 mm...
A mole of air is sampled from the atmosphere when the atmospheric pressure is 765 mm Hg, the temperature is 25 C, and relative humidity is 75%. The sample of air is placed inside a closed container and heated to 135 C and then compressed to 2 atm. What are the relative humidity, the humidity, and the mole fraction of water in the compressed air?
A mole of air is sampled from the atmosphere when the atmospheric pressure is 765 mmHg,...
A mole of air is sampled from the atmosphere when the atmospheric pressure is 765 mmHg, the temperature is 25 C, an relative humidity is 75%. The sample of air is placed inside a closed container and heated to 135 C and then compressed to 2 atm. What are the relative humidity, the humidity, and the mole fraction of water in the compressed air?
Ethanol boils at 73.30 degrees Celsius at atmospheric pressure. The heat of vaporization, ΔΗvapis 39.3 kJ/mol....
Ethanol boils at 73.30 degrees Celsius at atmospheric pressure. The heat of vaporization, ΔΗvapis 39.3 kJ/mol. The melting point at atmospheric pressure is -114.10 degrees Celsius. The triple point is at pressure 0.00043 Pa and temperature -123.00 degrees Celsius. The density of liquid Ethanol at 25.0 degrees Celsius is 0.783 gr/cm3. What is the vapor pressure of liquid ethanol at 30.00 degrees Celsius? The heat of fusionΔΗmeltis 4.9 kJ/mol. Calculate the change in volume brought about by a transition from...
Calculate the activity at 25 degrees Celsius of NACl(s) at 1, 10, 100, and 1000 bar....
Calculate the activity at 25 degrees Celsius of NACl(s) at 1, 10, 100, and 1000 bar. The density of NaCl at 25 degrees Celsius and 1 bar is 2.16 (g/cm3).
Humid air at 300 kPa, 10°C, and 90% relative humidity is heated in a pipe at...
Humid air at 300 kPa, 10°C, and 90% relative humidity is heated in a pipe at constant pressure to 50°C. Calculate the amount of heat, in kJ/kg dry air, required
A 29.5g ice cube at -10 degrees celsius is place in a thermally insulated container along...
A 29.5g ice cube at -10 degrees celsius is place in a thermally insulated container along with 1.000kg of water initially at 20.0 degrees celsius. determine the final temperature of the system and the amount of heat acquired by the ice during the process and the amount of heat lost by the warm water. PLEASE SHOW WORK AND EQUATIONS USED. I'm struggling to find equations for heat gained, lost, and final temp. thank you.
What is the energy required to turn 1000 cubic centimeters of ice at -10 degrees Celsius...
What is the energy required to turn 1000 cubic centimeters of ice at -10 degrees Celsius into water at 90 degrees Celsius
If my thermometer reads 10 degrees Celsius lower that it should, what effect will that have...
If my thermometer reads 10 degrees Celsius lower that it should, what effect will that have on my calculation of the specific heat of metal?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT