PROJECT 4 : DESIGN A HYDRAULIC MOBILE CRANE REQUIREMENTS: •Design the system to carry load of...

PROJECT

4 : DESIGN A HYDRAULIC MOBILE CRANE

REQUIREMENTS:

•Design the system to carry load of up to 5000 lb

•Use a hydraulic winch(rotary actuator)to move the pulleys up and down

•Use fail-safe measures to support positive loads and run-away issues

•The speed of the crane shouldbe changeable

•Use dampeners to prevent vibration and maintain pressure and flow where necessar

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

How are the requirements for a design project developed?

2. Design an all-bolted double-angle connection for a W24x146 A992 beam to carry a dead load...

2. Design an all-bolted double-angle connection for a W24x146 A992 beam to carry a dead load reaction of 25 kips and a live load reaction of 75 kips. Use 5/16 in. angles and ¾ in A325N bolts in standard holes. The uncoped beam is connected to the flange of a W14x132 column. Design by both LRFD and ASD method.

SYSTEM VERILOG: Using your preferred HDL program, design a complete 4-bit Carry Look Ahead (CLA) adder...

SYSTEM VERILOG: Using your preferred HDL program, design a complete 4-bit Carry Look Ahead (CLA) adder module.

Design a network with the following requirements: - 4 LANS separated by a WAN - Utilize...

Design a network with the following requirements: - 4 LANS separated by a WAN - Utilize any Class C address; any routing protocol -Implement the following: In Router 0, 1. Banner 2. Time-out 3. Block Log in 4. Telnet In Router 1: 1. Privilege Level 15 for User1 2. Privilege level 3 for User 2 3. SSH

Design a spreadsheet to calculate the class’s grades. Consider the following requirements: Each project will be...

Design a spreadsheet to calculate the class’s grades. Consider the following requirements: Each project will be graded from 0 to 10. the contribution of each grade to the final grade are ( 7 team work assignments 10%, Project 1,2,3,4= 20%, mid term 35%, final 35%.) The final test will be graded from 0 to 100, but your solution should allow different grades (i.e 80 points, 90, or 95). This flexibility is very important. Program your solution to set a numeric...

Explain the basic requirements of security in WSN system. You are required to design your own...

Explain the basic requirements of security in WSN system. You are required to design your own security protocol with start byte, stop byte, payload along with security codes in your WSN based project. You are asked to send the data 3A20F14B. Select the security bytes and provide necessary explanation.

The list of ALL nonfunctional requirements and ALL design constraints for the system? nonfunctional requirement based...

The list of ALL nonfunctional requirements and ALL design constraints for the system? nonfunctional requirement based on :Performance ,Reliability, Availability, Security,Maintainability and Portability Payroll Management System As the head of Information Technology at Mena, Inc., you are tasked with building a new payroll management system to replace the existing system which is hopelessly out of date. Mena needs a new system to allow employees to record timecard information electronically and automatically generate paychecks based on the number of hours worked...

I need al functional and non functional requirements and design constraints for this system: Payroll Management...

I need al functional and non functional requirements and design constraints for this system: Payroll Management System As the head of Information Technology at Mena, Inc., you are tasked with building a new payroll management system to replace the existing system which is hopelessly out of date. Mena needs a new system to allow employees to record timecard information electronically and automatically generate paychecks based on the number of hours worked and total amount of sales (for commissioned employees). The...

Design a system which can add two 2-digit binary numbers (no carry in). Use a truth...

Design a system which can add two 2-digit binary numbers (no carry in). Use a truth table approach and use karnaugh-map Write a Boolean equation for each output and draw circuit.

A system consists of 4 identical 250MVA generators feeding a load of 510MW. The inertia constant...

A system consists of 4 identical 250MVA generators feeding a load of 510MW. The inertia constant H of each unit is 2.5 on the machine base. The total load varies at 1.4% for a 1% change in frequency. If there is a drop in load of 10MW, determine the system block diagram expressing H and D on a base of 1000MVA. Give expression for the speed deviation, assuming there is no speed governor.

Subjects