Question

In: Civil Engineering

2. Design an all-bolted double-angle connection for a W24x146 A992 beam to carry a dead load...

2. Design an all-bolted double-angle connection for a W24x146 A992 beam to carry a dead load reaction of 25 kips and a live load reaction of 75 kips. Use 5/16 in. angles and ¾ in A325N bolts in standard holes. The uncoped beam is connected to the flange of a W14x132 column. Design by both LRFD and ASD method.

Solutions

Expert Solution

Ally Wells answered 2 months ago
Next > < Previous

Related Solutions

Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of...
Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of 1 kip/ft, a uniformly distributed live load of 1 kip/ft, and a concentrated dead load of 8.4 kips a distance of 5 ft from one support Show all the steps. (LRFD) Fy = 50k/in2    E = 29,000k/in2
The service load bending moments on a beam are 128 kip-ft for dead load and 107...
The service load bending moments on a beam are 128 kip-ft for dead load and 107 kip-ft for live load. The beam is 12 in. wide, f’c is 3000 psi and fy is 60 ksi. Determine Mu, Mt, p, R, the depth of the beam and the As of tensile reinforcing required. How many no. 8 bars or No. 10 bars would have the required As?
A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load...
A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load and live load). The beam has an overall depth of 600 mm including slab thickness of 100 mm. The width of the beam is 230 mm, effective span of the beam is 6.25 m and effective cover to the tension reinforcement is 50 mm. Assume M25 grade concrete and Fe415 steel. Check whether the beam needs to be designed as singly reinforced or doubly...
Select a 12 ft cantilever beam with p = 0.012, to support a dead load of...
Select a 12 ft cantilever beam with p = 0.012, to support a dead load of 2k/f (including self weight) and Live load of 3 k/ft. fy= 60000 psi, fc'= 3500 psi (hint your answer should be Width = XXXX, Effective depth= XXXXX, Area of reinforcement = XXXXX)
Q.2. Design a square footing for a 16-in. square interior column with an ultimate dead load...
Q.2. Design a square footing for a 16-in. square interior column with an ultimate dead load = W1 (k) and an ultimate live load = W2 (k). Take fy=60,000 psi, fc=4000 psi, normal weight, and qa= (w) psf. Assume the base of the footing is h (ft.) below grade. Draw the reinforcement detail also. Check for one way and two way shears with the support of diagram.                                                                                                       Student shall take the data given below in the table against...
Determine the lightest section W14 available to carry a service dead load of 150 kips and...
Determine the lightest section W14 available to carry a service dead load of 150 kips and a service live load of 250 kips. The effective length of the column about both axes is 15 ft. Use A992 steel. (10 points)
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft plus self weight and service live load of 2.0 k/ft, with a 30 -ft simple span. Material strength will be fy = 60 ksi and fc = 5 ksi for steel and normal weight concrete respectively. Start the design of the beam dimensions using the rules of thumbs in class. The total beam depth, h, must not exceed twice the width. Calculate the required...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft...
A Simply supported rectangular, tension-reinforced beam is to be designed for dead load of 0.75 k/ft plus self weight and service live load of 2.0 k/ft, with a 30 -ft simple span. Material strength will be fy = 60 ksi and fc = 5 ksi for steel and normal weight oncrete respectively. Startthe design of the beam dimensions using the rules of thumbs in class. The total beam depth, h, must not exceed twice the width. Calculate the required beam...
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft...
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft plus the beam self-weight and a uniform live load of 3.3 kips/ft. The lateral supports are located at the supports and at the midpoint of the span. Determine the leastweight W-shape to carry the load. Use A992 steel and Cb= 1.0. Design by (a) LRFD and (b) ASD. [6.16-36]
A simply supported beam 10-m long is acted upon by a uniformly distributed dead load of...
A simply supported beam 10-m long is acted upon by a uniformly distributed dead load of 20 kN/m and a uniformly distributed live load of 48 kN/m throughout its span. Design the footings of each columns located at the supports using the following data Depth of Footing (Df)                                                   =             1.20 meters Allowable Soil Pressure (qall)                                      =             210 kPa Unit Weight of Soil (γs)                                                =             17 kN/m3 Unit Weight of Concrete (γc)                                      =             24 kN/m3 Design Compressive Strength of Concrete (f’c)     =             27.6 MPa Yield Strength of Reinforcing Steel (fy)                    =             276 MPa...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT