SLIDING OSCILLATIONS 3 My Notes A block weighing 273 g slides along a frictionless track at...

SLIDING OSCILLATIONS 3 My Notes A block weighing 273 g slides along a frictionless track at a speed 8.9 cm/s. It then attaches to a spring-bumper with an electromagnetic device so that the block attaches to the bumper. The bumper has a mass of 115 g, and the spring has a stiffness of 1110 kg/s2 and an equilibrium length of 9.5 cm. After the spring compresses and returns to its original length, the magnet turns off and the block launches off again, conserving energy. (a) How fast is the block just after it attaches to the paddle? (b) What is the maximum compression of the spring before the block turns around? (b) How fast is the block moving after it launches off the paddle?

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A block of mass ? slides along a frictionless surface with a speed ? and collides...

A block of mass ? slides along a frictionless surface with a speed ? and collides with a stationary block of mass 2? . After the collision the block of mass ? rebounds with a speed of ?⁄2. What is the greatest speed ???? that the block of mass 2? can have after the collision?

A.) A small block slides down a frictionless track whose shape is described by y =...

A.) A small block slides down a frictionless track whose shape is described by y = (x^2) /d for x<0 and by y = -(x^2)/d for x>0. The value of d is 3.27 m, and x and y are measured in meters as usual. Suppose the block starts from rest on the track, at x = -1.07 m. What will the block s speed be when it reaches x = 0? B.) Same type of track as in the previous...

A block sliding with velocity v>0 along a frictionless floor hits a spring at time...

A block sliding with velocity v>0 along a frictionless floor hits a spring at time t=0 (configuration 1). The spring compresses until the block comes to a momentary stop (configuration 2).(Figure 1)Finally, the spring expands, pushing the block back in the direction from which it came. In this problem you will be shown a series of plots related to the motion of the block and spring, and you will be asked to identify what the plots represent. In each...

Two blocks are free to slide along the frictionless wooden track shown below. The block of...

Two blocks are free to slide along the frictionless wooden track shown below. The block of mass m1 = 5.07 kg is released from the position shown, at height h = 5.00 m above the flat part of the track. Protruding from its front end is the north pole of a strong magnet, which repels the north pole of an identical magnet embedded in the back end of the block of mass m2 = 10.3 kg, initially at rest. The...

In the figure, block 1 of mass m1 slides from rest along a frictionless ramp from...

In the figure, block 1 of mass m1 slides from rest along a frictionless ramp from height h = 2.2 m and then collides with stationary block 2, which has mass m2 = 4m1. After the collision, block 2 slides into a region where the coefficient of kinetic friction μk is 0.55 and comes to a stop in distance d within that region. What is the value of distance d if the collision is (a) elastic and (b) completely inelastic?

In the figure, block 1 of mass m1 slides from rest along a frictionless ramp from...

In the figure, block 1 of mass m1 slides from rest along a frictionless ramp from height h = 3.3 m and then collides with stationary block 2, which has mass m2 = 5m1. After the collision, block 2 slides into a region where the coefficient of kinetic friction μk is 0.2 and comes to a stop in distance d within that region. What is the value of distance d if the collision is (a) elastic and (b) completely inelastic?

Block 1 of mass m1 slides along a frictionless floor and into a one-dimensional elastic collision...

Block 1 of mass m1 slides along a frictionless floor and into a one-dimensional elastic collision with stationary block 2 of mass m2 = 5m1. Prior to the collision, the center of mass of the two-block system had a speed of 8.40 m/s. a) what is the speed of the center of mass after the collision? b)What is the speed if the block 2 after the collisions?

An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block...

An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block at rest on the sloping surface, held in place by static friction through the horizontal acceleration of the system. The coefficient of static friction between the block and the inclined plane is 0.615. The slope of the incline plane is 40.5 degrees with respect to the horizontal. What is minimum acceleration of the inclined plane for the square block not to slide? What is...

An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block...

An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block at rest on the sloping surface, held in place by a static friction through the horizontal acceleration of the system. the coefficient of static friction between the block and the inclined plane is 0.615. the slope of the incline plane is 42.5 degrees with respect to the horizontal. a) What is the minumum acceleration of the inclined plane for the square block not to...

In Figure 9-69, block 1 of mass m1 slides from rest along a frictionless ramp from...

In Figure 9-69, block 1 of mass m1 slides from rest along a frictionless ramp from height h and then collides with stationary block 2, which has mass m2 = 3m1. After the collision, block 2 slides into a region where the coefficient of kinetic friction is μk and comes to a stop in distance d within that region. What is the value of distance d if the collision is (a) elastic and (b) completely inelastic? Express your answer in...

Subjects