for low pressure effusion of gases how do I calculate area of pinhole and pinhole diameter?...

for low pressure effusion of gases

how do I calculate area of pinhole and pinhole diameter?

ln(P/P₀) = -Ct

dP/P = - (A/V)(RT/2πM)^1/2 dt = -C dt

(volume= 285cm³, T= 298.15K)

I got relaxation constant 0.01049 microns/second = C

This is for N2 ( nitrogen)

How do i solve A (pinhole are)?

Expert Solution

queen_honey_blossom answered 2 years ago

For a laboratory experiment on effusion and low pressure Gas flow, with the goals of measuring...

For a laboratory experiment on effusion and low pressure Gas flow, with the goals of measuring the rate of effusion through small apertures, determining average velocities of gases and examine the flow of gas in through a pipe at low pressures , in the viscous and molecular flow. What are the error sources and possible improvements when undertaking the laboratory protocol?

The gases behave as ideal at low pressure, however, at high pressure they deviate from the...

The gases behave as ideal at low pressure, however, at high pressure they deviate from the ideal behavior. Compare the input power required(in kW)for compressing oxygen gas by first assuming ideal behavior then the real behavior. Take inlet state at 10 MPa, 14°C and the final state after compression is 15 MPa, 127°C. You can ignore the effect of gravity and motion of the system.Assume mass flow rate of the gas as 9 kg/min

Explain how the kinetic theory of gases can be applied to measure effusion rates?

At high pressures, real gases do not behave ideally. Calculate the pressure exerted by 27.0 g...

At high pressures, real gases do not behave ideally. Calculate the pressure exerted by 27.0 g H2 at 20.0°C in a 1.00 L container assuming in Part 1 non-ideal behavior and in Part 2 ideal behavior.

At high pressures, real gases do not behave ideally. Calculate the pressure exerted by 33.0 g...

At high pressures, real gases do not behave ideally. Calculate the pressure exerted by 33.0 g H2 at 20.0°C in a 1.00 L container assuming in Part 1 non-ideal behavior and in Part 2 ideal behavior. Part 1)Use the van der Waals equation and data in the hint to calculate the pressure exerted= ____atm Part 2)Now, calculate the pressue excerted assuming that the gas behaves as an ideal gas.= _____ atm

How do I calculate the volume of a cylinder if the surface of the cylinder is 4239 cm². And the height is equal to the diameter of the base.

How is hydrostatic pressure altered when blood pressure is low?

Question

for low pressure effusion of gases how do I calculate area of pinhole and pinhole diameter?...

Solutions

Expert Solution

Related Solutions