Question

In: Accounting

Problem 4-16 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] [The following information applies to...

Problem 4-16 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4]

[The following information applies to the questions displayed below.]

For many years, Thomson Company manufactured a single product called LEC 40. Then three years ago, the company automated a portion of its plant and at the same time introduced a second product called LEC 90 that has become increasingly popular. The LEC 90 is a more complex product, requiring 0.60 hours of direct labor time per unit to manufacture and extensive machining in the automated portion of the plant. The LEC 40 requires only 0.20 hours of direct labor time per unit and only a small amount of machining. Manufacturing overhead costs are currently assigned to products on the basis of direct labor-hours.

Despite the growing popularity of the company’s new LEC 90, profits have been declining steadily. Management is beginning to believe that there may be a problem with the company’s costing system. Direct material and direct labor costs per unit are as follows:

LEC 40 LEC 90
Direct materials $ 20.00 $ 48.00
Direct labor (0.20 hours and 0.60 hours @ $15.00 per hour) $ 3.00 $ 9.00

Management estimates that the company will incur $872,000 in manufacturing overhead costs during the current year and 80,000 units of the LEC 40 and 40,000 units of the LEC 90 will be produced and sold.

Problem 4-16 Part 1

Required:

1-a. Compute the predetermined overhead rate assuming that the company continues to apply manufacturing overhead cost on the basis of direct labor-hours.

1-b. Using this rate and other data from the problem, determine the unit product cost of each product.

Problem 4-16 Part 2

2. Management is considering using activity-based costing to assign manufacturing overhead cost to products. The activity-based costing system would have the following four activity cost pools:

Activity Cost Pool Activity Measure Estimated Overhead Cost
Maintaining parts inventory Number of part types $ 314,500
Processing purchase orders Number of purchase orders 120,000
Quality control Number of tests run 29,000
Machine-related Machine-hours 408,500
$ 872,000
Expected Activity
Activity Measure LEC 40 LEC 90 Total
Number of part types 650 1,200 1,850
Number of purchase orders 1,500 500 2,000
Number of tests run 1,200 1,700 2,900
Machine-hours 6,000 4,000 10,000

Determine the activity rate for each of the four activity cost pools. (Round your answers to 2 decimal places.)

Problem 4-16 Part 3
3. Using the activity rates you computed in part (2), do the following:

a. Determine the per unit amount of manufacturing overhead cost that would be assigned to each product using the activity-based costing system.

b. Compute the unit product cost of each product.

Solutions

Expert Solution


Related Solutions

Problem 4-15 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Marine, Inc., manufactures a product...
Problem 4-15 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Marine, Inc., manufactures a product that is available in both a flexible and a rigid model. The company has made the rigid model for years; the flexible model was introduced several years ago to tap a new segment of the market. Since introduction of the flexible model, the company’s profits have steadily declined, and management has become concerned about the accuracy of its costing system. Sales of the flexible...
Exercise 4-10 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Rocky Mountain Corporation makes two...
Exercise 4-10 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Rocky Mountain Corporation makes two types of hiking boots—Xactive and Pathbreaker. Data concerning these two product lines appear below: Xactive Pathbreaker Direct materials per unit $ 65.60 $ 51.80 Direct labor cost per unit $ 19.00 $ 13.80 Direct labor-hours per unit 1.4 DLHs 1 DLHs Estimated annual production and sales 33,000 units 83,000 units The company has a conventional costing system in which manufacturing overhead is applied to...
Exercise 4-10 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Rocky Mountain Corporation makes two...
Exercise 4-10 Contrasting ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Rocky Mountain Corporation makes two types of hiking boots—Xactive and Pathbreaker. Data concerning these two product lines appear below: Xactive Pathbreaker Direct materials per unit $ 64.50 $ 50.70 Direct labor cost per unit $ 17.90 $ 12.70 Direct labor-hours per unit 1.4 DLHs 1 DLHs Estimated annual production and sales 22,000 units 72,000 units The company has a conventional costing system in which manufacturing overhead is applied to...
Exercise 4-7 Contrast ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Kunkel Company makes two products...
Exercise 4-7 Contrast ABC and Conventional Product Costs [LO4-2, LO4-3, LO4-4] Kunkel Company makes two products and uses a conventional costing system in which a single plantwide predetermined overhead rate is computed based on direct labor-hours. Data for the two products for the upcoming year follow: Mercon Wurcon Direct materials cost per unit $ 9.00 $ 7.00 Direct labor cost per unit $ 15.00 $ 17.00 Direct labor-hours per unit 0.40 4.80 Number of units produced 4,000 8,000 These products...
Exercise 3-10 Contrasting ABC and Conventional Product Costs [LO3-2, LO3-3, LO3-4] Rocky Mountain Corporation makes two...
Exercise 3-10 Contrasting ABC and Conventional Product Costs [LO3-2, LO3-3, LO3-4] Rocky Mountain Corporation makes two types of hiking boots—Xactive and Pathbreaker. Data concerning these two product lines appear below: Xactive Pathbreaker   Direct materials per unit $ 65.20 $ 51.40   Direct labor cost per unit $ 18.60 $ 13.40   Direct labor-hours per unit 1.4 DLHs 1 DLHs   Estimated annual production and sales 29,000 units 79,000 units The company has a conventional costing system in which manufacturing overhead is applied to...
Problem 4-16 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses the weighted-average method...
Problem 4-16 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses the weighted-average method in its process costing system. It manufactures a caulking compound that goes through three processing stages prior to completion. Information on work in the first department, Cooking, is given below for May: Production data: Pounds in process, May 1; materials 100% complete; conversion 90% complete 79,000 Pounds started into production during May 440,000 Pounds completed and transferred out ? Pounds in process, May 31;...
Problem 4-16 (Algo) Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses the weighted-average...
Problem 4-16 (Algo) Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses the weighted-average method in its process costing system. It manufactures a caulking compound that goes through three processing stages prior to completion. Information on work in the first department, Cooking, is given below for May: Production data: Pounds in process, May 1; materials 100% complete; conversion 90% complete 85,000 Pounds started into production during May 500,000 Pounds completed and transferred out ? Pounds in process, May...
SHOW WORK PLEASE Problem 4-16 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses...
SHOW WORK PLEASE Problem 4-16 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Builder Products, Inc., uses the weighted-average method in its process costing system. It manufactures a caulking compound that goes through three processing stages prior to completion. Information on work in the first department, Cooking, is given below for May: Production data: Pounds in process, May 1; materials 100% complete; conversion 90% complete 76,000 Pounds started into production during May 410,000 Pounds completed and transferred out ? Pounds in...
Problem 4-14 Compute and Use Activity Rates to Determine the Costs of Serving Customers [LO4-2, LO4-3,...
Problem 4-14 Compute and Use Activity Rates to Determine the Costs of Serving Customers [LO4-2, LO4-3, LO4-4] Gino’s Restaurant is a popular restaurant in Boston, Massachusetts. The owner of the restaurant has been trying to better understand costs at the restaurant and has hired a student intern to conduct an activity-based costing study. The intern, in consultation with the owner, identified the following major activities: Activity Cost Pool Activity Measure Serving a party of diners Number of parties served Serving...
Problem 4-15 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Sunspot Beverages, Ltd., of Fiji uses the...
Problem 4-15 Comprehensive Problem-Weighted-Average Method [LO4-2, LO4-3, LO4-4, LO4-5] Sunspot Beverages, Ltd., of Fiji uses the weighted-average method in its process costing system. It makes blended tropical fruit drinks in two stages. Fruit juices are extracted from fresh fruits and then blended in the Blending Department. The blended juices are then bottled and packed for shipping in the Bottling Department. The following information pertains to the operations of the Blending Department for June. Percent Completed Units Materials Conversion Work in...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT