Question

In: Physics

4.22 mode-locked laser (a)consider a He-Ne laser emitting at 632.8nm, and mode-locked. the tube length is...

4.22 mode-locked laser (a)consider a He-Ne laser emitting at 632.8nm, and mode-locked. the tube length is 50cm. the spectral with of the optical gain curve is 1.5 GHz Find the mode-locked pulse width and the repetition rate. what is the seperation of pulses in space? (b) consider a Nd^3+ glass laser that is mode-locked. The emission wavelength is 1060 nm and the spectral width of the optical gain curve is 7THz. the refractive index of the laser medium is 1.45. find the mode-locked pulse width and the repetition rate . if the Nd^3+ glass rod is 10cm long, what is the seperation of pules in space?

Solutions

Expert Solution

genius_generous answered 1 year ago
Next > < Previous

Related Solutions

A scanning Fabry-Perot etalon to be used in studying mode structure of a He-Ne laser with...
A scanning Fabry-Perot etalon to be used in studying mode structure of a He-Ne laser with the following characteristics: llaser = 110 cm, spacing between longitudinal modes is 1.7x109 Hz, and the full width half maximum is 1.7x107 Hz. What will be the length, finesse, and mirror reflectivity of the resonator? Assume that both mirrors have same reflectivity.
Summarize the conditions of Laser operation and explain shortly the essentials of He-Ne laser operation.
Summarize the conditions of Laser operation and explain shortly the essentials of He-Ne laser operation.
A Ti-doped sapphire laser emits at 800 nm and is mode-locked. It consists of a Ti-sapphire...
A Ti-doped sapphire laser emits at 800 nm and is mode-locked. It consists of a Ti-sapphire rod with refractive index 1.4 that is 10 cm long within a cavity that is 2 m in length (the laser pulses propagate in air except when passing through the rod). You can neglect the reflectivity of the rod surfaces, assuming they are coated with perfect anti-reflective coatings. The spectral width of the laser is 200 THz. What is the resulting pulse width, pulse...
1) Summarize the conditions of Laser operation and explain shortly the essentials of He-Ne laser operation....
1) Summarize the conditions of Laser operation and explain shortly the essentials of He-Ne laser operation. 2) A laser diode has dielectric constant of ε = 4εo and has a cavity length 1-mm long with one perfect mirror and one mirror with a power reflection coefficient of 0.99. It operates at wavelength of 1-micron with linewidth of 0.1 percent associated with the width of the energy levels involved. (a) What is the frequency spacing (Hz) between resonances for this laser...
In a He-Ne laser system the starting intensity is 0.1 picowatts with a gain coefficient of...
In a He-Ne laser system the starting intensity is 0.1 picowatts with a gain coefficient of 0.1 (1/cm). If R1 = .98 and R2 = .99, with a cavity length of 50 cm, what is the intensity of the beam inside AND outside the cavity after five round trips? Assume the starting beam is from the second mirror R2, and that there is no saturation mechanism involved.
In a He-Ne laser system the starting intensity is 0.1 picowatts with a gain coefficient of...
In a He-Ne laser system the starting intensity is 0.1 picowatts with a gain coefficient of 0.1 (1/cm). If R1 = .98 and R2 = .99, with a cavity length of 50 cm, what is the intensity of the beam inside AND outside the cavity after five round trips? Assume the starting beam is from the second mirror R2, and that there is no saturation mechanism involved.
A sound wave is oscillating in the n=7 mode in a tube of length 3.25 m....
A sound wave is oscillating in the n=7 mode in a tube of length 3.25 m. What is the wavelength and frequency of the standing sound wave in the tube if the speed of sound is 340 m/s and: a) The tube is open at both ends. b) The tube is closed at both ends. c) One end of the tube is open and the other end is closed.
Two thin slits separated by 0.0880 mm are illuminated by light from a He-Ne laser (?...
Two thin slits separated by 0.0880 mm are illuminated by light from a He-Ne laser (? = 633 nm), producing interference fringes on a distant screen. Find the angle between the centers of the central bright fringe and the next bright fringe.
Consider a 9 mm diameter circular tube, calculate the length of tube that is required to...
Consider a 9 mm diameter circular tube, calculate the length of tube that is required to transfer 100 W of water that circulates through the tube at a rate of 0.08 kg / s. The temperature of the water is kept constant at 50 ° C and the wall of the tube is maintained at 45 ° C.
Light from a He-Ne laser (wavelength 633nm) passes through a single slit of width 25μm. At...
Light from a He-Ne laser (wavelength 633nm) passes through a single slit of width 25μm. At the screen a distance away, the intensity at the center of the central maxima is 8.25 W/m^2. a. Draw a clear diagram showing the slit and the intensity pattern seen on the screen. Label key quantities and key features. b. Find the maximum number of totally dark fringes (minima) seen on the screen. c. At what angle does the dark fringe (minima) that is...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT