Q 1. (25 pts) A constant pressure container is filled with 1 kg of stainless steel...

Q 1. (25 pts) A constant pressure container is filled with 1 kg of stainless steel and 0.5 kg of PVC (polyvinyl chloride) both at 20C and 0.25 kg of hot air at 500 K, 100 kPa. The container is now left alone with no external heat transfer.
a. Find the final temperature.
b. Find the process work.

pls sol 20 minute

Expert Solution

genius_generous answered 1 year ago

1. As a demonstration of lab safety violations, a stainless steel water bottle is filled with...

1. As a demonstration of lab safety violations, a stainless steel water bottle is filled with a small amount of liquid nitrogen, and then the cap is sealed on the bottle (don’t ever do this – you could get seriously hurt). The bottle is laid on its side on the edge of the roof of the library building, which is 14 meters above the street below. When the bottle explodes, the 240 gram bottle flies back onto the roof and...

Chap 6 4. A 31.15−g stainless steel ball bearing at 103.27°C is placed in a constant-pressure...

Chap 6 4. A 31.15−g stainless steel ball bearing at 103.27°C is placed in a constant-pressure calorimeter containing 116.9 g of water at 22.87°C. If the specific heat of the ball bearing is 0.474 J / (g · °C), calculate the final temperature of both the water and steel when they equilibrate. Assume the calorimeter to have negligible heat capacity.

Reacting chemicals are stored in a spherical stainless steel container of outer radius ro = 6...

Reacting chemicals are stored in a spherical stainless steel container of outer radius ro = 6 cm and of inner radius is 5 cm. The chemicals generate a uniform heat at a constant rate of ???? ̇ = 8 × 107 W m3 ⁄ . The outer surface of the container is maintained at a uniform temperature of 100 °C. Consider a steady one-dimensional heat transfer and a. Write an appropriate form of heat conduction equation for the sphere. b....

A stainless steel ball (? = 8055 kg/m3 , CP = 480 J/Kg? K ) of...

A stainless steel ball (? = 8055 kg/m3 , CP = 480 J/Kg? K ) of diameter D = 15cm is removed from the oven at a uniform temperature of 350 Degrees C. The ball is then subjected to the flow of air at 1 atm pressure and 30 degrees C with a velocity of 6m/s. The surface temperature of the ball eventually drops to 250 degrees 250 degrees C. Determine the average convection heat transfer coefficient during this cooling...

A 2.50 L container is filled with gaseous H2S at 13.0ºC and a pressure of 169.1...

A 2.50 L container is filled with gaseous H2S at 13.0ºC and a pressure of 169.1 torr. Then 200.0 mL of water is added to the container (without allowing any of the H2S to escape). A small amount of H2S dissolves in the water. When the system has reached equilibrium, the gas pressure in the container is 155.9 torr and the temperature is still 13.0ºC. The vapor pressure of water at this temperature is 11.2 torr. What is the molar...

1) The pressure inside a hydrogen-filled container was 2.10 atm at 21 ∘C. What would the...

1) The pressure inside a hydrogen-filled container was 2.10 atm at 21 ∘C. What would the pressure be if the container was heated to 87 ∘C ? 2) At standard temperature and pressure (0 ∘C and 1.00 atm ), 1.00 mol of an ideal gas occupies a volume of 22.4 L. What volume would the same amount of gas occupy at the same pressure and 70 ∘C ?

A gas-filled container, equipped with a pressure gauge, was placed on a cold winter morning in...

A gas-filled container, equipped with a pressure gauge, was placed on a cold winter morning in a throttle. After stabilizing the pressure gauge, the absolute pressure of the gas was read to 0.15 MPa. Then the equipment was placed indoors and the container was immersed in a pot of boiling water. The gas pressure was now read to 0.21 MPa. What temperature prevailed in the snow?

A stainless steel sphere drops through a graduated cylinder filled .245 meters high with water knowing...

A stainless steel sphere drops through a graduated cylinder filled .245 meters high with water knowing that the mass of the ball is 028236 kg, it took .175 seconds to reach the bottom, and its radius is 0.00955 meters Find the drag force acting

PART A A cylinder, with a piston pressing down with a constant pressure, is filled with...

PART A A cylinder, with a piston pressing down with a constant pressure, is filled with 1.90 moles of a gas (n1), and its volume is 40.0 L (V1). If 0.600 mole of gas leak out, and the pressure and temperature remain the same, what is the final volume of the gas inside the cylinder? Express your answer with the appropriate units. PART B A sample of gas in a cylinder as in the example in Part A has an...

Each front tire of a vehicle is supposed to be filled to a pressure of 25...

Each front tire of a vehicle is supposed to be filled to a pressure of 25 psi (pounds per square inch). Suppose that X and Y are random variables giving the actual air pressure on the right and left tires, respectively. Suppose the joint pdf is given by f(x,y)=K(x^2+y^2) for x and y between 20 and 30. Calculate the value K must have for this to be a pdf. Calculate the probability that both tires are underfilled with air....

Question