Chap 6 4. A 31.15−g stainless steel ball bearing at 103.27°C is placed in a constant-pressure...

Chap 6

4. A 31.15−g stainless steel ball bearing at 103.27°C is placed in a constant-pressure calorimeter containing 116.9 g of water at 22.87°C. If the specific heat of the ball bearing is 0.474 J / (g · °C), calculate the final temperature of both the water and steel when they equilibrate. Assume the calorimeter to have negligible heat capacity.

Expert Solution

queen_honey_blossom answered 2 years ago

For a ball bearing made out of plastic inner and outer race and a stainless steel...

For a ball bearing made out of plastic inner and outer race and a stainless steel ball, which of these materials is likely to wear? What would the wear pattern be like? Which will eventually fail first?

Q 1. (25 pts) A constant pressure container is filled with 1 kg of stainless steel...

Q 1. (25 pts) A constant pressure container is filled with 1 kg of stainless steel and 0.5 kg of PVC (polyvinyl chloride) both at 20C and 0.25 kg of hot air at 500 K, 100 kPa. The container is now left alone with no external heat transfer. a. Find the final temperature. b. Find the process work. pls sol 20 minute

1. A 48.0−g sample of an unknown metal at 99°C was placed in a constant-pressure calorimeter...

1. A 48.0−g sample of an unknown metal at 99°C was placed in a constant-pressure calorimeter containing 70.0 g of water at 24.0°C. The final temperature of the system was found to be 28.4°C. Calculate the specific heat of the metal. (The heat capacity of the calorimeter is 10.4 J/°C.) 2.A balloon 19.0 m in diameter is inflated with helium at 23°C. Calculate the work done (in kJ) during the inflation process if the atmospheric pressure is 97.7 kPa. 3.Ice...

A spherical steel ball bearing has a diameter of 2.540 cm at 29.00°C. (Assume the coefficient...

A spherical steel ball bearing has a diameter of 2.540 cm at 29.00°C. (Assume the coefficient of linear expansion for steel is 11 ✕ 10−6 (°C)−1. ) (a) What is its diameter when its temperature is raised to 96.0°C? (Give your answer to at least four significant figures.) cm (b) What temperature change is required to increase its volume by 0.800%?

You drop a steel ball bearing, with a radius of 3.40 mm, into a beaker of...

You drop a steel ball bearing, with a radius of 3.40 mm, into a beaker of honey. Note that honey has a viscosity of 6.00 Pa/s and a density of 1360 kg/m3, and steel has a density of 7800 kg/m3. Assume that g = 9.8 m/s2. (a) What is the terminal speed of the ball bearing? m/s (b) Aluminum has a density of 2700 kg/m3. What radius should an aluminum ball have to have the same terminal speed in honey...

A stainless steel ball (? = 8055 kg/m3 , CP = 480 J/Kg? K ) of...

A stainless steel ball (? = 8055 kg/m3 , CP = 480 J/Kg? K ) of diameter D = 15cm is removed from the oven at a uniform temperature of 350 Degrees C. The ball is then subjected to the flow of air at 1 atm pressure and 30 degrees C with a velocity of 6m/s. The surface temperature of the ball eventually drops to 250 degrees 250 degrees C. Determine the average convection heat transfer coefficient during this cooling...

A stainless steel alloy is to be analyzed for its chromium content. A 3.00 g sample...

A stainless steel alloy is to be analyzed for its chromium content. A 3.00 g sample of the steel is used to produce 250.0 mL of a solution containing Cr2O72−. A 10.0-mL portion of this solution is added to BaCl2(aq). When the pH of the solution is properly adjusted, 0.145 g BaCrO4(s)precipitates. What is the percent Cr, by mass, in the steel sample?

A sample of stainless steel was stored in a freezer with a temperature of -4.0°C. After...

A sample of stainless steel was stored in a freezer with a temperature of -4.0°C. After removing it from the freezer, the aluminum is placed in 1982 mL of water at room temperature (25.0°C). After several minutes thermal equilibrium is achieved at 21.4°C. What is the mass of the stainless steel sample? Please show all work with appropriate units.

Consider the process A(l) → A(g) 70.°C 156°C which is carried out at constant pressure. The...

Consider the process A(l) → A(g) 70.°C 156°C which is carried out at constant pressure. The total ΔS for this process is known to be 75.0 J K−1 mol−1. For A(l) and A(g), the Cp values are 75.0 J K−1 mol−1 and 29.0 J K−1 mol−1, respectively, and are not dependent on temperature. Calculate ΔHvaporization for A(l) at 125°C (its boiling point).

Reacting chemicals are stored in a spherical stainless steel container of outer radius ro = 6...

Reacting chemicals are stored in a spherical stainless steel container of outer radius ro = 6 cm and of inner radius is 5 cm. The chemicals generate a uniform heat at a constant rate of ???? ̇ = 8 × 107 W m3 ⁄ . The outer surface of the container is maintained at a uniform temperature of 100 °C. Consider a steady one-dimensional heat transfer and a. Write an appropriate form of heat conduction equation for the sphere. b....

Question