Question

In: Physics

5 kg of saturated water mixture in a rigid container initially at the standard pressure (state...

5 kg of saturated water mixture in a rigid container initially at the standard pressure (state 1) is heated at constant volumeto a pressure of 35 MPa (state 2). This heating is performed in such a way that the process passes through the critical point of the water:

a) What is the volume in m3 occupied by the vapor phase and the liquid phase of the mixture at the initial condition (state 1)?
b) Determine the change in internal energy between the initial state and final state of the process.

The standard pressure is 101.325 kPa.

Solutions

Expert Solution

Please let me know if i missed something and I will correct it promptly. Thanks.


Related Solutions

A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume...
A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume of the tank is 110 m3 and the temperature of the water in the tank is 115°C. In the tank, 70% of the mass is liquid and 30% of the mass is vapour. Please calculate the total mass of water in the tank.
A mass of 5 kg of saturated liquid vapor mixture of water is contained in a...
A mass of 5 kg of saturated liquid vapor mixture of water is contained in a piston cylinder device at 100 kPa, initially 2 kg of water is in the liquid phase and the rest is in the vapor phase.Heat is now transferred to the water and the piston which is resting on a set of stops, starts moving when the pressure in side reaches 200 kPa, heat transfer continues until the total volume increases by 20%, determine a. the...
A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three...
A well-insulated rigid tank contains 3kg of saturated liquid vapour-mixture of water at 250kpa. Initially, three quarters of the mass is in the liquid phase. An electric resistance heater placed in the tank is turned on and kept on until all the liquid in the tank is vaporizer. Assuming the surroundings to be 25 degrees Celsius and 100kpa Determine: a) The exergy destruction and b) The second law efficiency for the process.
A rigid 0.1 m3 container holds 1 kg of water, initially at 25?C. Calculate the theoretical...
A rigid 0.1 m3 container holds 1 kg of water, initially at 25?C. Calculate the theoretical minimum work required to increase the water temperature to the point where the water exists as a single phase. The environment temperature is 25?C.
An adiabatic rigid container, holding water initially at 100 kPa and 20oC, receives 209kJ/kg of paddle...
An adiabatic rigid container, holding water initially at 100 kPa and 20oC, receives 209kJ/kg of paddle work. Determine the final temperature.
A mass of m=1kg of steam is contained in a closed rigid container. Initially the pressure...
A mass of m=1kg of steam is contained in a closed rigid container. Initially the pressure and temperature of the steam are: p1= 1.5 MPa and t1=240?C, respectively. Then the temperature drops to T2 =100?C as the result of heat transfer to the surroundings. Determine: a) quality of the steam at the end of the process, b) percentage of volume that is occupied by the saturated liquid at the final state, c) heat transfer with the surroundings per unit mass...
A weighted piston-cylinder device (pressure is not constant) initially contains 1.2 kg saturated liquid water at...
A weighted piston-cylinder device (pressure is not constant) initially contains 1.2 kg saturated liquid water at 190oC. Now heat is transferred to the water until the volume quadruples (increase four times) and the cylinder contains saturated vapor only. Determine: a) The final volume of the tank. b) The final temperature and pressure. c) The internal energy change of the water.
A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the...
A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the mixture is 40% liquid and 60% vapour by volume (State 1). A valve on top of the tank is opened, and saturated vapor is slowly withdrawn from the tank. Heat transfer occurs during this process such that the temperature in the tank remains constant. The valve is closed when 50 % of the initial mass is withdrawn from the tank (State 2) (a) Determine...
A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...
A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.
A rigid container has water of 2 kg at 120 C with a quality of 25%....
A rigid container has water of 2 kg at 120 C with a quality of 25%. The container is heated to the temperature of 140 Celsius, calculate the new quality?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT