An adiabatic rigid container, holding water initially at 100 kPa and 20oC, receives 209kJ/kg of paddle...

An adiabatic rigid container, holding water initially at 100 kPa and 20^oC, receives 209kJ/kg of paddle work. Determine the final temperature.

Expert Solution

genius_generous answered 2 years ago

5 kg of saturated water mixture in a rigid container initially at the standard pressure (state...

5 kg of saturated water mixture in a rigid container initially at the standard pressure (state 1) is heated at constant volumeto a pressure of 35 MPa (state 2). This heating is performed in such a way that the process passes through the critical point of the water: a) What is the volume in m3 occupied by the vapor phase and the liquid phase of the mixture at the initial condition (state 1)? b) Determine the change in internal energy...

A container contains water at 100 kPa. The specific volume of the water inside the container...

A container contains water at 100 kPa. The specific volume of the water inside the container is 1.00 m3/kg. What is the quality (x) of the water in the container, as a percentage and what is the phase of the water in the container?

A rigid 0.1 m3 container holds 1 kg of water, initially at 25?C. Calculate the theoretical...

A rigid 0.1 m3 container holds 1 kg of water, initially at 25?C. Calculate the theoretical minimum work required to increase the water temperature to the point where the water exists as a single phase. The environment temperature is 25?C.

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at...

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at 200oC, 1 bar. During an interval of 20 minutes, the paddle wheel transfers energy to the air at a rate of 1 kW. During this time interval, the air also receives energy by heat transfer at a rate of 0.5 kW. These are the only energy transfers. Assume the ideal gas model for the air, and no overall changes in kinetic or potential energy....

A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle...

A volume of 8.62 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 322 K, 0.4 bar. The air receives 481 kJ by work from the paddle wheel. Assuming the ideal gas model with cv = 0.71 kJ/kg • K, determine for the air the amount of entropy produced, in kJ/K.

A rigid container has water of 2 kg at 120 C with a quality of 25%....

A rigid container has water of 2 kg at 120 C with a quality of 25%. The container is heated to the temperature of 140 Celsius, calculate the new quality?

A 10 g ice cube at 0oC is melted in 100 g water initially at 20oC....

A 10 g ice cube at 0oC is melted in 100 g water initially at 20oC. The equilibrium temperature of the mixture is 10.93oC. Calculate: a) The heat lost by the water. b) The heat gained by the melted water of the ice cube. c) The heat absorbed by the ice to achieve melting.

An adiabatic tank contains 120 kg of liquid water initially at 70 °C. The water within...

An adiabatic tank contains 120 kg of liquid water initially at 70 °C. The water within the tank is utilized to quench (cool) a 15 kg steel block initially at 300 °C. The steel block is dropped into the tank, and after some time the steel block and the water in the tank reach thermal equilibrium. Determine the total entropy change during the quenching process. Specific heat of steel : Csteel= 0.50 kJ/kg*K. Specific heat of water : Cwater= 4.18...

Two kg of water exist initially as a vapor and liquid at 90°C in a rigid...

Two kg of water exist initially as a vapor and liquid at 90°C in a rigid container of volume 2.42 m3. (a)At what pressure is the system? (b)What is the quality of the system? (c)The temperature of the container is raised to 100°C. What is the quality of the system, and what is the pressure? What are ΔH and ΔU at this point relative to the initial state? (d)As the temperature is increased, at what temperature and pressure does the...

An adiabatic tank, 0.5 m3, is initially evacuated and charged with steam at 500 kPa and...

An adiabatic tank, 0.5 m3, is initially evacuated and charged with steam at 500 kPa and 300 C. The final tank pressure is 500 kPa. Determine the final temperature and the entropy production.

Question