The physical size of an synchronous generator has a profound effect upon its efficiency, power output,...

The physical size of an synchronous generator has a profound effect upon its efficiency, power output, relative cost, and temperature rise. Discuss and analyze why these characteristics are intimately related.

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

How is the active power regulated in a synchronous generator?

A 50 Hz synchronous generator is supplying 60% of its maximum power to an infinite bus...

A 50 Hz synchronous generator is supplying 60% of its maximum power to an infinite bus through a reactive network. Due to a certain fault, the reactance of the network between the generator internal voltage and the infinite bus is increased four times. After the fault is cleared, 80% of maximum power can be transferred Sketch the mechanical power vs. power angle curves, in the same figure, under the different operation conditions, and annotate all the key points on the...

The synchronous generator or alternator is an electrical machine that converts the mechanical power from a...

The synchronous generator or alternator is an electrical machine that converts the mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The synchronous motor always runs at a constant speed called synchronous speed. A three phase, 8 pole, synchronous Generator is coupled to a diesel engine running at 500 rpm. It supplies an induction motor which has a full load speed of 1440 rpm. Find the percentage slip and number of poles...

A nuclear power plant has an overall efficiency of 31% and a power output of 800MW....

A nuclear power plant has an overall efficiency of 31% and a power output of 800MW. For one year operating at full capacity, calculate a) the number of joules produced; b) the number of fission events that were required to produce those joules; c) the mass of uranium oxide (UO2) that has been used in fission; and d) the market cost of that uranium oxide if it was all high quality.

For synchronous generator to work at lagging PF and unity PF, which one have more efficiency?...

For synchronous generator to work at lagging PF and unity PF, which one have more efficiency? Why? (Ra is not equal to zero)

Define power. How are sample size and power related? How are effect size and power related?

IEEE Std 1110-2002 - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System...

IEEE Std 1110-2002 - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses a) Basic Information about the Standard: Name, number and issue date of the standard b) One to three sentences discussing what the specification covers (For example, “This standard covers the testing method of a synchronous machine to obtain the machine parameters…”). c) Answer the following question in your own words: Why is the standard important? (Obviously, if it wasn’t important, no standard...

1- A 480-V, 60-Hz, delta connected, synchronous generator has a synchronous reactance of 0.5 ohm and...

1- A 480-V, 60-Hz, delta connected, synchronous generator has a synchronous reactance of 0.5 ohm and Its rated Line current is 100 A. if the generator is connected to a 480V grid Draw the phasor diagram and find EA, delta angle and output power under the following conditions a- The generator supply the rated current at 0.8 PF lagging. b-The generator supply the rated current at 1.0 PF. c- The generator supply the rated current at 0.8 PF leading.

What is the gain material and its phase, typical pumping method, typical output power, and efficiency...

What is the gain material and its phase, typical pumping method, typical output power, and efficiency for laser of your choice producing tunable visible light?

A three phase, 60 Hz, 480 V, Y-connected, two-pole synchronous generator has a synchronous reactance of...

A three phase, 60 Hz, 480 V, Y-connected, two-pole synchronous generator has a synchronous reactance of 0.95 Ω per phase. Its armature resistance is negligible. Its combined friction and windage losses are 1.3 kW and its core losses are 0.95 kW. The field current is constant at no-load. Its full load armature current is 55 A at 0.9PF lagging. Assume phase voltage is a reference. Determine following: a) Its terminal voltage when it is loaded with the rated current at...

Subjects