Design an ultra-capacitor. Find an electrode geometry which maximizes the stored charge for a 100 cm3...

Design an ultra-capacitor. Find an electrode geometry which maximizes the stored charge for a 100 cm3 volume. Discuss possible physical limits for the design, including dielectric breakdown, leakage current, and mechanical stability. Assume the operating voltage is 16 V. Compare your design to performance of commercially available units (e.g.from Maxwell Technologies).

Expert Solution

genius_generous answered 2 years ago

1. How is the charge stored on a capacitor related to the capacitance of the capacitor...

1. How is the charge stored on a capacitor related to the capacitance of the capacitor and the potential difference across the capacitor? a. The charge equals the product of the capacitance and the potential difference. b. The charge equals the ratio of the potential difference to the capacitance. c. The charge equals the ratio of the capacitance to the potential difference. 2. Which do we do to find the potential difference of a capacitor? a. integrate the electric field...

1. (a) Find the charge stored on each capacitor in Figure 18.24 (C1 = 30.0 µF,...

1. (a) Find the charge stored on each capacitor in Figure 18.24 (C1 = 30.0 µF, C2 = 4.50 µF) when a 1.51 V battery is connected to the combination. C1 ___C? C2 ___C? 0.300 µF capacitor ___C? (b) What energy is stored in each capactitor? C1 ___J? C2 ___ J? 0.300 µF capacitor ____J ? 2.(a) What voltage must be applied to the 10.0 µF capacitor of a heart defibrillator to store 450 J in it? ____ kV ?...

Find the charge on the capacitor and the current in an LC-series circuit when L =...

Find the charge on the capacitor and the current in an LC-series circuit when L = 0.1 h, C = 0.1 f, E(t) = 100 sin(γt) V, q(0) = 0 C, and i(0) = 0 A.

Find the energy U0 stored in the capacitor. Express your answer in terms of A, d, V, and ϵ0.

Part A Find the energy U0 stored in the capacitor. Express your answer in terms of A, d, V, and ϵ0. Remember to enter ϵ0 as epsilon0. Part B The capacitor is now disconnected from the battery, and the plates of the capacitor are then slowly pulled apart until the separation reaches 3d. Find the new energy U1 of the capacitor after this process. Express your answer in terms of A, d, V, and ϵ0. Part C The capacitor is...

Find the charge on the capacitor in an LRC-series circuit at t = 0.05 s when...

Find the charge on the capacitor in an LRC-series circuit at t = 0.05 s when L = 0.05 h, R = 3 Ω, C = 0.008 f, E(t) = 0 V, q(0) = 4 C, and i(0) = 0 A. (Round your answer to four decimal places.) C Determine the first time at which the charge on the capacitor is equal to zero. (Round your answer to four decimal places.) s

Find the charge on the capacitor in an LRC-series circuit at t = 0.04 s when...

Find the charge on the capacitor in an LRC-series circuit at t = 0.04 s when L = 0.05 h, R = 1 Ω, C = 0.04 f, E(t) = 0 V, q(0) = 5 C, and i(0) = 0 A. (Round your answer to four decimal places.) ___________C Determine the first time at which the charge on the capacitor is equal to zero. (Round your answer to four decimal places.) _____________s

Design a differentiator circuit using a capacitor to have gain of 100. What is the output...

Design a differentiator circuit using a capacitor to have gain of 100. What is the output of the amplifier if the input is Vin = 0.05 sin 500.

Find the charge q(t) on the capacitor and the current i(t) in the given LRC-series circuit....

Find the charge q(t) on the capacitor and the current i(t) in the given LRC-series circuit. L = 1 h, R = 100 Ω, C = 0.0004 f, E(t) = 30 V, q(0) = 0 C, i(0) = 5 A q(t)= I(t) Find the maximum charge on the capacitor. (Round your answer to four decimal places.)

An MnO2(s) /Mn2+(aq) electrode in which the pH is 10.18 is prepared. Part A Find the...

An MnO2(s) /Mn2+(aq) electrode in which the pH is 10.18 is prepared. Part A Find the [Mn2+] necessary to lower the potential of the half-cell to 0.00 V (at 25 ∘C). Express your answer using two significant figures. [Mn2+] =

As the CFO of GES Corporation, which is a fashion design firm, you need to find...

As the CFO of GES Corporation, which is a fashion design firm, you need to find $5 million to expand the company's production. Research and discuss how the process of raising the $5 million would be different with the assistance of a financial institution versus raising the money directly from the financial markets?

Question