A 200 TR R-11 flooded chiller has an inlet water temperature of 20 C with mass...

A 200 TR R-11 flooded chiller has an inlet water temperature of 20 C with mass flow rate of water for chilling 30 kg/s. The evaporating temperature is 10 C and consider the overall heat transfer coefficient 1000 W/m²K, determine:

Leaving Water Temperature in C
Mean Log Temperature Difference in K
Chiller heat transfer area in square meter

Expert Solution

samet mamat answered 19 hours ago

Consider a chiller plant that has to provide a cooling capacity of 800 TR. Water-cooled chiller...

Consider a chiller plant that has to provide a cooling capacity of 800 TR. Water-cooled chiller with a cooling tower is adopted. However due to the availability of waste heat, two different chillers are studied: R-123 centrifugal chiller and LiBr absorption chiller. Some of the design parameters are already fixed: - Evaporating temperature at 5 ºC - Condensing temperature at 42 ºC - Chilled water temperature at 7 ºC and 12 ºC respectively - Condensing water temperature at 32 ºC...

The particulars of a 20 TR R 22 food freezer are as follows: Evaporator temperature –...

The particulars of a 20 TR R 22 food freezer are as follows: Evaporator temperature – 30°C Condenser temperature 40°C Temperature of vapor leaving evaporator – 25°C Subcooling of liquid with vapor in heat exchanger 5°C Polytropic index of compressor 1.15 Superheating of suction vapor after passing through suction valve 15°C Compressor clearance factor 0.05 Pressure drop in valves 0.2 bar suction 0.5 bar discharge The compressor has 6 cylinders with bore equal to stroke. Its rpm is 1500, and...

Water vapor goes into a diffuser at steady state, with inlet conditions of 800 kPa, 200°C...

Water vapor goes into a diffuser at steady state, with inlet conditions of 800 kPa, 200°C and velocity of 400 m/s. Superheated steam leaves the outlet at 2 MPa and velocity of 2 100 m/s. The inlet area of the diffuser is 14 cm . The system loses heat at the rate of 25 kJ/s to the surroundings. Neglect changes in potential energy between the inlet and outlet. What is the mass flow rate of the water vapor, in kg/s?...

An unknown mass of water (m1) of temperature 3.4°C is mixed with another unknown mass of...

An unknown mass of water (m1) of temperature 3.4°C is mixed with another unknown mass of water (m2) of 55.6°C. The combined mixture of water (m3) has a temperature of 26.1°C and a mass of 154 grams. Determine the mass of (m1) and (m2) WITHOUT using cwater= 4184 J/kg°C.

An iron block of mass miron = 1 kg at a temperature of Tiron = 200°C...

An iron block of mass miron = 1 kg at a temperature of Tiron = 200°C is thrown in sub-cooled water of mass m at Twater = 25°C enclosed in an insulated container. Calculate and plot in Excel or in similar programs the entropy generated as a result of the heat transfer process for a range of water mass values between 10 kg and 10,000 kg. (Please submit your Excel sheet or your computer program with the homework.

To one liter of water at an initial temperature of 20℃ is added 200 gm of ice at -5℃.

To one liter of water at an initial temperature of 20℃ is added 200 gm of ice at -5℃. Determine the final equilibrium temperature of the mixture, assuming the water/ice system is thermally isolated from its environment.

4. The horizontal wye fitting in the figure splits the 20?C water flow rate equally. Inlet...

4. The horizontal wye fitting in the figure splits the 20?C water flow rate equally. Inlet volumetric flow rate is 5 ft3/s and inlet pressure is 25 lbf/in2 (gage). In each branch water flow rate is split equally. If energy losses are neglected, estimate pressure of water leaving second and third branch. What is the vector force required to keep the wye in place?

A)Calculate the volume of 1.96 mol of liquid water at a temperature of 20 ∘C (at...

A)Calculate the volume of 1.96 mol of liquid water at a temperature of 20 ∘C (at which its density is 998 kg/m3) Express your answer in cubic meters to two significant figures. B)Calculate the volume occupied by 1.96 mol of steam at 200 ∘C. Assume the steam is at atmospheric pressure and can be treated as an ideal gas. Express your answer in cubic meters to two significant figures.

3 Kg mass of water is heated to a temperature of 99.5 C at 1 bar...

3 Kg mass of water is heated to a temperature of 99.5 C at 1 bar of pressure. It is slowly poured into a heavily insulated beaker containing 7.5 Kg of water at a temperature and pressure of 4 C, 1 bar, respectively. The specific heat of the water, an incompressible material is, c = 4.1 KJ/(Kg K). The beaker can be considered to be an adiabatic system. The two water mass’ reach an equilibrium temperature. There is no kinetic...

a) Determine the mass of water vapor, initially at 130 ° C, needed to heat 200...

a) Determine the mass of water vapor, initially at 130 ° C, needed to heat 200 g of distilled water in a 100 g glass container, to go from 20 ° C to 50 ° C. The specific heat of water vapor is 2.01x103 J / kg ° C, the specific heat of distilled water is 4.19x103 J / kg ° C, the latent heat of condensation of water vapor is 2.26x106 J / kg and the Specific heat of...

Question