Question

In: Electrical Engineering

12.5.1 - What bit in the TBxCCTLn register is used to put the CCR system into...

12.5.1 - What bit in the TBxCCTLn register is used to put the CCR system into capture mode?

Question 1 options:

CAP

CM

CCIS

CCI

12.5.2 - What bits in the TBxCCTLn register are used to control the edge polarity that triggers a capture?

Question 2 options:

CM

CAP

CCIS

CCI

12.5.3 - What bits in the TBxCCTLn register are used to select the source for the capture triggering signal CCI?

Question 3 options:

CAP

CCI

CCIS

CM

12.5.4 - How can a capture event be generated by software?

Question 4 options:

Use an external computer to send in an edge to the CCIxA bit.

You can set the trigger bits in the Status Register.

By resetting the CPU while the capture timer is running in the background.

By setting the capture mode to "both edges" and then toggling the input select lines between GND and VCC.

Solutions

Expert Solution


Related Solutions

Create a 4 bit register and explain how it works
Create a 4 bit register and explain how it works
3.21 [10] <§3.5> If the bit pattern 0×0C000000 is placed into the Instruction Register, what MIPS...
3.21 [10] <§3.5> If the bit pattern 0×0C000000 is placed into the Instruction Register, what MIPS instruction will be executed? 3.22 [10] <§3.5> What decimal number does the bit pattern 0×0C000000 represent if it is a floating point number? Use the IEEE 754 standard. Given the following 32-bit binary sequences representing single precision IEEE 754 floating point numbers: a = 0100 0000 1101 1000 0000 0000 0000 0000 b = 1011 1110 1110 0000 0000 0000 0000 0000 Perform the...
(7494) Design and implementation of 4 bit shift register using Behavioral style of modeling .... by...
(7494) Design and implementation of 4 bit shift register using Behavioral style of modeling .... by VHDL .. the program should based on the data sheet of 7494 and the truth table ... 13 input and one output D.
Write the Verilog code for a 12-bit shift register with ability to shift left or right,...
Write the Verilog code for a 12-bit shift register with ability to shift left or right, synchronized parallel load, asynchronous reset, and serial output? The register is able to load the 12-bit input value (at the positive edge of the clock) if the load signal is one, shift the value in register one bit to the right (at the positive edge of the clock) if the rss signal is one, shift the value in register one bit to the left(at...
(1) What is the most common technique used for finding duplicate blocks/data? A. Bit-for-bit comparisons on...
(1) What is the most common technique used for finding duplicate blocks/data? A. Bit-for-bit comparisons on all new blocks B. Hashing/fingerprinting C. Encryption D. Storing all blocks in an content addressable object store (2) Which of the following describes sub-LUN auto-tiering? A. Placing data on tiers depending on its access pattern B. Placing data on different tiers of storage based on when the blocks were written C. Placing data on tiers of storage based on the LUN name D. Placing...
C PROGRAMMING Build a hotel management program. The user will register their name and put their...
C PROGRAMMING Build a hotel management program. The user will register their name and put their check-in time and check-out time. They can choose their type of room they stay (Deluxe room, junior suite room, suite room, presidential suite room). Then, the program will determine the total price. *NOTE - Using modular, user-friendly, and array usage programming. Please don't use struct/structure and pointer. - Please give explanation about the code.
Write the VHDL codes for (7494) 4 bit shift register using Behavioral style of modeling. this...
Write the VHDL codes for (7494) 4 bit shift register using Behavioral style of modeling. this is the datasheet for this Quation ( http://www.ralphselectronics.com/productimages/SEMI-SN7494N.PDF )
4- a) Draw a 4-Bit Shift Register that shifts from right to left instead of left...
4- a) Draw a 4-Bit Shift Register that shifts from right to left instead of left to right using D-Flip flops. b) Draw the serial transfer from shift register A on the right to the shift register B on the left in block form including the timing diagrammes. c) Draw the serial transfer table in the following form, assuming an initial value of 1101 in the register A and 0110 in the register B. Timing Pulse Shift Register B Shift...
Suppose I have a 32 bit register containing 0000AC12 in hex and I do a logical...
Suppose I have a 32 bit register containing 0000AC12 in hex and I do a logical shift >>2. What hex digits will result from the binary shift? Be sure to show all 32 bits in hex
What is the purpose of the status register in PIC microcontroller architecture? Draw this register and...
What is the purpose of the status register in PIC microcontroller architecture? Draw this register and define the function of each of its bits. Find C, Z, and DC flag bits for each of the following codes: a) MOVLW 9FH ADDLW 61H C = , Z = , DC = b) MOVLW 82H ADDLW 22H C = , Z = , DC = c) MOVLW 67H ADDLW 99H C = , Z = , DC =
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT