Question

In: Computer Science

What is the maximum Ethernet II frame size? This value is calculated by combining the byte...

  1. What is the maximum Ethernet II frame size? This value is calculated by combining the byte values of _______ for the header, _______ for any data, and ____ for the FCS.

  1. A value of 0x0001 in an ARP packet’s Operation field indicates the packet is an ___Ethernet __? This field size is _____ bytes.

  1. A value of 6 in an ARP packet’s Hardware Size field tells you:

That Mac addresses are being used as the hardware type and the size of this address is 6 bytes in length.

  1. What is the maximum ARP packet size? How is this value derived (be specific)?

  1. For an ARP request, all the fields of the ARP packet are filled in except the target hardware address. Why?

  1. The following is an example of an ARP _______.

IP Address               MAC Address          Type

123.45.67.80             60:23:a6:f1:c4           Static

123.45.67.89             60:23:a6:21:e0          Dynamic

123.45.67.99             60:23:a6:c2:25          Dynamic

  1. The Address Resolution Protocol is defined in RFC _______, as of what month and year?

  1. The special Ethernet destination address of all one bits means the broadcast address for the local network. This value in hexadecimal is _______?

  1. What happens to a frame if the calculated checksum does not match the checksum on the frame?

  1. Explain the general aim of an ARP cache poisoning attack?

Solutions

Expert Solution


Related Solutions

1)     Look at the Ethernet frame. Based on the size of the field that holds the...
1)     Look at the Ethernet frame. Based on the size of the field that holds the MAC address, how long is a MAC address? 2)    What is the function of the last field in an Ethernet frame? 3)     List two LAN types other than Ethernet, (Ethernet being by far the most popular LAN type). 4)     Provide an example of an Ethernet MAC address.
Question 48 What is the minimum size of an Ethernet frame? Group of answer choices 64...
Question 48 What is the minimum size of an Ethernet frame? Group of answer choices 64 bytes 1,024 bytes 256 bytes 1,500 bytes Question 49 Data is organized into frames for transmission at which OSI level? Group of answer choices Application Network Data Link Transport Question 50 Which of the following devices does not limit network broadcast traffic and does not increase performance? Group of answer choices Router NIC Hub Switch Question 51 Which of the OSI layers does IP...
a crc 32 checksum in the final field of an ethernet frame serves what purpose?
a crc 32 checksum in the final field of an ethernet frame serves what purpose?
1. What is the most popular L. AN technology? 2. Describe how an Ethernet frame is...
1. What is the most popular L. AN technology? 2. Describe how an Ethernet frame is constructed. 3. What are the CSMA and CD technologies? 4. What are the advantages ofa VLAN? 5. Which WAN technology can reach transmission rates of up to 10 Gbps? 6. Which WAN technology is using circuit swtchiing technology? 7. Explain why a packet switch uses two sets of ports. 8. What are CSU and DSU? 9. What is the Internet? 10. How can hosts...
What is the maximum mass of S8 that can be produced by combining 84.0 g of...
What is the maximum mass of S8 that can be produced by combining 84.0 g of each reactant?
_______________is calculated by dividing GDP by the size of the population. _______________is the value of all...
_______________is calculated by dividing GDP by the size of the population. _______________is the value of all final goods and services produced in the economy during a given year, calculated by using the prices current in the year in which the output is produced. _______________is the total value of all final goods and services produced in a given year, calculated using the prices of a selected base year. _______________is the method of calculating real GDP using the average between the growth...
What is Frame Relay? What is its maximum throughput? What is its advantage and disadvantage?
What is Frame Relay? What is its maximum throughput? What is its advantage and disadvantage?
What is the total delay (latency) for a frame of size 5 million bits that is...
What is the total delay (latency) for a frame of size 5 million bits that is being sent on a link with 10 routers each having a queuing time of 2 μs and a processing time of 1 μs. The length of the link is 2000 km, The speed of light inside the link is 2 x 108 m/s, the link has a bandwidth of 5 Mbps. Which component of the total delay is dominant? Which one is negligible? useAPA...
Question 1) Given the byte value: 0xad a) What is the equivalent decimal notation as an...
Question 1) Given the byte value: 0xad a) What is the equivalent decimal notation as an unsigned value? b_ What is the equivalent decimal notation as a signed value? Question 2) Below are integer values and the location where each is stored, which may be an address in memory or a register: Value    Location 0xc       0x130 0x82     0x134 0x5       %rdi 0x134    %rsi What are the values of the following operands? You may answer in decimal or hexadecimal, but if you...
What are the factors that determine the sample size? How is sample size calculated for estimating the population mean? Provide examples.
  What are the factors that determine the sample size? How is sample size calculated for estimating the population mean? Provide examples.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT