You have 520 g of aluminum at an initial temperature of 350 °C. (Aluminum has a...

You have 520 g of aluminum at an initial temperature of 350 °C. (Aluminum has a specific heat capacity c = 0.214 cal/(g°C).) You place it into a beaker filled with 860 g of water at an initial temperature of 18 °C. (Water has a specific heat capacity c = 1.0 cal/(g°C).) Assume that no phase changes or chemical reactions occur during this time.

Calculate the final temperature of the aluminum~and water.

Calculate the amount of heat that enters the water.

Calculate the amount of heat that enters the aluminum

Calculate the amount of additional heat required to take the water you have, that was heated to the final temperature that you calculated in question 10, and convert it to steam at 100 °C.

Expert Solution

genius_generous answered 2 years ago

A hot lump of 32.9 g of iron at an initial temperature of 55.9 °C is...

A hot lump of 32.9 g of iron at an initial temperature of 55.9 °C is placed in 50.0 mL of H2O initially at 25.0 °C and allowed to reach thermal equilibrium. What is the final temperature of the iron and water given that the specific heat of iron is 0.449 J/(g·°C)? Assume no heat is lost to surroundings.

A hot lump of 43.0 g of iron at an initial temperature of 62.6 °C is...

A hot lump of 43.0 g of iron at an initial temperature of 62.6 °C is placed in 50.0 mL of H2O initially at 25.0 °C and allowed to reach thermal equilibrium. What is the final temperature of the iron and water given that the specific heat of iron is 0.449 J/(g·°C)? Assume no heat is lost to surroundings.

1. A 100 g ice cube at -10?C is placed in an aluminum cup whose initial...

1. A 100 g ice cube at -10?C is placed in an aluminum cup whose initial temperature is 70?C. The system comes to an equilibrium temperature of 20?C. What is the mass of the cup in kg. 2.Radiation from the head is a major source of heat loss from the human body. Model a head as a 20-cm-diameter, 20-cm-tall cylinder with a flat top.If the body's surface temperature is 36 ?C , what is the net rate of heat loss...

12a. A 0.260-kg piece of aluminum that has a temperature of -159 °C is added to...

12a. A 0.260-kg piece of aluminum that has a temperature of -159 °C is added to 1.0 kg of water that has a temperature of 2.7 °C. At equilibrium the temperature is 0 °C. Ignoring the container and assuming that the heat exchanged with the surroundings is negligible, determine the mass of water that has been frozen into ice. Number Units b. If the price of electrical energy is $0.09 per kilowatt·hour, what is the cost of using electrical energy...

The initial temperature of 140 g of ice is −22°C. The specific heat capacity of ice...

The initial temperature of 140 g of ice is −22°C. The specific heat capacity of ice is 0.5 cal/g·C° and waters is 1 cal/g·C°. The latent heat of fusion of water is 80 cal/g. a. How much heat is required to raise the ice to 0°C? b. How much additional heat is required to completely melt the ice after it has reached 0°C? c. How much additional heat is required to heat the water (obtained by melting the ice) to...

A sample of gas in a balloon has an initial temperature of 27 ∘C and a...

A sample of gas in a balloon has an initial temperature of 27 ∘C and a volume of 1290 L . If the temperature changes to 63 ∘C , and there is no change of pressure or amount of gas, what is the new volume, V2, of the gas?

Air at a pressure of 350 kPa, a temperature of 80°C, and a velocity of 180...

Air at a pressure of 350 kPa, a temperature of 80°C, and a velocity of 180 m/s enters a convergent–divergent nozzle. A normal shock occurs in the nozzle at a location where the Mach number is 2. If the air mass flow rate through the nozzle is 0.7 kg/s, and if the pressure on the nozzle exit plane is 260 kPa, find the nozzle throat area, the nozzle exit area, the temperatures upstream and downstream of the shock wave, and...

if you start with 580 g aluminum oxide and you isolate 250g of aluminum at the...

if you start with 580 g aluminum oxide and you isolate 250g of aluminum at the end what was your percent yield

An aluminum plate with a thickness of 2L=0.22m is initially at a temperature of To=250°C. The...

An aluminum plate with a thickness of 2L=0.22m is initially at a temperature of To=250°C. The plate is suddenly brought into contact with a fluid at a temperature of T∞=50°C, where the convection heat transfer coefficient is h=500 W/ m2K. Determine a. the mid-plane temperature at t=300 seconds. b. the total heat transfer from the plate to the fluid in 300 seconds if the surface area of one side of the plate is 1 m2 .

A 0.280-kg piece of aluminum that has a temperature of -166

Question