Discuss the ability of a sustainability review to effectively address all three “E’s” of sustainability effectively in the construction industry?

Find at least three advantages and three disadvantages of the HSMC architecture. Based on those findings, evaluate your confidence (scale 0– 1) on this particular hardware vision. By which decade, if ever, would you think that such an approach would be practical and in wide use?  

P.s do not worry about figure

Determine the pH of a solution that is 0.00596 M HCl and 0.0522 M HClO2. The ?a of HClO2 is 1.1×10−2 .

Question 4) If the effective pressure of the water in the pipe is 3 atm and in the case of h1 = 1m, h2 = 0.5m, h3 = 1m, h4 = 2m and h5 = 0.1m, determine the relative density of the fluid. (Accept that ρoil = 850 kg / m3, ρwater = 1000 kg / m3, ρhg = 13600 kg / m3, g = 9.81 m / s2. Neglect the pressure from the air at the height of h2.)

all informations have given

How are bacteria benefited in the process of water treatment even if they act as a catalyst?

08-5 Calculate and compare the hydraulic and TSS loadings (lb/d) from wastewater and stormwater for a 10-acre urban neighborhood. Assume the following:

*Wastewater: 5 houses/acre; 3.5 people/house; 50 gal/person/day; TSS = 200 mg/L

*Stormwater: 0.75 inch rainfall over 24 hours, 50% of rainfall runs off; TSS = 60 mg/L

Answer: WW load = 875 gpd, 14.6 lb/d; SW load = 101,820 gal/d, 51.0 lb/d

what's the difference between management and administration

Provide a definition of the following types of contracts, as it pertains to construction contracts:

Cost Plus Fee Contract

(a) Microorganisms play a role in the formation of hardness in groundwater. True or false? Explain.

(b) In the United States, chlorine is preferred as a disinfectant over ozone because it has a residual. Why is the presence of a residual important? In recent years ozone has been replacing chlorine as the primary disinfectant in the United States. What are the advantages and disadvantages of this?

Is my writing for the email correct? I mean grammatically and academy.

Dear Dr. Muller,
Greetings!
I would like to thank you for your assistance.
I looked at the offer from University of Manchester and I found that there were two conditions are master's degree with GPA of 3.2 or higher and Two satisfactory references issued on official headed paper, signed and dated by referees
I think I provided official transcript with GPA of 3.667 and two references to Dr.George on Oct 20, 2019.
Currently, I am studying master's degree in Physics at Columbia University in US. And I will graduate on Dec 14, 2019.
I will attach you all the required documents in this email. It is my kind request to you to help me to get a Final admission (unconditional) because this is a prerequisite by my sponsor to upgrade my scholarship from US to UK.
Thanks, and Best regards
Sam

1.As the earliest example of Gothic architecture, briefly describe how the exterior structure and interior decoration of the St. Denis Cathedral differs from previous forms of architecture.

2.Compare each of the cathedrals listed below to the St. Denis. How do their exterior structures and interior decoration differ from “the original” Gothic cathedral?

3. Study the Chartres Cathedral. Based on your study of the other cathedrals, explain why this one is considered the perfect example of Gothic architecture. Be sure the address both its exterior structure and its interior decoration.

In two or three sentences for each system, explain how redundancy is achieved in:

a. power transmission systems

b. highway systems

c. water treatment and distribution systems

d. source water supply

List down and describe how sonar survey is applied, and how depth and area are measured.

A circular saw blade (E = 200 GPa, v = 0,3) can be considered as a 2 mm thick disc with an outer diameter of 600 mm and central hole of 100 mm diameter bolted to a rigid inner rotating disc. Determine the maximum rotational speed if initial yielding of the disc occurs for a Tresca yield stress of 200 MPa.

Subject: Systems Engineering; Assignment Title: Producibility, Disposability, and Usability. Use your knowledge of human factors, and specifications to answer the following questions. 1.) According to the EPA, "Green engineering is the design, commercialization, and use of processes and products in a way that reduces pollution, promotes sustainability, and minimizes risk to human health and the environment without sacrificing economic viability and efficiency." How would you incorporate the EPA's concept of green engineering into an Airport Flight system design? Construct your answer with a focus on manufacturability and disposability.