Using Cascaded counter with use minimum number of blocks, design the following 1- MOD336 counter 2-...

Using Cascaded counter with use minimum number of blocks, design the following
1- MOD336 counter
2- MOD250 counter
3- MOD180 counter
4- MOD 360 counter

Solutions

Expert Solution

MOD336 Counter can be constructed by cascading MOD 16 counter with a MOD21 counter:

MOD250 Counter can be constructed by cascading MOD 2 counter with a MOD 125 counter:

MOD180 Counter can be constructed by cascading MOD 4 counter with a MOD 45 counter:

MOD 360 Counter can be constructed by cascading MOD 8 counter with a MOD 45 counter:

Manojponduru answered 2 hours ago

Next > < Previous

Related Solutions

1. design a mod-16 ripple down counter using positive triggered 2. design a synchronous counter to...

1. design a mod-16 ripple down counter using positive triggered 2. design a synchronous counter to count in the following sequence : 15, 9,, 11, 5, 2, 13, 1

A) Design 0?379 count?up counter with BCD counter blocks if input clear signal is synchronous. B) Design...

A) Design 0?379 count?up counter with BCD counter blocks if input clear signal is synchronous. B) Design 0?379 count?up counter with BCD counter blocks if input clear signal is Asynchronous. C) Design of 1/577 frequency divider with BCD count?up counters (Clear signal is Asynchronous)

Design a synchronous up down counter with the following binary sequence 1, 2, 4,5,7 using J-K...

Design a synchronous up down counter with the following binary sequence 1, 2, 4,5,7 using J-K Flip Flop

1) You are asked to design 4-bit Odd Number Count-Down BCD Counter making use of ONLY...

1) You are asked to design 4-bit Odd Number Count-Down BCD Counter making use of ONLY Falling Edge JK-flipflop(s) and logic gates. 2) Based on the requirements,write down: (i) state diagram (ii) excitation table (iii) input equations

Using Multisim, design a 2-bit, synchronous binary counter and verify that it counts in the right...

Using Multisim, design a 2-bit, synchronous binary counter and verify that it counts in the right sequence, Can count up or down and use any FF you desire; 4 screen shots in total: 1 for each input combination

Design the circuit that gives the total number of your school number as an asynchronous counter....

Design the circuit that gives the total number of your school number as an asynchronous counter. If 4 + 6 + 0 + 4 + 1 + 8 + 0 + 4 + 0 = 27, Mode 28 counter will be designed. FF with negative edge triggering will be used. You will definitely show the clock pulse, input and output connections of the FFs you will use. Otherwise, you will not get points because the counter will not work or...

Please write in multisim: Design 3 bit a synchronous counter to produce the following sequence: 0, 1, 2, 5, 3 then 0.by using...

Please write in multisim: Design 3 bit a synchronous counter to produce the following sequence: 0, 1, 2, 5, 3 then 0.by using J-K Filp Flop.. Please i need in multisim and Step of solution. Thanks!!

Design an up/down counter with four states (0, 1, 2, 3) using clocked JK flip flops....

Design an up/down counter with four states (0, 1, 2, 3) using clocked JK flip flops. A control signal x is used as follows: When x = 0 the machine counts forward (up), when x = 1, backward (down). Simulate using MultiSim and attach a simulation printout. Please address the following: State Table State Diagram Flip Flop Excitation Tables K-Map Simplification and Resulting Diagram MultiSim Simulation

Design a synchronous counter of four-bit using D flip‐flops and gates (AND, OR etc.) *use verilog...

Design a synchronous counter of four-bit using D flip‐flops and gates (AND, OR etc.) *use verilog language modules and test and explain briefly

design a counter that counts 0,3,2,4,1,5,7 and repeats using T-ff

Subjects