Question

In: Other

Example 2.7 Gas Phase Reaction Gas phase reaction is taking place in a continuous reactor. Stoicliioinetric...

Example 2.7 Gas Phase Reaction
Gas phase reaction is taking place in a continuous reactor. Stoicliioinetric proportions of

CO2 and H2 are fed to tile reactor at +00o C. The reaction proceeds to 80'a completion.
Given I mol of carbon dioxide, estimate the I)eat tllat dust be provided or removed, if tile
gas exit steams are to be kept at 500'C. Perform the energy balance using tile lleat of
reaction method at two reference teniperatuies (500'C and 25'C) and the beat of

formation method

Solutions

Expert Solution


Related Solutions

Example 2.7 Gas Phase Reaction Gas phase reaction is taking place in a continuous reactor. Stoicliioinetric...
Example 2.7 Gas Phase Reaction Gas phase reaction is taking place in a continuous reactor. Stoicliioinetric proportions of CO2 and H2 are fed to tile reactor at +00o C. The reaction proceeds to 80'a completion. Given I mol of carbon dioxide, estimate the I)eat tllat dust be provided or removed, if tile gas exit steams are to be kept at 500'C. Perform the energy balance using tile lleat of reaction method at two reference teniperatuies (500'C and 25'C) and the...
An elementary irreversible gas-phase reaction, A -> 2B, is taking place in an isothermal batch reactor....
An elementary irreversible gas-phase reaction, A -> 2B, is taking place in an isothermal batch reactor. Assume ideal gas behavior for both species. Initially, the reactor contains only the reactant A at a pressure of 5.0 atm, a volume of 20.0 L, and a temperature of 400 K. The rate constant at this temperature is 0.25 min-1. Find the time required for the concentration of A to drop below 5% of its initial value in these two scenarios: (a) A...
The reaction A + 2B  C + D is taking place in a batch reactor....
The reaction A + 2B  C + D is taking place in a batch reactor. (Cao =1M, Cbo = 3M k=0.001 (1/M^2*min)). a) Assuming an elementary rate law, find the time necessary to reach the conversion of 0.9. You can assume constant volume batch reactor with well mixing. Also form the stoichiometric table. (15 points) b) Sometimes it is hard to obtain numerical solutions to the complex integrals. Find the answer using trapezoidal, Simpson 1/3 and Simpson 3/8, Five-point...
A gas phase reaction takes place in a syringe at a constant temperature and pressure. If...
A gas phase reaction takes place in a syringe at a constant temperature and pressure. If the initial volume before reaction is 60 mL and the final volume after the reaction is complete is 40 mL, which of the following reactions took place. (Note: You can assume that you start with stoichiometric amounts of the reactants, the reaction goes to completion and that the gases behave ideally.) 2NO(g) + O2(g)->2NO2(g) 2NO2(g)->N2O4(g) 2NOBr(g)->2NO(g) + Br2(g) 2N2O5(g)->2N2O4(g) + O2(g) 2N2O5(g)->4NO2(g) + O2(g)
The following reversible gas-phase reaction is carried out in a 10 L batch reactor. A <->C...
The following reversible gas-phase reaction is carried out in a 10 L batch reactor. A <->C -rA = CA – 0.5CC [mol/(L h)] Determine the pressure, temperature, and gas phase composition (mole fractions) in the reactor after 1 hour of operating adiabatically given the following initial conditions and physical properties and the assumption of ideal gas behavior: P0 = 100 kPa, yA0 = 0.5, yC0 = 0.1, yinert=0.4, T0 = 500 K. cpA = cpC = 10 J/mol K, cpinert...
The irreversible elementary reaction 2A > B takes place in the gas phase in an isothermal...
The irreversible elementary reaction 2A > B takes place in the gas phase in an isothermal tubular reactor. The feed is one mole of A per one mole of C, an inert. The entering temperature and pressure are 427°C and 10 atm, respectively. The gas constant R = 0.08206 atm · L/mol · K. (a) Determine the concentration of A at the entrance to the reactor. (b) If CA0 = 1.0 mol/L, what is the concentration of A at 90%...
10. The Kc value = 2.7 for the following water gas reaction at a given temperature:...
10. The Kc value = 2.7 for the following water gas reaction at a given temperature:                         CO(g) + H2O(g)
Chemical Engineering Question 100 mol/minute of propane gas is burned completely in a continuous reactor with...
Chemical Engineering Question 100 mol/minute of propane gas is burned completely in a continuous reactor with air to form carbon dioxide and water. Develop an Excel spreadsheet to calculate the adiabatic flame temperature if the gasses are fed at 30oC, 1atm for the following cases: % Excess Air = 0%, +10%, +25%, +50%, +75%, +100%, +150%, +200% Use heat capacity data from Table B.2 for all components in the combustion reaction.Turn in a hard copy of the Excel spreadsheet as...
The reaction shown was studied in the gas phase observing the change in pressure as a...
The reaction shown was studied in the gas phase observing the change in pressure as a function of time. Given the data below, determine the order of the reaction. ClC(O2)CCl3= 2COCl2 TIME (sec) 0 181 513 1164 P (mmHg) 15.76 18.88 22.79 27.08
in the gas-phase reaction A + B --> C + 2D, it was found that when...
in the gas-phase reaction A + B --> C + 2D, it was found that when 2 mole A, 1 mole B, and 3 mole D were mixed and allowed to come to equilibrium at 25oC, the resulting mixture contained 0.79 mole C at a total pressure of 1 bar. calculate (a) the mole fractions of each species at equilibrium, (b) Kx (c) K and (d) deltarGo
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT